6G Celicas Forums

Hey I wanna get with the radiator cooling plate a short shifter black with red and the black with red padded arm rest cover. Ill send payment to you vincent on tuesday but let me no i can get it from stevenson when i see him if he has those in stock. Thanks

Shift boot + armrest cover at US$60.00 shipped or US$35.00 per item or USD$60 for 2 items, just wanna move on and clean up the little inventory we have.

Will ship out straight from Hong Kong

Short Shift Boot - 3cm shorter than the stock one
1 x Black with Light Blue stitching
1 x Black with Black stitching Sold to MaskedMan
1 x Black with Red stitching
1 x Black with White stitching

Regular Shift Boot
1 x Black with Yellow stitching
1 x Black with Red stitching
1 x Black with Light Blue stitching

Regular/Non Padded Armrest Cover
2 x Black with Yellow stitching
1 x Black with Black stitching
1 x Black with Red stitching
1 x Black with White stitching


There are some more inventory that take care by Culpable04 and ship out from NJ

Padded Armrest Cover - Exclusively for USDM 6GC (Correct me if I am wrong)
Black / red padded armrest cover
Black / black padded armrest cover

Regular/Non Padded Armrest Cover
2 black / yellow non padded armrest cover
1 black / black non padded armrest cover
1 black / white non padded armrest cover

Regular Shift Boot
1 Black / white shift boot
Black / red shift boot
Black / black shift boot
[/quote]




You can send me another $60 for the combo, the padded armrest cover would ship or pick up 2gether with plate. the short boot I would ship once payment receive.

Vince

This post has been edited by vincent_doggy: Feb 10, 2008 - 5:07 AM

Yeah it is kinda a defect.

With (Yes heat and pressure) it does start to shift and move and shrivel mostly. It'll also happen to your doors. I have a convertable and MAN! i need to do something with those doors...

I'll be pm-ing soon abut a armrest cover; I'm trying to find an automatics version of a shift boot..

(Stoopid automatic)

This post has been edited by D-Man: Feb 10, 2008 - 11:18 AM

who do i paypal for the black/red padded armrest and matching shift boot?

Can you make a Black with Silver Stitching Short Shift Boot?

This post has been edited by celicadude04: Feb 10, 2008 - 8:50 PM

Pm'd


This post has been edited by vincent_doggy: Feb 11, 2008 - 10:57 AM

PM'ed

i deleted my pms and im not sure if i specified that i need SHORT-shifter boot ? sorry guyz!

Here's the answer

This post has been edited by vincent_doggy: Feb 11, 2008 - 1:24 PM

ok payment will be sent tomorrow thank you.

Bump

This post has been edited by vincent_doggy: Feb 25, 2008 - 5:24 AM

Shift boot + armrest cover at US$60.00 shipped or US$35.00 per item or USD$60 for 2 items, just wanna move on and clean up the little inventory we have.

Will ship out straight from Hong Kong

Short Shift Boot - 3cm shorter than the stock one
1 x Black with Light Blue stitching
1 x Black with Black stitching Sold to MaskedMan
1 x Black with Red stitching Sold to supershannon77
1 x Black with White stitching

Regular Shift Boot
1 x Black with Yellow stitching
1 x Black with Red stitching
1 x Black with Light Blue stitching

Regular/Non Padded Armrest Cover
2 x Black with Yellow stitching
1 x Black with Black stitching
1 x Black with Red stitching
1 x Black with White stitching


There are some more inventory that take care by Culpable04 and ship out from NJ

Padded Armrest Cover - Exclusively for USDM 6GC (Correct me if I am wrong)
Black / red padded armrest cover
Black / black padded armrest cover

Regular/Non Padded Armrest Cover
2 black / yellow non padded armrest cover
1 black / black non padded armrest cover
1 black / white non padded armrest cover

Regular Shift Boot
1 Black / white shift boot
Black / red shift boot
Black / black shift boot

This post has been edited by vincent_doggy: Mar 3, 2008 - 2:51 AM

I want a black/black padded rest and a black/black regular shift boot...
any left, who do I paypal to?

no more padded left, I have the shift boot

Alright, so I got my short shifter boot from Hong Kong a few weeks ago. I tried to put it in my car a week ago and the fitment is not so good. The metal ring is not wide enough. After I try to insert the ring in the four little little slots, it is not snug enough. The boot shifts around when I move the shifter and the boot eventually falls down through the shifter hole. This is very easy to install, but it is just not fitting well enough.

I should not have to modify this either since I paid for it! HELP!

I have the same problem with mine. I tried pulling the metal square out wider to hold on better, but boy, that metal sure holds it shape well. I must have done something though, because it is holding better and hasn't fallen out since.

sorry guys, I would ask the shop to aware the width of the metal ring

Celicav, I believe that metal are flexible and feasable to bend and still holds its shape well.

1 question, since the upper plastic ring are same as stock, do u mean the upper part can't stop the boot falling down or?


This post has been edited by vincent_doggy: Mar 7, 2008 - 10:22 AM

No, no, I should not have said "ring". I'm talking about bottom, rectangular part. The metal frame is not wide enough. The stitching is snug and tight around the frame, and bending it up is not going to do the job. Please allow me send it back! I will exchange if you promise me u can get one that fits. I guess you just got a out of spec set of these things from the shop. I realize mistakes happen, but I would appreciate an exchange for one that is correct or a refund. Thanks!

My computer gave a double post, so just ignore this "message"

This post has been edited by Celicav: Mar 7, 2008 - 5:48 PM

Celicav, mind to post a pics here or PM me the pics

I would make another one for ya, keep the defective one and no need to send that one back to me.

Mind to paypal me $5 bucks to cover the mailing cost?

Relax and be patience, will let ya know once ship!!

But I need pics, just be fair to me, ok?

Vince