6G Celicas Forums

I was hanging on to these to have completely redone in a custom color down the road, but grenading my TT Vette motor during some spirited driving left me hurting on cash so it's time to let these go. They're HP Design Wheel HPR-5's with a gunmetal finish.

Here's a pic of what they look like:



THe good: Two of the wheels are in really good shape.
The Bad: Two of the wheels are not so good, one of which is bent and will without a question need a professional repair. The other had a small section of curb rash and fell on it's face scuffing the clear coat. This should be able to be hand polished and cleaned up.

Currently two of the wheels have VERY new 215/35-18 General Exclaim UHP tires on them. One has a trashed UHP and one has a 225/40-18 Kuhmo on it (testing purposes). I do have a second Kuhmo tire, and though they're used they still have some life. Will include this too so either way you go you'll only NEED two tires to match up an entire set.

Pics:
Bent Wheel: This is the outside lip. The inside lip has a much sharper bend. Repair was a flat $140 at a local St. Louis wheel refinisher.


One of the good UHP tires and the other with the kuhmo tire.


Can get more pics upon request. They're in the attic above my garage and I'll pull them down and clean them up and get some more pics.

Looking for $325 shipped (given shipping for 4 wheel/tires +1 additional tire will be about $80, you're actually only paying about $240-250). These are VERY sweet wheels, and NO LONGER in production. Cost us over $850 for the wheels alone brand new in 2006. Have the one fixed and you've got a great looking set of wheels for under $500. Check my feedback and ask around here about me, I'm not a scam artiste' and am very honest.

This post has been edited by Fastbird: Oct 3, 2008 - 12:20 PM

hmmm i really like these, ill get back to you tommorow, im gonna see if a buddy of mine wants my wheels and if he does ill pick these up

oh and if i managed to score the extra cash, could you send the wheel to get repaired for me before they are shipped out??? we dont have wheel repair shops in these parts :S

Yeah, I could do that. It's a local to me shop so I can just drop off and pick up. They just have to straighten and refinish.

niiiice well ill let you know tommorow when i get out of the hospital at 5 lol, i've had to throw away wheel sets because there are no wheel refinishers within a 200 mile radius lol, thanks for the trouble

No trouble at all. If you're buying them, I'll do everything I can to make sure that you're set up. Just my way of saying "thanks".

and sean is a badass guy, so he will take care of you
these wheels are so sexy

Thanks man!

Bumppity......would like to see these gone sooner rather than later. Got $8K to drop on a new motor.

do the bent wheels hold air?

Yes. I drove 40 miles to work on it after hitting the pothole. Holding on for dear lift because it jacked both the wheel balance and my alignment something fierce, but it held and still has air in it 1.5 years later.

if you still hve them by next week, i may buy from you, depending how my check comes out.

Sounds good. I'm not expecting them to go anywhere that fast.

Bump for a new day.

You have pm

Wheels are tentatively sold to bseaman_5 pending payment on Friday.

SOLD! Thanks bseaman_5!!!!!