6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> 17 inch wheels, will they fit
post May 2, 2006 - 1:25 PM
+Quote Post
nowitzon



Enthusiast
*
Joined Apr 6, '05
From homosassa,florida
Currently Offline

Reputation: 0 (0%)




my friend has a srt4 and he is selling his wheels,theyre not stock,i think theyre foose. we put them on my car while it was jacked up and they seemed to fit fine i was just wondering anyone think ill run into any problems with them,my car is lowered by a eibach sportline package.any feedback would be appriciated


--------------------
FOR 21 YEARS I DEALT WITH THE RAIN,
ONLY TO FIND OUT THAT I COULD STOP THE PAIN,
SO NOWITZON!!!
post May 2, 2006 - 2:07 PM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




There are many people with sportline springs running 18" wheels, so 17" will not be a problem. As long as the bolt pattern is 5X100 and the offset isn't too terrible it should work just fine. Ideal offset would be +35. That would be flush with the body, but people have different offsets. My rims are +42, which makes them sit in a little bit, but don't get anything lower than +35, as that would stick out from the side, like an ugly trash lowrider.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post May 2, 2006 - 4:13 PM
+Quote Post
nowitzon



Enthusiast
*
Joined Apr 6, '05
From homosassa,florida
Currently Offline

Reputation: 0 (0%)




theyre actually a tiny bit thinner than my tires but trhyre taller is theyre that much room in the wheel well?


--------------------
FOR 21 YEARS I DEALT WITH THE RAIN,
ONLY TO FIND OUT THAT I COULD STOP THE PAIN,
SO NOWITZON!!!
post May 2, 2006 - 6:05 PM
+Quote Post
Clipsetuner



Enthusiast
***
Joined Sep 12, '03
From Portland , Oregon , United States
Currently Offline

Reputation: -1 (33%)




I seem to recall that they are 5x114 because my buddy sold his SRT4 wheels to my other friend with a RX7.

DTE


--------------------
I am a thief.
do not buy anything from me.
post May 2, 2006 - 7:51 PM
+Quote Post
lilsteeg



Enthusiast
***
Joined Jan 16, '06
From Lima, ohio
Currently Offline

Reputation: 0 (0%)




QUOTE(Clipsetuner @ May 2, 2006 - 6:05 PM) [snapback]429205[/snapback]

I seem to recall that they are 5x114 because my buddy sold his SRT4 wheels to my other friend with a RX7.

DTE

wouldnt the offstets be off due to the diff in fwd-rwd
post May 2, 2006 - 10:38 PM
+Quote Post
Clipsetuner



Enthusiast
***
Joined Sep 12, '03
From Portland , Oregon , United States
Currently Offline

Reputation: -1 (33%)




QUOTE(lilsteeg @ May 3, 2006 - 12:51 AM) [snapback]429253[/snapback]

QUOTE(Clipsetuner @ May 2, 2006 - 6:05 PM) [snapback]429205[/snapback]

I seem to recall that they are 5x114 because my buddy sold his SRT4 wheels to my other friend with a RX7.

DTE

wouldnt the offstets be off due to the diff in fwd-rwd


Most of the time you can make them work either way, if there a genearl offest.

DTE


--------------------
I am a thief.
do not buy anything from me.
post May 3, 2006 - 1:42 AM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




QUOTE
Most of the time you can make them work either way, if there a genearl offest.


Maybe the wheel this guy has is 5-lug universal.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post May 3, 2006 - 8:18 AM
+Quote Post
Digndoug



Enthusiast
*****
Joined Aug 20, '03
From Annapolis, Md
Currently Offline

Reputation: 5 (100%)




QUOTE(95CelicaST @ May 3, 2006 - 2:42 AM) [snapback]429394[/snapback]

QUOTE
Most of the time you can make them work either way, if there a genearl offest.


Maybe the wheel this guy has is 5-lug universal.

LMAO, your kidding right? rolleyes.gif
Ok, I went to Tirerack.com and it says the bolt pattern for the neon srt-4 is a 5x100, so they should work fine.

I have scion tc wheels, which are 17x7 and they fit great, they do raise the car a bit more, which i nice for my lip kit.

This post has been edited by Digndoug: May 3, 2006 - 8:21 AM
post May 3, 2006 - 9:57 AM
+Quote Post
WannabeGT4



Enthusiast
*****
Joined Oct 10, '03
From Wichita, KS
Currently Offline

Reputation: 5 (100%)




QUOTE(95CelicaST @ May 2, 2006 - 2:07 PM) [snapback]429126[/snapback]

There are many people with sportline springs running 18" wheels, so 17" will not be a problem. As long as the bolt pattern is 5X100 and the offset isn't too terrible it should work just fine. Ideal offset would be +35. That would be flush with the body, but people have different offsets. My rims are +42, which makes them sit in a little bit, but don't get anything lower than +35, as that would stick out from the side, like an ugly trash lowrider.


