6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Modding, Can i have your advice?
post May 17, 2008 - 4:14 PM
+Quote Post
PReynolds2006



Enthusiast

Joined May 12, '08
From Newcastle Upon Tyne, UK
Currently Offline

Reputation: 0 (0%)




Hi
Does anyone have any advice on doing minor mods externally cause i'm working with a very tight budget.

thanks PReynolds2006

This post has been edited by PReynolds2006: May 18, 2008 - 6:42 AM
post May 17, 2008 - 4:26 PM
+Quote Post
BloodyStupidDave...



Enthusiast
***
Joined Nov 14, '06
From Northampton, UK
Currently Offline

Reputation: 5 (100%)




QUOTE (PReynolds2006 @ May 17, 2008 - 10:14 PM) *
Does anyone have any advice on doing minor mods externally cause i'm working with a very tight budget.


* Change your windscreen washers for arc jet washers (such as Volvos have)
* Swap your yellow repeaters for clear ones with chromed yellow bulbs
* Look for a 6th gen or 5th gen bonnet spoiler at your local junk yard
* Horn upgrade, sports pedals, interior mats are all fairly cheap to do
* Look to replace your gear gaiter and gear knob if they are looking a little tired and worn

For a little more money:
* get a complete car detailing kit and give your car a damn good detailing (wash and wax).
* cold air intake or performance air filter

For a little more money again:
* replica front and rear splitters
* look out for a pair of second-hand skirts in good condition if you car doesn't have skirts fitted. Probably best to stick with original Toyota - there are at least 3 different styles to choose between.
* 5th gen mirrors give the car a more sporty look but does need basic metalwork and electrics skills


--------------------
post May 17, 2008 - 4:54 PM
+Quote Post
azian_advanced



Enthusiast
*****
Joined Apr 18, '05
From Calgary
Currently Offline

Reputation: 20 (100%)




^ and a really good starting mod is to get lowering springs.. labor will be a b**** though if you're not doing it yourself

This post has been edited by azian_advanced: May 17, 2008 - 4:56 PM


--------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
post May 17, 2008 - 8:58 PM
+Quote Post
njccmd2002



Enthusiast
*****
Joined Mar 15, '07
From Tennessee
Currently Offline

Reputation: 52 (100%)




QUOTE (BloodyStupidDavey @ May 17, 2008 - 5:26 PM) *
QUOTE (PReynolds2006 @ May 17, 2008 - 10:14 PM) *
Does anyone have any advice on doing minor mods externally cause i'm working with a very tight budget.


* Change your windscreen washers for arc jet washers (such as Volvos have)


^^^

never heard of that, what does it do?


--------------------
Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL

If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in

2grfe Swapped... Why I chose the 2GR, before you ask read here...

A great civilization is not conquered from without until it has destroyed itself from within.


@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
post May 18, 2008 - 3:42 AM
+Quote Post
BloodyStupidDave...



Enthusiast
***
Joined Nov 14, '06
From Northampton, UK
Currently Offline

Reputation: 5 (100%)




QUOTE (njccmd2002 @ May 18, 2008 - 2:58 AM) *
* Change your windscreen washers for arc jet washers (such as Volvos have)

QUOTE
never heard of that, what does it do?


Volov part #30655606. The Volvo part number is known to fit the holes in our bonnets. All it does is mix air with the water and spray a wide-angle band of water onto the screen rather than two focussed jets.

Link to how-to (Celica Club UK).

The Mercedes Sprinter vans have a different wide-angle spray pattern again. It is currently unknown whether they fit or not. It may be that Toyota/Lexus themselves do a wide-angle jet that will fit our bonnets better (the volvo part fits securely but only just covers the hole).

For an OEM option, you might want to try the Auris arc washer jets. They are fixed angle and available in three angles:

85381-12330 0 Degree angle

85381-12340 -2 Degree angle

85381-12350 +2 Degree angle

85381-12350 hits furthest up the windscreen on the Auris. Bear in mind that Auris windscreens are a different size and angle than Celica.

This post has been edited by BloodyStupidDavey: Nov 21, 2008 - 11:18 PM


--------------------
post May 18, 2008 - 5:21 AM
+Quote Post
808celica



Enthusiast
*****
Joined Feb 24, '07
From Oahu, Hawaii
Currently Offline

Reputation: 23 (100%)




i cant think of any cheap exterior mods to do tongue.gif but i know some inexpensive interior mods. get a can of spray paint of your fav color and spray some interior peices to accent the car a little. of course you'll have to take the peice out to spray biggrin.gif. ummm tint you can do a light tint. oh and a nice "shocker" sticker on the rear bumper is one of the best cheap exterior mods i "did". no longer on the car though due to a full car respray.


--------------------
I don't normally drive fast, but when I do its on a curvy section of this island
post May 18, 2008 - 5:35 AM
+Quote Post
PReynolds2006



Enthusiast

Joined May 12, '08
From Newcastle Upon Tyne, UK
Currently Offline

Reputation: 0 (0%)




QUOTE (808celica @ May 18, 2008 - 6:21 AM) *
i cant think of any cheap exterior mods to do tongue.gif but i know some inexpensive interior mods. get a can of spray paint of your fav color and spray some interior peices to accent the car a little. of course you'll have to take the peice out to spray biggrin.gif. ummm tint you can do a light tint. oh and a nice "shocker" sticker on the rear bumper is one of the best cheap exterior mods i "did". no longer on the car though due to a full car respray.


do u know if there are any tutorials of spraying parts internal or external?

Thanks PReynolds2006

Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 8:03 PM