6G Celicas Forums

Welcome Guest ( Log In | Register )

2 Pages V   1 2 >  
Reply to this topicStart new topic
> here's a question, what do you experts think?
post Aug 11, 2003 - 4:43 PM
+Quote Post
AJcelica

Enthusiast
*
Joined Sep 13, '02
From BC, Canada
Currently Offline

Reputation: 0 (0%)




everyone is always asking about the 3sgte swap and about the AWD conversion, but does anyone know what kind of 1/4 mile times the fully swapped FWD celicas pull? also, how much would a completely swapped celica weigh? stock ST204s are famous for their light weight and handling capabilities, but does this still hold true for post swap celicas?

i'm just in a thinking mood today i guess rolleyes.gif biggrin.gif
post Aug 11, 2003 - 5:12 PM
+Quote Post
97sccelica



Enthusiast
*****
Joined Aug 30, '02
From Anaheim, CA
Currently Offline

Reputation: 0 (0%)




the 3sgte does not weigh too much more than a 5sfe, it is the same series block

as for times, i dont know of anyone that has taken a fwd 3sgte celica to a track.

my guess is 14's with a stock 2nd gen 3sgte. but it will depend on the driver, with that much power it will be very easy to screw up your launch


--------------------
1994 Celica GT4 WRC Edition
@gt4.wrc on Instagram
post Aug 11, 2003 - 5:44 PM
+Quote Post
AJcelica

Enthusiast
*
Joined Sep 13, '02
From BC, Canada
Currently Offline

Reputation: 0 (0%)




QUOTE (97sccelica @ Aug 11, 2003 - 3:12 PM)
the 3sgte does not weigh too much more than a 5sfe, it is the same series block

as for times, i dont know of anyone that has taken a fwd 3sgte celica to a track.

my guess is 14's with a stock 2nd gen 3sgte. but it will depend on the driver, with that much power it will be very easy to screw up your launch

true enough... i'm with you on this one, but that's just my super inexperienced guess biggrin.gif

is the ST185 really not that much heavier than the 5sfe? hmmm... i guess it is negligeble when you add how much power difference there is wink.gif

what about if the 3sgte wasn't stock? could it drop blow 14 sec with bolt ons and other misc modifications?

-AJ
post Aug 11, 2003 - 5:46 PM
+Quote Post
SpedToe169



Enthusiast
***
Joined Aug 29, '02
From Dallas, Tx
Currently Offline

Reputation: 0 (0%)




I think a swap would easily do high 13s with a good driver and proper setup. My car weighs 2400lbs right now, I don't think it would be very difficult to maintain that weight in post swap condition. Ask again in 6 months and I'll probably be able to tell you. smile.gif
post Aug 12, 2003 - 3:59 AM
+Quote Post
97sccelica



Enthusiast
*****
Joined Aug 30, '02
From Anaheim, CA
Currently Offline

Reputation: 0 (0%)




QUOTE (AJcelica @ Aug 11, 2003 - 3:44 PM)
QUOTE (97sccelica @ Aug 11, 2003 - 3:12 PM)
the 3sgte does not weigh too much more than a 5sfe, it is the same series block

as for times, i dont know of anyone that has taken a fwd 3sgte celica to a track.

my guess is 14's with a stock 2nd gen 3sgte.  but it will depend on the driver, with that much power it will be very easy to screw up your launch

true enough... i'm with you on this one, but that's just my super inexperienced guess biggrin.gif

is the ST185 really not that much heavier than the 5sfe? hmmm... i guess it is negligeble when you add how much power difference there is wink.gif

what about if the 3sgte wasn't stock? could it drop blow 14 sec with bolt ons and other misc modifications?

-AJ

well, the thing is, you can do the basic mods and up the boost(and disable the fuel cut) and make a lot more power.

but then it would be very very hard to get traction. but from a rolling start it would kill most cars on the road.


