how to mod a 2.2L 96 celica? |
how to mod a 2.2L 96 celica? |
Jan 31, 2009 - 8:57 PM |
|
Enthusiast Joined Jan 31, '09 From Richmond Currently Offline Reputation: 0 (0%) |
Hey everyone im new here.
im looking for suggestons on how to mod a 2.2L celica. from a 130hp to 200-240hp. any suggestions? everything is stock and i would like to keep that car as N/A not turbo. and if it were to go to 200 - 240hp what other changes should be made to the car to have a great perfomance. Thanks |
Jan 31, 2009 - 9:02 PM |
|
Enthusiast Joined May 22, '08 From dallas texas Currently Offline Reputation: 11 (100%) |
well i guess i'll be the first to tell you off for not looking at stickies and other threads, read around a bit, its dam near impossible to get 5s to run 200hp (to the ground) and still be NA. turbo is very possible. read the progress threads of presure2 among others that will give you plenty of info about the 5s
|
Jan 31, 2009 - 9:10 PM |
|
Enthusiast Joined Jan 31, '09 From Richmond Currently Offline Reputation: 0 (0%) |
oh...thank you. im new at this didnt know there were other threads similar to mine.
|
Jan 31, 2009 - 9:35 PM |
|
Enthusiast Joined Sep 22, '08 From Bergenfield Currently Offline Reputation: 5 (78%) |
welcome to the site You will have a very hard time modding the 5sfe 2.2L to make 200hp. But there are a few mods you can do. Such as Header, exhaust, intake, cams, and tuning. The install of cams will REALLY change the way car feels/pulls. Unfortunately there is really no performance for the 5sfe out there, so the only real option to make above 200hp is to turbo. There is a lot of information out there for turboing the 5sfe, just look up the names Presure2 or Supershannon77. There is plenty of reading to be had there.
You can also look up the 3sgte swap. Its a factory turbo motor swap that is commonly done in these cars. This is another great option for our cars. well i guess i'll be the first to tell you off for not looking at stickies and other threads, read around a bit, its dam near impossible to get 5s to run 200hp (to the ground) and still be NA. turbo is very possible. read the progress threads of presure2 among others that will give you plenty of info about the 5s Dude, WTF.....that is not necessary, he just joined today. His post was no better no worse than yours This post has been edited by _Jim_: Jan 31, 2009 - 9:37 PM --------------------
|
Jan 31, 2009 - 9:45 PM |
|
Enthusiast Joined May 22, '08 From dallas texas Currently Offline Reputation: 11 (100%) |
so its ok for the mods to say that but not other people, all i said was look around, since half the people who join instantly make one of these threads, its easier for them to read than to have us bring all the links to them, plus they learn alot more (at least i did) and i said its dam near impossible to get it 200 hp keeping it NA
"You will have a very hard time modding the 5sfe 2.2L to make 200hp" soooo i dunno what i said that was much different, ill say, i'd suggest looking at the stickies and alot of threads like pressures, blah blah blah if that sounds better either way its saying the same thing i have nothing against the guy, i was more abrupt than you i figured he'd get through the night This post has been edited by 97celiman: Jan 31, 2009 - 9:47 PM |
Jan 31, 2009 - 9:51 PM |
|
Enthusiast Joined Apr 6, '08 From Overland Park Currently Offline Reputation: 9 (100%) |
As Jim here has said, boosting your engine will be the only way to get 200+hp there are quite a few people on here that know a wealth of info about it. there is also a bunch of info in the stickies, idk if you found em already but
http://www.6gc.net/forums/index.php?showtopic=5574 there is the sticky for the 5sfe turbo section.. There is a lot of reading ahead for you if you are interested in it.. there is tons of info all over the place too.. welcome to the site! -------------------- |
Jan 31, 2009 - 11:07 PM |
|
Enthusiast Joined Apr 23, '06 From Rochester, NY Currently Offline Reputation: 8 (100%) |
just shows some people can really be dicks on here. if you see that a "new guy" is asking a commonly posted question, and you just feel like "telling them off". instead just dont post any advice whatsoever. It's a forum, people are coming here for help. not to ask for help and get screwed with.
