6G Celicas Forums

if you look at the pictures of my car in my profile, the front of the side skirts are kinda low....do you think i could drop it some? like maybe 1" or 1.5"? i just really dont want to tear off my side skirts or my front bumper...but if you look at the car, you can tell it needs to be lowered

Yes.

Once you've lowered it, that's gonna be a beast!

very nice looking car yes you can drop spax 40mm or maybe tiens 30 to 35mm

Tanabe GF210's are your answer if you want something stiff, but around 1" of lowering.

http://hopupracing.com/tasusudopsp4.html

i got the same skirts and i wanna go lower

dont measure with your hand (it will always be inaccurate) when a spring has a drop between 35mm & 45mm the 1st is when you put the spring in, the later is the maxium drop after the springs settle in


i have super lows in

We run way lower than that where I'm from, mine is pretty much a two inch drop but I'm thinking three now. It all depends on your streets and the places you got dat you can clear.

the only problem is....if u look closely, you can see that the side skirts arent as high as they should be....this is because when the guy was putting them on...he said there was a gap if he put them up all the way...so he had to move them down a little...so there is only 5 inches between the bottom of my side skirt and the ground....so tell me what you think

i say u go 1.5 inches..

will i even be able to make it over a speed bump like that? only 3.5 inches from the ground at the most?

IMO it would look better if you lowered it, even if you have to take the skirts off!

yea a lowered celi is the best celi yes u would have a prob,depending on the bump..

This post has been edited by CelicaST_CALI: Jul 2, 2008 - 5:02 PM

perhaps i could get some eibach pro-kits instead of sportlines to just drop it 1" instead of 1.5". and if i do that, i think i will get some kyb struts....when i get paid that is

angle it over the speed bumbs

if under your bumper or lip isn't scratched up you aint low enough

This post has been edited by 808celica: Jul 4, 2008 - 2:44 AM

if your roads dont suck, go ahead and lower it, I have a very similar kit but the roads here in south florida SUCK, so I would constantly be scraping the bottom