--------------------
1994 Celica GT4 WRC Edition
@gt4.wrc on Instagram
post Aug 12, 2003 - 10:02 AM
+Quote Post
Supersprynt



Enthusiast
*****
Joined Feb 10, '03
From Connecticut
Currently Offline

Reputation: 11 (100%)




You gotta go reallly really easy at start - the swapped 3sgte's have no LSD and therefore you spin, alot.


--------------------
post Aug 12, 2003 - 1:16 PM
+Quote Post
AJcelica

Enthusiast
*
Joined Sep 13, '02
From BC, Canada
Currently Offline

Reputation: 0 (0%)




ooh, that kinda sucks... i'm all about the fast starts rolleyes.gif

sigh... i suppose there aren't any ways around this unless you put super grip tires up front eh?

unless there is a way around this that i'm not thinking of biggrin.gif
post Aug 12, 2003 - 1:22 PM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




Did any of the trannies that were mounted up to a 3S-GE(ST202/3 Celica, Curren, Altezza, etc.) come with a LSD? If so, you could probably swap in one of those trannies fairly easily and then you'd be able to get better traction off the line. smile.gif


--------------------
New Toyota project coming soon...
post Aug 12, 2003 - 1:39 PM
+Quote Post
boosted_K2



Enthusiast
*****
Joined Aug 30, '02
From Michigan
Currently Offline

Reputation: 0 (0%)




the curren 3sge trans had LSD i believe. and i would say the 1/4 times should be in the high 14s. cuz if you measure it up against a mr2 which does a 1/4 in 14.6. if you take into account mid engine RWD and the 400 LBS weight difference, the 2 should come out fairly even, but i couldnt see a swapped celica winning. of course im speaking with no mods performed to either car besides the 2nd gen 3sgte swap with all factory parts. if it was a 3rd gen swap with LSD i could definalty see a swapped celica taking out a stock MR2t.


--------------------
IPB Image
Believer, you'll leave her, in leaving them all
No but I don't buy it
Like anything you do, as anyone you are
Cause I'm...
Ten Speed, of God's Blood & Burial
post Aug 12, 2003 - 2:03 PM
+Quote Post
AJcelica

Enthusiast
*
Joined Sep 13, '02
From BC, Canada
Currently Offline

Reputation: 0 (0%)




QUOTE (Coomer @ Aug 12, 2003 - 11:22 AM)
Did any of the trannies that were mounted up to a 3S-GE(ST202/3 Celica, Curren, Altezza, etc.) come with a LSD? If so, you could probably swap in one of those trannies fairly easily and then you'd be able to get better traction off the line. smile.gif

that's one way around the tire spin and it would save people from having to look for the rare camry v6 tranny biggrin.gif

oh and by the way, did you get my e-mails coomer? i never got a reply to any of them about the group buys confused.gif

This post has been edited by AJcelica: Aug 12, 2003 - 2:03 PM
post Aug 12, 2003 - 2:27 PM
+Quote Post
Four

Enthusiast
*
Joined Aug 30, '02
From tacoma WA
Currently Offline

Reputation: 0 (0%)




i think only one guy in a 6th gen with a st185 motor has done the 1/4 mile.

he pulled a 14.2
post Aug 12, 2003 - 3:01 PM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




14.2 is pretty quick, and I'm guessing that you could break into the 13s fairly easily with that engine and some basic bolt-on mods.

And to AJCelica, I think I got your last email, but I'm not sure what happened to it. Could you maybe resend it to me?