Erich |
Jan 31, 2009 - 11:12 PM |
|
Enthusiast Joined Jan 30, '09 From Anchorage, Alaska Currently Offline Reputation: 0 (0%) |
If you want parts email me and I can get you price quotes. mouse@phoenixtuning.com
|
Jan 31, 2009 - 11:18 PM |
|
Enthusiast Joined Dec 7, '07 From Corpus Christi, TX Currently Offline Reputation: 7 (100%) |
Parden the rudeness rsatype23. Everybody pretty much hit it on the head dude. Use the stickies but at the same time ask questions. Thats wut this site is here for man. Jim stated some good items to increase ur power. Also to increaseing ur ignition is just as helpful. Just replace ur stock ground wire with a thicker gauge. Most people look past that opition. It really does help believe it or not. If ur just trying to to be faster u can also lighten ur ride by removeing alot of useless Item. But thats ur peragitive. Good luck with the build man.
-------------------- From Japan to Texas my st202 follows me.
Being different from every angle of the word, leading the Revolution (TOYOTA NATION) The RHD st202 that made it from Japan check it out. http://www.6gc.net/forums/index.php?showtopic=78103 |
Jan 31, 2009 - 11:25 PM |
|
Enthusiast Joined Jan 17, '08 From JB MDL, NJ Currently Offline Reputation: 30 (100%) |
Wow, I wasn't going to put anything on here cause I thought the reply made by 97celi really wasnt that bad. Im sure that we've all seen worse on this site than what he put down. I know the guy and he isnt a dick, I just think that maybe there is too much reading into this (its not like he personally attacked him). Maybe he didnt really use "forum etiquette", but hey, you cant look at things and take it at face value. I think that if anyone has a problem with how it was written, it should be rstype23.
|
Feb 1, 2009 - 12:54 AM |
|
Enthusiast Joined Jan 31, '09 From Richmond Currently Offline Reputation: 0 (0%) |
im cool with the suggestions. i did do some reading on this forum but i couldn't really find what i was looking for. but thanks for pointing me in the right direction.
i dont really mind turbo the car but i heard that turbo wears the engine and it's quite expensive. i dont need like a crazy amount of horsepower just enough ideally i was looking at 265hp. if i had to go with a turbo i think my budget would be 3000. i did think about swapping and putting in a gt4 engine but i heard that's even more expensive and maybe not worth it. |
Feb 1, 2009 - 1:28 AM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Hmm... You want your GT to be around 240 hp... Considering you never specified modding your current motor, I have the perfect solution. 3SGTE SWAP!!!! Since you have a GT, you're already halfway there. And that motor has just the right amount of power for you.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Feb 1, 2009 - 2:29 AM |
|
Enthusiast Joined Jan 31, '09 From Richmond Currently Offline Reputation: 0 (0%) |
would the 3sgte work with a front-wheel drive? and the stock transmission?
lets say the swap is made for the engine, would that be it? dont need to mod anything to suit the motor? and dang...that engine must cost alot >< |
Feb 1, 2009 - 2:52 AM |
|
Enthusiast Joined Jan 22, '09 From Bremen Currently Offline Reputation: 2 (100%) |
With the 3sgte swap, it will bolt up to your transmission and the mounts will work. The main issue though is the wiring. Dr. Tweak will convert the harness for you if you send both harnesses to him. I can't remember right off hand how much it costs to do so, but unless you are a wiring guru, he is your best bet.
|
Feb 1, 2009 - 5:01 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I'm sure everyone or most have been in that same seat the first time - especially me, even till now I ask noob questions hehe. Sometimes it is difficult to find what you need by doing searches because they are not exactly the answer you are looking for sometimes or you can't find it at all. I still think that way until now.
RSTYPE - From what I've learned from manny and jim is that the 5sfe is no beast as an NA car but it indeed has torque especially with clutch and flywheel and boltons. However just like any other car in its class you have to boost it. Like these guys have said if you don't plan to exceed 300, 5sfe turboed is the way to go, and over 300, 3sgte motor swap with a better turbo and upgraded parts. the only true after market parts which is really OEM for the 5s is the 3s motors - very identical. Same as how frankenstein jobs are done with Hondas and Acuras. This post has been edited by trdproven: Feb 1, 2009 - 5:02 AM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Feb 1, 2009 - 1:18 PM |
|
Enthusiast Joined Jan 31, '09 From Richmond Currently Offline Reputation: 0 (0%) |
the thing with turbo is i dont like the lag. but turbo is good for a where i am. *sigh* i guess adding a turbo would cheaper than swapping, right?
