6G Celicas Forums

Hey guys my Gauges stoped working. Only the gas gauage seems to work fine and read fine. The others are just plain dead. I was thinking the fuses are blown or a cable was damage. What do I do to fix this?

if it was a fuse nothing would work...? um you can test it with a multimeter. if you want a new cluster i'll get you one out of a 94 gt coupe. let me know.

idk if it was a fuse or not i still havent check those, what do i need to check to know whats wrong? cables? other stuff?

well start there. there one set of fuses under the driver's side vent. the gauge fuse is a ten amp. there is also a set of fuses in the engine bay, i forget if any of them have to do with the cluster. i would check at the fuse with the multi meter. start there and then begin to eliminate the possibilities. it sounds like it is a problem with the speedometer and tach though. do the lights and turn signal indicates work?

yeah all the turn signals and lights work perfectly, could the computer be failing? i hope not :[ .. i was pulling the sensor that goes in the intake cuz it was stuck but idk if that caused the problem

well it's not your fuse. it's either the gauges don't work one of the wires could be bad, or a computer issue... if you want i will get you a cluster from a local junk yard. i'll go saturday. let me know if you want them.

id still check the fuses, i've seen weirder stuff happen with guages. lol

so if i were to take to get it checked, would i need to take it to an electrical shop or normal mechanic?

This post has been edited by DatDudeDEnd: Apr 1, 2009 - 5:32 PM

you can take it to a mechanic. do you have any friends who know their way around cars?

yeah, and even at a parts store if u buy a pack of fuses it will come with a fuse tester, or just use a test light, those will tell u if u are getting power to both sides of the fuses