6G Celicas Forums

This is for those who are completing and who have completed your swaps. What do you have left to do on your car before you can "stick a fork in it" and say you are done.

Mine is:

1. recirculate BOV
2. add second magnaflow muffler
3. new tires
4. install skirts and lip
5. clear sidemarkers and tail light mod
6. repaint calipers and hubs
7. do something with my seats

1. put my motor back together.
2. finish up the exterior.
3. tint the windows
4. maybe some more suspension work


Start saving for my next project car.

1. (DONE) New Battery
2. (DONE) Get Boost Guage to work
3. Probably get all new mounts
4. Fix Speedometer (probably just not plugged in)
5. (DONE) Fix 3rd gear shift grinding
6. (DONE) New fuel pump (got one, installing tonight or this weekend)

This post has been edited by gtfc115: Mar 19, 2006 - 8:01 PM

1. Fix powersteering.
2. Finish IC piping.
3. Install Boost Gauge.
4. Fix short axle problem.
5. Install MBC
6. Figure out why my car vibrates when I get on the gas.
7. Install supra BPV.

1, 3, 4 are going to be done this weekend and 2 and 7 will be done by next weekend.

1) Wiring harness..
2) Fiberglass full interior (Gonna be fun?)
3) Cut up hood
4) Cut up front bumper
5) Rims
6) Side skirts and new rear bumper
7) Enjoy?

-Dustin

as my boy jesse would say:

"all thats left is EVERYTHING"

starting the harness conversion this weekend, once thats done, everything else is cake.

put the motor in
wire it up

lose about 500lbs of car weight
some >=9" wide wheels
fmic, exhaust, single turbo

unless someting unexpected comes up...

1. full 3in exhaust with magnaflow muffler
2. greddy EBC
3. try to get my AC working
4. enjoy the car

This post has been edited by lagos: Mar 10, 2006 - 1:09 PM

i finally got it running yesterday after having my tranny welded (one of the bolts that hold the linkages broke off) still some loose ends to tie up.

1) Cover remaining wires from extension
2) fix high idle 1500
3) hook up oil temp guage
4) get better radiator
5) front mount

It's street legal and 'drivable', but for me to be able to call it done i am gonna pull the motor again and clean up the engine and figure out what is my problem with the clutch. For now its in the body shop getting some dings out of her


-FAQ

- headgasket
- replace water pump
- thermostat
- koyo radiator
- change my bov to recirculate
- build my tvis controller and fcd
- wire up my safc again
- get my fuel pressure guage hooked up
- get a package from ATS
- want a dual stage boost controller
- remove all ac equiptment
- loss more weight
- get a magnoflow muffler
- get a larger fmic
- get new struts
- get new rims
- re-tint to a darker %
- re paint the car a darker grey silver
- lightend flywheel
- jdm lights all around
- get ahold of some stock fenders

yeah its sad, i have alot of plans but not enough money.
someday i plan to "complete" my car.

i just got my engine out from my clip, and it's been sitting in my garage for months now, due to school work and what not,

so everything else needs to be done,

i've got about 2 mths to complete is before my gf comes over and i can take her out for a spin.

will be coming here alot for my qns.. thanx guys.

It's not a 6GC, but here's what's left to do on my 7

Bolts ons & Porting -
3" dp to remote 3.5" cutout
Reprogram TPS
Remove EGR, ACV, Air Pump
3" TID
Port Internal wastegate
port intake manifold

FUEL - 750cc secondary injectors w/ Rtek 1.7 chip w/ walbro 255

That's all gotta be done in the next 3 weeks before the track opens. Sooner or later I'll go balls out with the big turbo, standalone, streetport, blah blah blah

Install:
Shocks/Struts
3'' exhaust
AVCR
Apexi EGT & Boost Gauge
LSD Axles
Fix shifting issue
PAINT!

can this include me? although not a 4 turbo,
I have into going, a 20V trueno.
implant was easy, what it needs i'm crying
a look and diagnosis of the doc's great wiring.

So far no spark, but all else is done,
stacks and a header, with suspension as one
so close to running, but time I don't have,
can't even run codes, so the doc can rehash,
the other problem of course is cash... =[

Still needs some wheels tires and paint...
along with an engine that can cause you to faint,
this car will be worth my time, I suppose,
especially once finished, it can finally be sold.
to pay off my bills before they get old.

This post has been edited by Kwanza26: Mar 15, 2006 - 8:58 PM

1.) E153 tranny... In progress
2.) FMIC .. next
3.) AVC-R
4.) AFC

In the near future a turbo upgrade. prolly go 20g.