6G Celicas Forums

im interested in the manual swap parts...how much are you looking to get for it all?

interested in sun visors, only if in perfect condition

Do you still have the VALVE COVER and top INTAKE MANIFOLD COVER? If so, please let me know!

the 7afe motor is not up for parts. i do have the manual conversion parts. 120shipped for it all (pedals, shift tower, clutch pedal comes with sensors, clutch master cyl)

[quote name='Sinyk' date='Jun 12, 2007 - 1:54 PM' post='567733']
Any chance you have the passenger side trim like in the picture?



[/quote]

yes i do have that piece. 30 shipped

[quote name='xquickwitx' date='Jul 14, 2007 - 2:43 PM' post='578588']
ok I need the A/C radiator/condensor whatever you want to call it. Its just infront of the engine radiator. I tried to recharge it and I found the little pin hole where someone's tire or something threw a rock and bent up the fins a bit and nailed one of the ribs across. Does anyone think if I JB weld it, that it will hold?

<update> nope, pressure found a new way through the JB
[/quote]

yeah i have it somewhere i will take a look for that piece.

[quote name='Aaagogo' date='Jul 18, 2007 - 6:01 PM' post='580003']
ur pm mailbox is full

would you sell the 4 injectors without the rail?
[/quote]

i emptied it. yeah ill sell them seperate. make me an offer.

[quote name='2fast4u94' date='Jul 19, 2007 - 9:23 AM' post='580211']
Hey, I was wondering if you had all the plastic covers the go underneath the car in the front. The protective covers covering the engine and front bumper?

Thanks,
Melvin
[/quote]

no i no longer have those plastic pieces.

[quote name='stephen_lee' date='Jul 19, 2007 - 12:32 PM' post='580279']
hey man, do you have the windshield washer pump??
how much would you like shipped to 77901?
[/quote]

i shall take a look i believe its still in the engine bay but it has been a while since i checked.

[quote name='96celica25thann' date='Jul 19, 2007 - 2:21 PM' post='580306']
tail lights for sale? pix?
[/quote]

yes! i will get you pics by tomorrow.

[quote name='doGGy' date='Jul 19, 2007 - 2:45 PM' post='580315']
Looking for the airtubes that go driver side airvent! One tube is bolted on the dash, second one is going from the heater core to the one that is bolted...

Please let me know..
[/quote]

hmmm i have the dash tore out so i shall take a look. pics tomorrow.

[quote name='bdog_v' date='Jul 19, 2007 - 6:27 PM' post='580378']
-Parts I am looking for, black seats front and rear, black carpet, center armrest, top headliner.

I have the money now if parts are available,


Thanks,

Brandon
[/quote]

ok my seats are grey center with black outsides, i have the black carpet its near immaculate being the low miles my parts car had 80k. headliner is too hard to ship. and the armrest is gone. make me an offer on the carpet

[quote name='yyet' date='Jul 21, 2007 - 11:07 AM' post='580860']
Will a ST oil pan fit on my 94 GT?
[/quote]

no im sorry the ST has the 7"A"fe motor and the GT has a 5"S"fe motor. the A & S family motors do not interchange parts.

[quote name='garygarrett1' date='Jul 26, 2007 - 12:28 PM' post='582647']
[quote name='celicast3sgte' post='503886' date='Nov 19, 2006 - 10:41 PM']
I have for parts a 94' black ST coupe with 79k miles. anything you want let me know. i have some pics ill post below. anything else post and ill get pics or we can make a deal.

EDIT: Also have a full manual swap for the ST, Shift tower, ST cables, ST master cyl (high miles), ST slave cyl (high miles), ST hard and soft lines, Clutch pedal assembly with both working sensors and smaller brake pedal. (160shipped for this)

1 good ct26
1 core ct26 with shaft play
1 2nd gen fuel rail with injectors


2nd gen rail and resistor pack?

both fans work great

low miles pads & rotors (doubt anyone will actually want these)

94' ST airbox w/ air temp sensor

2nd gen 3sgte Headgasket OEM toyota, NEW



Anything else you are looking for just ask i have a lot left over between my white and black ST coupes.
[/quote]


ECU? Do you still have it available?


OH yes I need a passenger window as well.
[/quote]

ECU sold. i do have the passenger window though. make me an offer.

Stock Air Box with temp sensor. How much? And will it include all the necessary bolts?

This post has been edited by FortuneCookie: Jul 28, 2007 - 11:47 PM

Do you still have this? Last owner of my celi cut holes in mine.




If so, how much shipped to 84653?

im not sure what shipping would be on this piece... 50shipped?



i dont have the bolts but it is for sale

Do you by chance have:

Manual shift boot
stock intake box
center console (just the top part attached to the cup holders)
Rear GT brakes?

Ok great. Thank you. Please let me know if you find the condenser. It's threatening 100 degrees here in Louisiana and I'm melting in my car. If/when you find it, let me know what the total will be shipped to 71105. Once again thanks alot.

i found it. someone (not myself) set a heavy box ontop of it when i moved. its bent pretty good. i wouldnt trust it. i would suggest posting a thread "wtb: a/c rad condensor" im sure youll find one in no time!



same for you 40 shipped no bolts

infact..... hes got one!!

vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

>http://www.6gc.net/forums/index.php?showtopic=50740&hl=<
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This post has been edited by celicast3sgte: Jul 31, 2007 - 9:22 PM

bump. im going to finish stripping some pieces out of this beast and then send the shell (black ST 94) off to a scrapper. anybody have some last requests?

washer pump?

Did it have a sun roof? Are the wheel well liners any good?

I guess that's better than the $103 for a new one. I have to drive to Denver for a few days, I'll PM you when I get back to work out payment.

ok, sounds good lemme know!



no sunroof and the liners are gone



ill look for that bad boy and let u know if i find it 35 shipped

how much for your 3rd gen resistor pack and the shipping to montreal,canada, h7t 2s6

tanks

Do you happen to still have the driverside rear wheel bearing assembly thats in working condition? I'm hurtin for one...

I cant sell the wheel bearing the car needs to stay rolling. and the resistor pack has already been sold.