Exhaust advice, how much performance can be gained by a 2.25 exhaust |
Exhaust advice, how much performance can be gained by a 2.25 exhaust |
May 7, 2008 - 1:30 PM |
|
Enthusiast Joined Apr 15, '08 From Powder Springs GA Currently Offline Reputation: 0 (0%) |
Hi, I am new to the site and I have had my 94 gt since january. I enjoy the site a lot. I have searched the forums about this but stilll have a few questions. I have a ebay cai (mostly for the sound as I dont know if it helps performance much), but I want to try something else to improve the cars performance. My celica has 112k miles on it and I cant afford to turbo. I have read about different members exhaust setups and I think I want a 2.25 with resonator and magnaflow muffler. I am graduating at the end of may and will have some cash to spend. Can anyone tell me about the performance to be gained from this exhaust set up or if there is something else i can do to the car that will be a better use of money(possibly ebay headers?). The car is my daily driver so it has to pass emissions. Any advice would be appreciated. thanks
|
May 7, 2008 - 2:17 PM |
|
Enthusiast Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) |
Better low end torque and better top end from then the factory 2" exhaust piping. Reason being is that your allowing the engine to "breath" more easily by reducing back-pressure and having a better flowing exhaust flow due to the the increased pipe diameter. I've been from 2.5" and recently downgraded to 2.25" on my pipe diameter and I noticed that I have more torque on my bottom to mid rpms and haven't sacrificed any high end power since the 2.5" piping. So yeah, I recommend 2.25" to everyone with a 2.0 to 1.6L engine and anything higher than a 2.0 go with 2.5" piping.
This post has been edited by netrata: May 7, 2008 - 2:21 PM -------------------- |
May 7, 2008 - 2:59 PM |
|
Enthusiast Joined Dec 20, '07 From Valkeakoski, Finland Currently Offline Reputation: 0 (0%) |
what is a resonator? pics?
-------------------- |
May 7, 2008 - 3:27 PM |
|
Enthusiast Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) |
Here's my 2.25 exhaust setup. This is an under-axle catback consisting of a magnaflow high flow cat. converter, 20" 2.25" inlet/outlet magnaflow resonator, and a 2.5" megan racing n1 muffer. This was put together by a local exhaust shop.
And a Video Clip: http://www.youtube.com/watch?v=1kHzpSc3D1Y Here is what I used: Magnaflow Cat. Converter Magnaflow resonator/muffler Megan Racing N1 muffler BTW, the overall tone of your exhaust is dependant on the type of rear muffler your using. -------------------- |
May 8, 2008 - 8:42 PM |
|
Moderator Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) |
isn't usually better to have a stright pipe rather than to have heaps of bends?
-------------------- |
May 8, 2008 - 9:06 PM |
|
Enthusiast Joined Feb 28, '07 Currently Offline Reputation: 1 (100%) |
it is better for a turbo^^^^
-------------------- BANNED. for life, you moron.
|
May 15, 2008 - 5:35 PM |
|
Enthusiast Joined Nov 5, '07 From westminster md Currently Offline Reputation: 0 (0%) |
netrata, awesome post! Where did you buy parts?
|
May 15, 2008 - 6:31 PM |
|
Enthusiast Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) |
The magnaflow resonator and high flow cat. converter I bought from summitracing.com and the megan racing n1 muffler I bought from ebay lol. But soon it will change with a blitz nur muffler.
-------------------- |
May 15, 2008 - 9:24 PM |
|
Moderator Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) |
how much power did you gain?
-------------------- |
May 16, 2008 - 8:49 AM |
|
Enthusiast Joined Dec 20, '07 From Valkeakoski, Finland Currently Offline Reputation: 0 (0%) |
to assdyno +10?
Really more like +2? -------------------- |
May 17, 2008 - 4:56 PM |
|
Enthusiast Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) |
Honestly i'm not sure because there is no dyno here on Maui. But all I can see that torque and high end power improved from what I can notice.
