Sunroof Problems |
Sunroof Problems |
Jun 23, 2008 - 10:31 PM |
|
Enthusiast Joined Jun 21, '08 From Naples, FL Currently Offline Reputation: 0 (0%) |
So, I've had the car for about two months. Everything worked fine up until a month ago; the sunroof suddenly stopped working properly. It opens fine, but when I try to close it again, it stops halfway almost as if it rubs against something. I've checked and there's nothing touching. After a minute or two, it'll go again and I can close it.
I've ruled out the fact that the glass/plastic housing stretches since I've tried in the mornings when the car was cool too. So I've been told it's the motor. First, what do you guys think the problem is, and second, how much would the motor cost too replace? |
Jun 24, 2008 - 7:30 AM |
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
You do know it auto stops at the halfway point from the factory right? Then you have to release the button and press it again to get it to fully close. Not sure but I think maybe it's so you don't close someone or something in the roof?
-------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Jun 24, 2008 - 2:53 PM |
|
Enthusiast Joined Jan 10, '04 From Shoreline, WA Currently Offline Reputation: 4 (100%) |
^ sounds like the auto stop to me.... I think its just a mid setting if you want it 1/2 open or something rather then a safety feature but who knows.
-------------------- |
Jun 24, 2008 - 2:58 PM |
|
Enthusiast Joined Feb 10, '06 From Knoxville, TN Currently Offline Reputation: 8 (100%) |
You do know it auto stops at the halfway point from the factory right? Then you have to release the button and press it again to get it to fully close. Not sure but I think maybe it's so you don't close someone or something in the roof? X2 on this! That is what I was told. I think my mom's old Camry did the same thing. -------------------- |
Jun 24, 2008 - 9:16 PM |
|
Enthusiast Joined Jun 21, '08 From Naples, FL Currently Offline Reputation: 0 (0%) |
I don't think so, at least it didn't do this at the beginning. Maybe a misunderstanding? I mean that it goes forward (closed) again only halfway, not that when it's fully open and tilted over, that it only goes down (closed) halfway.
If that is the case, however, that would be good. However, it still doesn't wanna go after I let go and press again. Only after a minute does it budge again. |
Jun 25, 2008 - 12:04 PM |
|
Enthusiast Joined Feb 10, '06 From Knoxville, TN Currently Offline Reputation: 8 (100%) |
I don't think so, at least it didn't do this at the beginning. Maybe a misunderstanding? I mean that it goes forward (closed) again only halfway, not that when it's fully open and tilted over, that it only goes down (closed) halfway. If that is the case, however, that would be good. However, it still doesn't wanna go after I let go and press again. Only after a minute does it budge again. Could it be a short in a wire? Is the problem consistant? -------------------- |
Jun 25, 2008 - 12:08 PM |
|
Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
It sounds like maybe there's a bearing going out in the motor, or something needs lubed
-------------------- |
Jun 25, 2008 - 11:24 PM |
|
Enthusiast Joined Jun 21, '08 From Naples, FL Currently Offline Reputation: 0 (0%) |
[Could it be a short in a wire? Is the problem consistant? Don't know, you guys are the experts...problem is consistent. Thing is, it'll just not work for a minute...after that, it's fine and can close again. It sounds like maybe there's a bearing going out in the motor, or something needs lubed Lubing does sound reasonable, since it seems like it's straining. |
Jun 26, 2008 - 8:26 AM |
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Sounds like something is wrong with the auto stop feature. I've owned 3 6GCs and two Camry's that all had this feature. When it goes back it goes all the way till it's fully open. When you close it it stops halfway then you have to release it and press it again to get it to close all the way. Sounds like what yours is doing but yours won't go the last half until a few moments later right?
-------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Jun 26, 2008 - 11:09 AM |
|
Enthusiast Joined Jun 21, '08 From Naples, FL Currently Offline Reputation: 0 (0%) |
Sounds like something is wrong with the auto stop feature. I've owned 3 6GCs and two Camry's that all had this feature. When it goes back it goes all the way till it's fully open. When you close it it stops halfway then you have to release it and press it again to get it to close all the way. Sounds like what yours is doing but yours won't go the last half until a few moments later right? Exactly, I have to wait about a minute before it'll fully close. Thing is, it never even stopped halfway before I encountered problems, just always closed right away. |
Jun 27, 2008 - 12:31 PM |
|
Enthusiast Joined Jan 10, '04 From Shoreline, WA Currently Offline Reputation: 4 (100%) |
maybe someone modded it to close all the way without the stop and now there mod is failing. have you pulled down the celing pad and poked around, anything look non stock, extra wires ect.
-------------------- |
Jun 27, 2008 - 8:22 PM |
|
Enthusiast Joined Jun 21, '08 From Naples, FL Currently Offline Reputation: 0 (0%) |
I haven't, no.
Just as an update, I messed with it today and just put it on tilt, so barely even stressed the motor. Exact same thing. It'll go up, but not back down, and after a minute it's fine and movable again. |
Jun 28, 2008 - 6:02 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I agree on the halfway point, for me I have to press the switch again to make it close all the way.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Jun 29, 2008 - 1:39 AM |
|
Enthusiast Joined Oct 5, '03 From South TX. Currently Offline Reputation: 14 (100%) |
sounds to me like somethings going on with the switch........if the open never fails and the close does.....
reminds me of the rear quarter window switches in the convertibles.....doesn't hurt to test the switch.... |
Jun 29, 2008 - 11:54 AM |
|
Enthusiast Joined Jun 21, '08 From Naples, FL Currently Offline Reputation: 0 (0%) |
Hmm, so I just have to rip open that console thing and see? And how do I go about doing that?
|
Lo-Fi Version | Time is now: November 23rd, 2024 - 11:08 AM |