6G Celicas Forums

yup you can use that its not only efficient it will cool quicker , and short shift thts they way u should go with

theyre in the final stages of mocking up the manifold to send it to the tig welder. (for the wastegate) It needs a few more adjustments. Because this is a 4th gen engine, they had to have a flange made b/c we could not find anyone who made a flange to build off of. So far all the parts are stainless and the flanges are all waterjetted.













i cant wait to take her out and rip the asphalt apart!

GIVE ME




looks great, are you using a previous gen manifold off ebay? and then mated it to the new flange?

nah its a custom manifold since the previous gens would not match.

where are the radiator fans?

they took them out for now, they were just mocking everythign up to see how they would fit. that turbo looks a little close to the radiator from one angle, but should be ok enough for the fans to squeeze in

This post has been edited by easternpiro1: Sep 3, 2008 - 9:05 PM

sweet man! hey im interested in this GT rad. u speak of...?? PM me or AIM if you got it, my sn is in my profile.

update time.... the ninja is up...its running, and almost ready..... just had a few exhaust leaks from the flange and a few other spots (custom flanges will be sanded)

PICS COMING SOON!!!!

found a pic of the dp

sweet man! how was the final fitment of the turbo with the fans?

AH! DAN YOU WANT MOAR?!? YOU GOT IT!












(downpipe wrapped and coated)

why is the wastegate only tapped into 1 runner?
tweek, are you concerned about boost creep with that setup??
the old turbonetics manifold (and cheapo ebay copies) had it setup like that, with the wastegate off one runner, and everyone who ran it had terrible boost creep issues.
also, why over the axle with 3"? dont it kinda negate the benifit of having 3" having to route it like that?

make sure the hood closes without touching the IC piping. everything " looks " nice and shinny when do you think you'll be enjoying all the power again ?

This post has been edited by Culpable04: Sep 24, 2008 - 1:56 PM

good point! but i have an aftermarket hood (vis vented c/f) , and it seems to have a bit higher clearance.

i should be enjoying the power this weekend hopefully! i cant get it dyno tuned there (dynojet not in yet and another shop is booked) so they will street tune it and i will come back to dyno it.

see the fans ferris? didnt have them in at first to make fitment adjustments.

i sure hope that CAT is gutted nc dosent inspect emissions on cars before 96


This post has been edited by easternpiro1: Sep 24, 2008 - 2:15 PM

those are two of my noticed concerns as well.
Over axle will not make any really noticeable difference )1-2hp maybe?!) but eh.
the wastegate is a larger issue that should be addressed though.


Matt all else said it looks great

That's a nice highflow cat - leave it alone. There is no use trying to get .0001 HP and polluting any more than you have to.
Nice setup Matt - I expect you to run in the mid 13's now

from what i understand, there was also fitment issues with the manifold and w/g placement, but i am wondering about boost creep




thanx dan! btw, do you have a link to that turbonetics manifold? i couldnt find it....




youre right matt, but if i tune the nos timing i'll run 9's! lol POLLUITION?!? im a carolinian now!! they dont care about pollution in these parts of the south! lol

If you are picking it up at SCC, look for my car and tell me the progress.

The car looks great.

if thats a twin entry turbo and a twin ennty manifold 2 cyclinders wont be able to purge gas out the wastegate = boost creep. and yeah your gunan have a boost creep issue. sorry man.

Hey guys,

As most of you know I do almost only wiring now, I oversee swaps at SCC that are being done on my customer's cars when they need help. My comments on the build:

1. The over-axle was my choice and is by far the best way to do it. It's the way it's ran factory, with mandrel-bent piping the extra couple bends aren't going to hurt the flow and it comes out very clean. The whole "under axle is better" notion comes from lazy/unskilled fabricators who have told their customers that going under the axle is "better", simply because they were either unable or unwilling to do it the right way.

2. Having the wastegate going into one runner was a solution to a logistical problem faced by the guys at SCC who did the build. It wouldn't have been my first choice but seeing the small amount of space they had to work with I can see why they did it that way. The manifold is a SINGLE-entry going to a single-entry turbo, so technically all four runners are in the same chamber, and the pressure in that chamber should be able to vent through the wastegate without causing boost creep. I guess we'll know for sure once it's on the road

3. The intercooler piping easily clears the hood, it's taking the same route that it did when I personally did the swap the first time last year, except that now it's welded

-Doc

This post has been edited by Dr_Tweak: Sep 26, 2008 - 12:46 PM