6G Celicas Forums

That Topic is wrong. PZ402-14440-AB it's not JDM lip. It's Euro dealers option part (so it's actually EDM OEM lip )



More about European dealer's option parts here.





I see

Malpaso,

I have some questions. Are those the numbers for the SS-III blocks without the gt-four writing in them?
And have you checked the prices lately to see if it was with or without the spoiler?

Price of 750$ is for the raiser blocks. Cuz i clearly know what in EU Dealerships they cost about 250Eu each.

I can supplie Raiser Blocks without GT-four writing for 180$ shipped (pair ofcorse)

Romas

Does the raiser blocks have the GT-4 writing on them, Do raiser blocks come out with the SS-111 celica ? dont they only come with the GT-4 model?

^^^ Take a look up and you will see what SSIII came equiped with teh Riser Blocks.

GT-Four from 94 till 98 (WRC models i think) came with the blocks what had a Writing kinda pressed in them.
After 98 GT4's came with the blocks what has a GT-Four sticker on the blocks.

SSIII from 98 came with the blocks you can see in the pics ^up.

I can supplie either Blocks with the GT-Four writing pressed in them or just clean blocks WITHOUT any writing on them.

SSIII / or 98-99 GT-four Stickers can be ordered at Dealerships.

Seems I made (thanks to local dealer) "mistake". Those numbers I have posted...



...are not from JDM SS-III celica but from Euro GT-four. That means numbers are right, but there are GT-four raiser blocks for Euro GT-four -> with pressed GT-Four writing. That's why I looked again (and better) for real SS-III raiser's numbers and I have found interesting thing. In EPC for JDM models are raisers shown like this:



And there is just one part number only for that... so it must be part number for spoiler(wing) and raiser blocks together!!! See what i got below:

02/94-10/94 (WRC models) 76085-20918
09/93-08/95 (All liftback models) 76085-20915*, 76085-20920*
08/95-12/97 (All liftback models) 76871-20911*
12/97-08/99 (GT-four and SS-III) 76870-20916 -> so far... seems this is what we are really looking for
12/97-08/99 (SS-I and SS-II) 76871-20911

This is complete list for JDM models (everything you can find). Two post, three post, w or w/o raisers,... And numbers with '*' are same for Euro and US market as well!!! There are no other numbers for non-JDM markets but those "mistake" GT-four Euro raisers. I'll check everything with Toyota dealer today and I'll let you know . I like mysteries .

note: whether I'm right or not, best way still is just buy replicas from doGGy (for three reasons):
1. you mostly already have just spoiler
2. price is much lower than genuine part
3. you know what you buying for sure...

EDIT: I have some info from Toyota (Europe) about that:
- If I would like to buy just raiser blocks only chance are those Euro GT-four I mentioned first time
- All spoilers above can be ordered, but for some of them they can't guarantee what exactly will come (because they guarantee parts for local market only), so no one would know for sure if will come just spoiler or with raisers... complete list what you can find (for hatch) you can see below:

02/94-10/94 (WRC models) 76085-20918
pure JDM part, rare and bloody expensive! About $3900... What that should be? Just spoiler??? I can't believe that...
09/93-08/95 (All liftback models) 76085-20915, 76085-20920
common US, JDM and Euro parts. Both just two post spoilers, price $1100
08/95-12/97 (All liftback models) 76871-20911
common US, JDM and Euro parts. Just three post spoiler, price $1050
12/97-08/99 (GT-four and SS-III) 76870-20916
pure JDM part, no other info available , price $1350. But if you want my opinion, I believe it's really spoiler with raiser blocks (w/o letters) cuz there is no other way how get them for JDM celica.
12/97-08/99 (SS-I and SS-II) 76871-20911
same three post spoiler like above, price $1050

02/94-06/96(GT-four raiser blocks) RH: 76088-20914, LH: 76087-20916
are available only for European market (not JDM parts), price is $750 for pair
11/93-08/99(All liftback models) PZ402-14451-AB
Euro dealer option two post spoiler, available for European market. Spoiler is a lot smaller (left in the picture below), can't be used with raiser blocks!!!



so... I would need edit my topic a bit about SS-III spoiler... thanks for comments (and thanks to Gerald for pics ).

This post has been edited by malpaso: Jan 19, 2007 - 5:17 AM

Thanks for the info I got the tacho eventually.
Do we have any part numbers for engine parts here?
I have my second beams engine sat in my garage and was going to have a good look at this one as I dont want to touch the one I have in my ST conversion!

Kev

Anything you need, just give me a PM btw. YOU HAVE TWO BEAMS ENGINES IN YOUR GARAGE???!!! Unbelievable... I'm green with envy

PM sent

so i went to toyota today trying to oder the grill, they can't/won't get it cause toyota canada does not have access to any europeon or japan parts, wtf??

Nice thread, lots of info. But it is a crazy thing to buy everything from the dealer. I counted over 10.000 $ But I wish I had a Tom's lip and couple of splitter, then projectors lamps and so on, and so on It is a crazy thing

You are right . I have lot of part from dealer, however also many of them from e-bay (e-bay is always your friend )


yea... that should be like that... In Europe dealers has no problem with that, but I have headr US and CND has . If you would like to have anything just PM me and I'll find out shipping...

I can confirm that the numbers below are for the ones on the picture. I ordered these and they are the ones from the picture.

81511-20680
81521-20660

i love this man! was at the toyota parts dispact warehouse and me and a guy there where going through the EPC to find the jdm tails and celica stills....done all my work for me i love you!

with that climate control thingy can it just plug stright in and there climate control???

also can we get a part number please on a CLEAR 3rd brake light??? cheers

also can any one confirm the clear bumper turns for the 93-95 models....?

also with the celica enbeded door stills is that part (the metal) bit a clip on tot eh plastic bit that goes along the whole way...can i just get the metal bit or do i need to the other bit aswell?

This post has been edited by 3s-gte_man: Aug 23, 2007 - 10:05 AM

Nope, the clear brake light is not an OEM part, it is custom-made by a member on here (wolfie).


Ditto. OEM clear turns are only available as an option for the facelift front, which was fitted to cars manufactured between 1996 and 1999. Clear turns for 93-95 cars are available as a custom job from wolfie.


You need both bits.

This post has been edited by BloodyStupidDavey: Aug 23, 2007 - 10:32 AM

thanks for the quick reply davey!

just got prices from toyota in AUS and the metal "celica" sill insert is 132 with 10% gst each and the sill plastic trims for them are 121 each

the JDM tails ar RH 231.00 and LH 214.00

and the jdm head lights low beam projector RH 870 and LH 905 high beam is 339 each side

that alot more than i though i think i'll stick to ebay for now...lol

all prices in AUD and with austrlian goods and services tax of 10% and all shipping etc!

this is the part nu for the grill i want. Where can we get this in the US?????

yo malpaso my man!
can you punch in a part no: for my tom's ful option lip please. thanks -R6