6G Celicas Forums

well i was looking intop getting the WtA intercooler setup from a st205 or st185 rc, but i can only just find the intercooler. What els do i need to make it work on my 3sgte swapped celica?

This post has been edited by 02bluerolla: Aug 23, 2008 - 11:31 AM

Chargecooler
radiator
pump
pipework
something to turn the pump on and off....either the ECU or a switch system

am guessing thats the intercooler lol .

well can i use a st165 pump? i found one for 50$.... also is there a way i can buy the radiotor and lines from toyota?

Yeah but you still need the radiator, pump and all that other stuff he was talking about. It's actually quite a bit of stuff to install.
BTW - I got parts for you in my garage, come by - bring $$$


Not likely unless you can find a place that will order stuff they don't normally get here in the states. Do you have AC? I don't see why you couldn't convert your AC heat exchanger to a heat exchanger for the W2A - maybe someone else will know why not or confirm that would work [It looks to be very similar tho]

I basically paid less than 200 dollars for my wt2 set-up. I bought trailor riggin parts. It runs like a charm. btw is it bad to have the pump run all the time? I just now added a switch, but is it bad to keep it running?

what do you mean by that lol? i really want to get a wta setup but iam just stumped cause i cant find the part ....

All the time as in ALL the time? or all the time as in all the time the car is running?

lol yeah i still want the adapter plate for my intake and other stuff

Trailor riggin. The pump I used a bait well pump, which has held up good so far. Coolant lines I bought from napa. I made a switch to turn the pump on and off, But I run it all te time while the car is running. Sorry for not being clear. For the heat exchanger, since I'm not using ac or my swap, I opted to use the ac condensor. It works good with zero leaks.

hmmmm do you have any pics of how you routed the coolant lines? a m thinking of doing this insstead

I'll take pics of them right now and will upload it. h/o

thanks dude

uploading right now. Now keep in mind non of this is pretty. I'll tell you one thing though. It WORKS. Sorry for the mess because I am dropping in LSD e153 tranny at the moment. Just waiting on the fed ex guy with my clutch disk.

lol NICE how much did you pay for the tranny if you dont mind me asking

400 shipped came with axles too.

okay keep in mind this is a 3rd gen w2a on a 2nd gen swap with the factory ct26 turbo.

Pics don't work?

Does anyone know what the part number is for te toyota sticker on top of the w2a ic?

Jut posted them. I had my gf do the uploading while i was outside putting in the 3s clutch disc i just finally got.

thanks dude this really helped me out

ok i found just the intercooler for sale but he wants 350 already shipped ...is this a good deal? how much do this usually go for?