i have another question for everyone. by the way. thanks for the suggestions you guys i very much appreciate it. oh yeah my 2 questions. with turbo, can i tweak it to has many hp as i want? and, whats the difference between sport suspension and regular suspension? b/c my suspension is still stock and i need to change it but donno what to get? i guess i'll be modding the celica afterall... instead of getting a new car. hahahaha |
Feb 1, 2009 - 1:44 PM |
|
Enthusiast Joined Sep 22, '08 From Bergenfield Currently Offline Reputation: 5 (78%) |
I am a firm believer in, if you want LESS than 300whp (not to be confused with Flywheel HP, which would actually be around 350) then the 5sfe is the way to go. I like it for the fact it is still STOCK. There is no BS when ordering parts, if you do need to take it to a mechanic, the car is exactly the way it let from the dealership except for the addition of a turbo kit, and it is CONSIDERABLY cheaper than swapping. Be clear, do you want 265hp or 265WHP. They are two very different animals. If it is 265whp I would go with a T3 46trim turbo, that will suit your needs and provide fast spool. The turbo new is 700shipped. If you have cash to burn you can pick up a GT3071 if "lag" is a concern of yours. The GT3071 is a ball Bearing turbo and will spool faster than the 46trim T3 and still provided you with 265whp. The draw back to this turbo is it comes in at 1300$. But like I said, if you have the cash and are concerned about lag, that is the turbo for you.
If you decided to turbo your 5sfe, do a leak down and compression test to make sure your motor is healthy. With the 46trim turbo, the kit will run you about 2000-2500 (price includes everything, 3" exhaust, a new clutch, and all the work done yourself) With the GT3071, the kit will run you about 2500-3000 (price includes everything, 3" exhaust, a new clutch, and all the work done yourself) Now for a swap, well there are many different ways to go about it. I will talk about the GEN3 3SGTE since you are starting from scrath as to me the GEN2 3SGTE is NOT worth it. A motor set will run you about 2400 Clutch will be 500 Timing job and pump 300 3" Downpipe (DP) 100 3" custom Exhaust DP back 400 Boost controller 50 New gaskets, fluids, misc, etc. 500 Total 4000-5000 (5000 being closer if you bought a clip like I did and use the GT4 body parts, if not you can sell them for 1000$ +) --------------------
|
Feb 1, 2009 - 1:52 PM |
|
Enthusiast Joined Jan 31, '09 From Richmond Currently Offline Reputation: 0 (0%) |
whats the difference between whp and hp? hahahaha imma a newb at this stuff.
and the amount given above is it us dollars or cdn dollars? |
Feb 1, 2009 - 2:01 PM |
|
Enthusiast Joined Oct 2, '07 From Manitoba, Canada Currently Offline Reputation: 6 (100%) |
presure2 made this nice turbo kit list for the 5sfe that would achieve 230-280 whp at 11-16 psi:
460cc rx7 injectors (70-100$) 3sgte 2 bar map sensor (~75$) 3sgte manifold (50-75$) 3sgte oil pan (50-75$) + KO racing -10an adapter (?25) crapo ebay t3 adapter (76$ shipped) garrett t3/to4e 46 trim with .63 exhaust housing (600$) custom down pipe +DP flange (100$ + labor) custom 3" exhaust ($???) tial 38mm wastegate with 10psi spring (200) oil filter relocation (with the canton block adapter, transdapt filter relocator, and custom -10an stainless braided lines) (200) and of course the associated oil feed and return lines for the turbo. (?125$) a ebay FMIC + piping, couplers, and clamps (3-400$) and a SAFCII for the noob (100-150used) or emanage ultimate or AEM FIC for more experienced. BOV? Walbro fuel pump Gauges + wires if this is missing anything guys please let me know. |
Feb 1, 2009 - 2:05 PM |
|
Enthusiast Joined Sep 22, '08 From Bergenfield Currently Offline Reputation: 5 (78%) |
whats the difference between whp and hp? hahahaha imma a newb at this stuff. well you stated that your 2.2L 5sfe makes 130hp, which is does but that's Flywheel HP before drive-train loss. Drive-train loss (loss meaning the amount of HP lost from the engine to the wheels) for a manual car is usually around 18% and around 22% for an automatic. So that 130hp is actually 110whp. That is a good question because now you will have a more realistic grasp as to power levels you may desire. and the amount given above is it us dollars or cdn dollars? Yes US currency --------------------
|
Lo-Fi Version | Time is now: November 24th, 2024 - 8:54 AM |