--------------------
New Toyota project coming soon...
post Aug 12, 2003 - 3:25 PM
+Quote Post
AJcelica

Enthusiast
*
Joined Sep 13, '02
From BC, Canada
Currently Offline

Reputation: 0 (0%)




wow 14.2 is quick! and that was stock, just engine swap?

coomer: absolutely biggrin.gif
post Aug 12, 2003 - 6:19 PM
+Quote Post
TunerHawk

Enthusiast
*
Joined Jun 26, '03
From Los Angeles
Currently Offline

Reputation: 0 (0%)




Ask TRD. They made a LSD for 6GC st204's so it is likely they make one able to be swapped!!!
post Aug 12, 2003 - 7:12 PM
+Quote Post
phat94celi

Enthusiast
**
Joined Oct 9, '02
From Longmont, CO
Currently Offline

Reputation: 1 (100%)




QUOTE (Coomer @ Aug 12, 2003 - 11:22 AM)
Did any of the trannies that were mounted up to a 3S-GE(ST202/3 Celica, Curren, Altezza, etc.) come with a LSD? If so, you could probably swap in one of those trannies fairly easily and then you'd be able to get better traction off the line. smile.gif

Dont think the Altezza tranny would work seeing as how it is RWD!
post Aug 12, 2003 - 7:41 PM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




QUOTE (phat94celi @ Aug 12, 2003 - 4:12 PM)
QUOTE (Coomer @ Aug 12, 2003 - 11:22 AM)
Did any of the trannies that were mounted up to a 3S-GE(ST202/3 Celica, Curren, Altezza, etc.) come with a LSD? If so, you could probably swap in one of those trannies fairly easily and then you'd be able to get better traction off the line. smile.gif

Dont think the Altezza tranny would work seeing as how it is RWD!

Probably not. I didn't even think about that. wink.gif


--------------------
New Toyota project coming soon...
post Aug 12, 2003 - 7:46 PM
+Quote Post
phat94celi

Enthusiast
**
Joined Oct 9, '02
From Longmont, CO
Currently Offline

Reputation: 1 (100%)




tongue.gif
post Aug 12, 2003 - 8:41 PM
+Quote Post
Junior

Enthusiast
***
Joined May 5, '03
From Toronto
Currently Offline

Reputation: 3 (100%)




When you swap the 3sgte you'll have to use a different tranny, the 5sfe tranny will bolt up and so will the tranny from the V6 camry. TRD makes a LSD for the 5sfe.
post Aug 12, 2003 - 10:38 PM
+Quote Post
snadman



Enthusiast
****
Joined Oct 1, '02
From Minnesota, USA
Currently Offline

Reputation: 0 (0%)




I know a guy that gets 12s. jhull at toyotacelicas.com. He's got a 5th with a 3sgte swap...not a awd conversion.


--------------------
95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE

02 WRX --> This is for speed
- Borla Exhaust
- TurboXS BOV
- Custom CAI

02 Civic EX
- MB Quart Reference 5.25" Components
- Rockford MTX 8" Subs in the doors
- Alpine Type S Rear Fills
- 2x Alpine SWR-1042D Subs in a custom fiberglass box
- Alpine F345 Amp for the front doors
- Alpine M605 on each Type R
- Phoenix Gold wiring
- Alpine CDA-9855 Head Unit
- Alpine Amp link
- 2x Rockford Fosgate 1 Farad Caps
- The best Viper 791 alarm install ever
post Aug 12, 2003 - 11:01 PM
+Quote Post
SpedToe169



Enthusiast
***
Joined Aug 29, '02
From Dallas, Tx
Currently Offline

Reputation: 0 (0%)




Don't forget that traction control is a possibility. Its really very simple when using an aftermarket ecu (like the autronic that I'll be going with). Its just a matter of adding some wheel speed sensors and telling the computer whats up.

With traction control thats properly tuned and an LSD a swap will do mid 13s easy. The comparisons with the mr2 are not really valid as it weights a lot more, 4-500lbs more. The general rule of thumb is 100~0.1sec. FWD is a bit of a disadvantage when its not set up right, but it can be made to work quite well. Get some drag radials, spring for the lsd (at least a phantom grip, they're really cheap. Get a quaife if you have some dough), and you're in the 13's deep.

Just because its not easy and cheap doesn't mean its not possible!

2 Pages V   1 2 >
Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 20th, 2025 - 4:26 AM