6G Celicas Forums

Hi 6gcers
Had anyone got HIDs in their celica?
I'm looking at buying some in the near future.
Some I'm looking for recommendations

Thanks

HELLA HIDS... the authentic ones kick ass.... i have them in my custom projectors

Hella ballasts with Eagle Eye 8000k bulbs.

i bought these from the GB....CoWay 6000K HIDs



if u want brightness go higher temp ratings...if u want durability go 6000K ...made a world of a difference than oem/super white bulbs

This post has been edited by DeW_H0e_GT: May 31, 2006 - 9:00 AM

how much do these run? and where can you usually get them? i had a problem with some hyper white bulbs before, they kept burning out the socket that they plug into...toyota tried to charge me $1200 for a wiring harness!

I want my celica to look like yours when it grows up how much did your kit cost you????? a

I bought my HIDs here... Highly recommended. A few other members bought them here as well.

http://www.oznium.com/hid?sid=2479cb2231c1...3ca666f6f378c97

I just bought a pair for my SC300. =)

the body kit??.....pm boostd6g..i think about 350 shipped for jus the front n sides.....the hid i bought was $235 shiped...

another note:....^^^ the store where chanh is directing...they got good HIDs..^^^^ check em out...

Sorry to bring up an old thread... I dont even have my celica anymore - but was thinking about getting some HIDs for my new car and see these kits on ebay for like $150 shipped... anyone used those?

those look liek itll work....

BTW, im sellin my hids for $140 shipped if u want em....

The explorer uses 9007's... I am guessing you have 9006s. What temp would you recommend? Why you selling?
Thanks,
Todd

This post has been edited by MK153: Jul 30, 2006 - 12:49 AM

the bulbs on the celica is differ for the high and lows yes? does that mean that i have to buy two differ bulbs for the highs and lows if i want them to be HID?

Yes.. the lows a 9006s and the highs are 9005s if I remember correctly.

tsx projectors in the jdm housings w/ osram 4300k d2s bulbs and matsush_ita ballasts (i think they are the most compact ballasts out there):









This post has been edited by elvasoshexai: Jul 30, 2006 - 1:41 AM

so to get this confusion i have corrected...i will end up with a total of "4" main HID ballast(s)...one for each of the lights? how will the wires connect for all the 4 ballasts and will it have uneven or equal power transmitting through all of the ballasts?

you don't need HID for your high beams.. it's probably a bad idea too.. HID isn't made for flashing (which what highbeams is usually for)... you'll kill your HIDs like that.. plus HIDs take a few seconds to 'warm up' before they are full power... which defeats the purpose of flashing... you can have HID foglights though...

i hv 2 ballasts.. wiring harness 1 end to battery... 1 end to each ballast 1 ground... also hv 2-3 fuse and relay... i thnk

This post has been edited by elvasoshexai: Jul 30, 2006 - 1:53 AM

i kindly thank you for your input, i really appreciate it a lot...im not using it to flash anyone...i live in dark mountain passes and i like to have maximum light with the use of the high(s)...thanks for your tip though...i might reconsider...

my point was kind of more that once you get HIDs... there really is no use for high beams once you have HIDs... having just HIDs on lowbeams already gives a very wide and far beam

This post has been edited by elvasoshexai: Jul 30, 2006 - 2:03 AM

I have a question for everyone who are using HID + JDM projectors cuz im interested in getting both. As projectors as been made for RHD celicas, if you dont open and modify them for an LHD use, does they dazzles a lot other drivers on the left side of the road?
thx !