6G Celicas Forums

I want to get new rear sway bar bushings to get rid of any noise the old ones might be making, and I say that Energy Suspension makes universal bushings based on the size of the bar. I measured the rear sway bar with a dial caliper and it's 16mm.

http://www.energysuspensionparts.com/Unive...ar-Bushings.asp

I believe we have non-greaseable bushings, so it should be these:

http://www.energysuspensionparts.com/prodd...asp?prod=9.5120

If someone could confirm dimensions of the brackets that would be awesome. This would be a nice and cheap little upgrade. I would do my fronts as well if someone knew the size of it so I can confirm which set to buy (they have an A and a B).

This post has been edited by GotToyota: Oct 23, 2008 - 9:14 PM

I thought it was determined that the OEM Toyota bushings were inexpensive and just as good?

When was this said?

At $16 for a pair of bushings it's certainly worth a shot. I would just like dimensions of the front and rear bushing brackets.

-Matt

Maybe it's just my computer, but the links aren't working for me.

What kind of measurements on the brackets do you need? I just replaced my sway bars today so I have the factory bushings and brackets sitting around to get measurements from.

I fixed the links.

Look at the first link under non-greaseable bushings, I just need those bracket measurements compared to the factory ones.

-Matt

This post has been edited by GotToyota: Oct 23, 2008 - 9:13 PM

Anyone?