I know you're probably just passing on information you've read, but you cannot make suggestions about offset without knowing the wheel's width. I wrote a how-to for this exact reason:

Wheel Offset Guide


--------------------
IPB Image
Project ST204.5 99.88946% complete...
post May 3, 2006 - 1:35 PM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




QUOTE(Digndoug @ May 3, 2006 - 6:18 AM) [snapback]429429[/snapback]

QUOTE(95CelicaST @ May 3, 2006 - 2:42 AM) [snapback]429394[/snapback]

QUOTE
Most of the time you can make them work either way, if there a genearl offest.


Maybe the wheel this guy has is 5-lug universal.

LMAO, your kidding right? rolleyes.gif
Ok, I went to Tirerack.com and it says the bolt pattern for the neon srt-4 is a 5x100, so they should work fine.

I have scion tc wheels, which are 17x7 and they fit great, they do raise the car a bit more, which i nice for my lip kit.


Universal 5 lug is 5X100 and 5X114. So go "LMAO" to that.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post May 3, 2006 - 1:56 PM
+Quote Post
playr158



Enthusiast
*****
Joined May 22, '03
From NOVA
Currently Offline

Reputation: 16 (100%)




QUOTE(95CelicaST @ May 3, 2006 - 2:35 PM) [snapback]429552[/snapback]

QUOTE(Digndoug @ May 3, 2006 - 6:18 AM) [snapback]429429[/snapback]

QUOTE(95CelicaST @ May 3, 2006 - 2:42 AM) [snapback]429394[/snapback]

QUOTE
Most of the time you can make them work either way, if there a genearl offest.


Maybe the wheel this guy has is 5-lug universal.

LMAO, your kidding right? rolleyes.gif
Ok, I went to Tirerack.com and it says the bolt pattern for the neon srt-4 is a 5x100, so they should work fine.

I have scion tc wheels, which are 17x7 and they fit great, they do raise the car a bit more, which i nice for my lip kit.


Universal 5 lug is 5X100 and 5X114. So go "LMAO" to that.


i think he LMAO because you said OEM str4 wheels are universal rims...when they only have 1 bolt pattern @ 5x100

This post has been edited by playr158: May 3, 2006 - 1:57 PM
post May 3, 2006 - 2:03 PM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




In the 1st post he says "They're not stock"

I know OEM wheels are one pattern, but since he says they are not the stock wheels I asked about universal 5-lug.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post May 3, 2006 - 2:20 PM
+Quote Post
playr158



Enthusiast
*****
Joined May 22, '03
From NOVA
Currently Offline

Reputation: 16 (100%)




a good point...put if foose...then its most defenitly a 1 pattern rim
post May 3, 2006 - 2:21 PM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




yes probably true.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post May 3, 2006 - 5:53 PM
+Quote Post
nowitzon



Enthusiast
*
Joined Apr 6, '05
From homosassa,florida
Currently Offline

Reputation: 0 (0%)




yes theyre not stock.they are foose rims and the size of the tires are 205 50 17 what im worried about is they look awfully tight in the well should i have any problems turning at all? hes also selling his stock turbo that wouldnt fit would it,i know stupid question i just wanted to know


--------------------
FOR 21 YEARS I DEALT WITH THE RAIN,
ONLY TO FIND OUT THAT I COULD STOP THE PAIN,
SO NOWITZON!!!
post May 3, 2006 - 9:15 PM
+Quote Post
playr158



Enthusiast
*****
Joined May 22, '03
From NOVA
Currently Offline

Reputation: 16 (100%)




no the turbo won't fit
post May 4, 2006 - 10:21 AM
+Quote Post
nowitzon



Enthusiast
*
Joined Apr 6, '05
From homosassa,florida
Currently Offline

Reputation: 0 (0%)




damn well there goes that ideathanks tho


--------------------
FOR 21 YEARS I DEALT WITH THE RAIN,
ONLY TO FIND OUT THAT I COULD STOP THE PAIN,
SO NOWITZON!!!
post May 16, 2006 - 6:53 AM
+Quote Post
AussieBoy

Enthusiast

Joined Apr 21, '06
From Australia
Currently Offline

Reputation: 0 (0%)




I was thinking the same thing, and as you can see a 19" rim will fit with no problems.
post May 16, 2006 - 9:00 AM
+Quote Post
Clipsetuner



Enthusiast
***
Joined Sep 12, '03
From Portland , Oregon , United States
Currently Offline

Reputation: -1 (33%)




I found out today that they were a mutilug rim, and factory SRT4 is 5x100.

nowitzon - me and you are a testament that 19"s fit, dont you just love how 19"s raise the car so much, I reccomend coil overs I dropped mine on Tech-S's and still is a monster truck.

BTW I am going bigger then 19"s now....

DTE


--------------------
I am a thief.
do not buy anything from me.

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 3:46 AM