6G Celicas Forums

ok so some of you know ive been haveing some trouble with my bodykits, so its put an extension on my paintjob. the front should be here next week. anyway, i was taking out my trim the other day to get ready for paint and i came up with the idea of getting rid of my cubby hole and light since it doesnt even work. I also decided to put a celica sticker in place of it. Its not done yet but i figured id show u what i have so far.

This is the piece



heres what will be going in place of the holes.




And here is a bigger version that i put on my wall





lemme know what u think


~Brent

whatever works for you

also, what kit did you finally decide on?

This post has been edited by D-Man: May 13, 2008 - 4:49 PM

c-one replica, vader sides, curren rears

i will prolly relocate mi lighter. but that looks good, have you tought of adding a couple of swithces there.

hmm I was thinking about getting rid of that whole setup there too but what do you use to cover it up? just autobody filler?

yea i lasered a peice of plastic out that was the size of the whole, then clamped it in and bondoed it. then sanded the crap out of it haha


did it in a bout a day in a half

Hard to beat this setup:

do they actually work!!
i have never seen a celica with those buttons

Hard to beat indeed... very nice. Now you just need something cool to control using that middle slot...

oh man i wish i had a pic of mine...

US VERT GUYS HAVE 3 SWITCHES THERE ahahahahahahahahha~

So what if i have to crank my own knob.... (woah, that really didnt sound right) I'm reffering to the hight adjustment on the seat

I can drop my top & quarter window's & i get a sure sound spiffy looking set of 3 switches out of it

This post has been edited by D-Man: May 14, 2008 - 4:23 PM

D-man i dont think i have ever read one of your threads with out laughing for at lest 2-3 mins!

Yep, they work! These buttons are very rare, that's why you have not seen them.



I will probably be hooking up my ipod connection there. We'll see.

-------

Okay guys, back on topic.

-------

Not a big fan of the white, but looks like you did a good job.

this is what i did to mount the boost controller and the led knock monitoring system

found some plastic binder holders which texture on the plastic matched that of the trim perfectly






This post has been edited by urbandork: May 14, 2008 - 7:24 PM

mmmm i wonder what it would take to use the avalons heating and cooling system for the seats???? i know we can get the parts, just need to wire em up? wait im gunna make a topis about this
sorry for off topic....
but good job and that looks tight!

Take pix if you do put your ipod connection there, I'd like to see how that works out; that would be a good spot for it. Is your lighter still there? Hard to tell in the pix but it looks like it is.

I try my best


Seeing as mine is all used up, i'm going to use that space under the head unit din for my controllers. Plus i hope to shave the damn vents there too...

i hate those vents...

But your stuff DEFF looks clean!!

This post has been edited by D-Man: May 15, 2008 - 11:27 AM

I need the peice that hooks up to the vents [behind them] if you do shave those. Someone destroyed them previously for whatever reason.

okay.

In return I'll make you a custom fit block off plate so you won't lose any air pressure to the other vents etc.

This post has been edited by DEATH: May 15, 2008 - 2:31 PM

This deal keeps getting better by the minitue. First i dont have to even throw away the trash, now I'm being offered custom made parts, what's next? Will you throw in a free stereo upgrade while your at it?