-------------------- |
May 17, 2008 - 9:51 PM |
|
Enthusiast Joined Apr 15, '08 From Powder Springs GA Currently Offline Reputation: 0 (0%) |
Thanks for all of the replies. I think now I should go with a 2.5 setup not 2.25. I also think it should be under the rear axel. Does anyone have advice about where to start the 2.5 pipes? after the flex pipe maybe? Also what differences would there be without a resonator.
|
May 20, 2008 - 2:52 AM |
|
Enthusiast Joined Mar 29, '08 From chicago Currently Offline Reputation: 0 (0%) |
Here's my 2.25 exhaust setup. This is an under-axle catback consisting of a magnaflow high flow cat. converter, 20" 2.25" inlet/outlet magnaflow resonator, and a 2.5" megan racing n1 muffer. This was put together by a local exhaust shop. And a Video Clip: http://www.youtube.com/watch?v=1kHzpSc3D1Y Here is what I used: Magnaflow Cat. Converter Magnaflow resonator/muffler Megan Racing N1 muffler BTW, the overall tone of your exhaust is dependant on the type of rear muffler your using. whats that the pic of the three one??? is it a resonator??? also what does it do??? whats that the pic of the three one??? is it a resonator??? also what does it do??? |
May 20, 2008 - 8:37 AM |
|
Enthusiast Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) |
3rd pix is a rear muffler. What this part of the exhaust does is it sets the overall tone of the exhaust system. What a resonator does is simply muffle the exhaust tone so it's quieter.
-------------------- |
May 20, 2008 - 11:32 AM |
|
Enthusiast Joined Dec 20, '07 From Valkeakoski, Finland Currently Offline Reputation: 0 (0%) |
Thanks for all of the replies. I think now I should go with a 2.5 setup not 2.25. I also think it should be under the rear axel. Does anyone have advice about where to start the 2.5 pipes? after the flex pipe maybe? Also what differences would there be without a resonator. Im gettin' a 2,5" over the axel going exhaust, from cat to rear. -------------------- |
May 20, 2008 - 10:05 PM |
|
Enthusiast Joined Nov 6, '07 From seattle Currently Offline Reputation: 4 (100%) |
Here's my 2.25 exhaust setup. This is an under-axle catback consisting of a magnaflow high flow cat. converter, 20" 2.25" inlet/outlet magnaflow resonator, and a 2.5" megan racing n1 muffer. This was put together by a local exhaust shop. And a Video Clip: http://www.youtube.com/watch?v=1kHzpSc3D1Y Here is what I used: Magnaflow Cat. Converter BTW, the overall tone of your exhaust is dependant on the type of rear muffler your using. How much does that setup usually cost including exhaust installation and parts? This post has been edited by bizzerk: May 20, 2008 - 10:12 PM -------------------- |
May 21, 2008 - 7:28 PM |
|
Enthusiast Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) |
Parts and installation on the car cost roughly $340. Shipping for the parts to me was around $60 because of the weight of the parts and the distance from the mainland U.S. to Hawaii.
This post has been edited by netrata: May 21, 2008 - 7:29 PM -------------------- |
May 24, 2008 - 3:12 AM |
|
Enthusiast Joined Nov 4, '06 From POLAND Currently Offline Reputation: 0 (0%) |
In my st202 I have BEAMS Red-Top swaped .....
Going to upgrade my exhaust .... Now I have beams-header and Y-pipe finished 60MM after that from catalic-converter all parts are stock ..... I bought SARD Sports Catalyzer from Altezza 3s-ge beams (IN-60MM, OUT-60MM) with resonator ..... Looking for RS-R 60mm muffler ..... This post has been edited by pasqual: May 25, 2008 - 2:12 AM -------------------- BEAMS swaped .......
|
May 26, 2008 - 10:55 PM |
|
Enthusiast Joined Aug 13, '07 From Arizona Currently Offline Reputation: 1 (100%) |
http://spideraccessories.stores.yahoo.net/mumaststtip.html im thinking about getting this exhaust think its a good idea??
|
May 28, 2008 - 5:12 PM |
|
Enthusiast Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) |
I honestly would say yes. That is actually the muffler I originally wanted but then decided to stick with N1 style mufflers instead.
-------------------- |
Lo-Fi Version | Time is now: November 24th, 2024 - 8:06 AM |