6G Celicas Forums

quick update,...we were gonna go pickup the car tomorrow, but because of the lack of imformation the US customs agency gives, we have to pick it up on saturday. So my weekend is gonna consist of driving about 5 hours, taking off a front bumper, deck lid, tail lights, spoiler, doing some quick body work, wiring, welding and painting. The front bumper on the car has some paint missing, aswell as on the rear its got a section that was hit at a slow speed that is dented in, so im gonna b fixing the work thats already been done on it *pulled out, but not finished over* by puttin some bondo down, sanding it out, smoothing it out and then painting it. Then im also gonna b taking off the spoiler the guy put on him self, patching up one of the holes that im not gonna b needing any more, and just puttin some small rubber patches over the other ones untill our TRD wing makes its way here from Jersey. Also, i might be puttin the side skirts on if i got the time and enough paint. Oh, and cant forget, i gotta wire up some daytime running lights too...yay..

Bryan again, so good news, Sarah is now a full fledge 6gc owner. We went down to pick it up yesterday, had a great drive down and back, cleared the boarder in like 15 min. So every thing is going great. But since we saw the car in the dark last time, i didnt get a full good view of it, so there was some downsides to it, a few rust spots, a bit of paint cancer, and some good stone chips. So we spent about 5 hours today working on it together, we smoked the turns and side markers, re-finished the roof and front bumper, cleaned the interior, and fixed one of the seat belts. So i spent about 2 hours wet-sanding the roof, but unfortunatly, i couldnt save it, so i had to do a quick rattel can spray job on it. For a rattel can spray job + clean coat, it turned out good, same with the front bumper. Also changed all the headlight bulbs, also i put my old "celica" badge on the back of the car. So ill let the pictures do the talking.
When we got it..







Working




after wet-sand






after smoking and clear coat





This post has been edited by Keroppi: Jul 21, 2007 - 4:34 PM

very nice. enjoy the new ride. wet sand does miracles.

congrats you 2, just give it some love and it'll turn out just fine

todays update, didnt do any thing majour, just wired up daytime running lights, changed the cluster bulbs to blue, installed her shift knob and shift boot and re-upholstered her arm rest. Ill post pics tomorrow, too tired now.

congratulations dude to you and sara good find... now we need a mini meet

This post has been edited by behindthesmile: Jul 16, 2007 - 8:31 PM

didnt get a chance to get any pics of the arm rest or any of the work i did yesterday, but heres what im doing..well...actually right now. im sanding and fixing up the rims we got with the car.


Sarah took 2 of them home, so im fixing up the ones we have here. Im gonna clean em up *clear coat is coming off, and im gonna b painting them bronze probably tomorrow b4 we go out and get my old tires off my 15's onto it.

and after a bit of work and sore arms, the finished product, i did a bit of hacky job on this one, but the others im gonna do better.





i still gotta clear coat it tomorrow and give it another coat of bronze.
Whadda u think??

This post has been edited by Valo666: Jul 17, 2007 - 11:27 PM

Nice job on rims. I was digging those rims when I saw them on Tirerack, and the fact that they are German made was even better. They look like they are only 15' rims, but you are making them bling once again!

Your passion for the Celi and fixing it is up is admirable, and to have such a supportive woman by your side that wants to own one too is even sweeter! Don't lose her!

todays update. I managed to finish two of the wheels, the other too are pretty curb rashed, so im taking some extra time to re-finish them. But sarah really wanted them on her car, so i decided to get only the front two put on. They look really good, but makes me remember why i needed to lower my car.
Pics


hehehe..i decided to spray her hub caps bronze too so they wouldnt stand out so much

and why i need to lower it...

i could have easily fit another 2 fingers above my hand too.

Also i decided to install my old bass tube in her car. It sounds decent, and it was just laying around in my garage so why not.
Installing

*sry the pic is so dark*
and the only wiring you see through the entire install


ill get a better pic of the full tube when i take her other rims out of the trunk in a few hours.

next work to be done is re-painting/re-finishing her hood, installing back wheels, full brake job, new shocks and maybe some s-techs, and installin her TRD spoiler that should b arriving sometime within the next week.

This post has been edited by Valo666: Jul 21, 2007 - 4:37 PM

The car drives really nice and seems solid, but dude, you NEEEED to get rid of that alternator whine. It's SO bad...

i know...im gonna check the wiring again today when shes off work, if it keeps up, im just gonna find her a cheap sub and box and throw it in with my old amp instead.

so quick update...sarah's birthday is coming up at the end of the month, so as an early b-day present to her, i bought her a set of s-techs. So we spent a week up at my cottages and came home and her car was nice and low. Changed the look of the car sooo much. It rides alot nicer now too cuz we had all 4 corners shocks blown.


you can see the difference that the S-techs make too...
BEFORE:

AFTER:

How much were the s-techs??

Congrats to Sarah! That's so awesome

on a side note I wish I had a boyfriend that would spontaneously do things for my car! Sarah your a lucky lady

after 20 minutes of waiting for my pc at work to load all the photos.


GOD DAMN! Those S-techs SLAMMED that car..a full HAND to barly 2 fingers...NICE

Great work. so..when u bringing both down to the USA? specificly the East Coast region? lol

$237 from JRP in missisuaga with tax. I think they have another set instock too


Well i have 2 loves...sarah and cars...so when one of them wants me to do work on the other...im always happy. I still got plenty more work ahead for it..im just waiting for a sertain EC6GC member to send me a spoiler.....



We are probably gonna head back your way for next years DWG meet....im workin full time now and sarahs gonna b working full time and going to school..so we wont be able to get too many days off. But next years DWG meet we are both gonna b there, and im gonna try and convince Nader to come down too.

sweet find! nice work on the rims!

more work done...sarah started her new job..well..new location, same job today, so i had the day 2 my self to just do what i wanted to do...so whats there to do on a saturday afternoon with some friends??...work on the car...again....nothing majour today, we spent a bit of time working on sarahs car and a bit of time working on my buddies intrepid thats been sittin for a month and a half while he was away in Lebanon.

My freaking messy shop..i just had every thing every where cuz i had so much on the go..


Any ways, todays updates are:
Painted small sections of the car to cover up dents and scratches...i did a light sand with some 800 gritt then just masked and sprayed..im gonna wet sand tomorrow to blend the colours a bit better.




Then i also tryed to work on the hood..when we got it, it was a little fadded, but nothing too bad...but after i tryed to use some of that nufinish crap on it..it made it sooooo much worse...so i decided to wet sand it to bring some of the luster back in...didnt work..just like the roof...so i painted it too..but i dont have any pic of the finished product yet...so heres a teaser..


also i did some engine bay dressing up...aswell as a well needed oil change


i got bored too and decided to make some of the inteiror look a bit better too...sarah wants to keep a full black interior, so she wants to do a black headliner sometime..but untill then, shes just gonna have to deal with the gray one and the map light and mirror painted black...


ill take some more pics tomorrow after i do some more work....what im gonna be doing...i dont really know..probably brake job and re-finishing her other 2 rims.

Whats the paint u used for the wheels? like whats the exact color called? Thanks