6G Celicas Forums

Is this going to be a quick and easy install? I just bought a new passenger side front fender.

Also, anyone know if Toyota sells paint to match my celica? Or is there another way I could get paint to make it match as closely as possible?

i actually jsut replaced my front driver side fender. mostly it was pretty easy but there were some screws that were hard to get to and just a pain in the a$$. but about paint i just painted the jams b4 i put it on with duplicolor that was the closest color i could find. and im gettin the car painted soon so now i got a black fender\
but yeah mostly easy

easy just a lot of stuff to remove beforehand. all the screws the front bumper

I HATE reaching in those 3 screws to the front bumper on each side!

All i do is push the cover aside and reach in even with an open wrench, ive never used an extension.

bumper removal is a walk in the park with a lift of some sort - however, if you are looking to do this in a driveway without taking all the plastics off, may want to take a look at the 3 screws they are talking about, and possibly invest in an extension & joint to make things easier

If i recall, you can take the top 4 bolts and bottom 5 or whatever bolts that hold the bumper on, then three bolts that connect the bumper and fender. then there are about 2 bolts that hold the front of the fender on, 3 easy to reach ones along the hood line, and another 2-3 on the door side

hardest part is finding a close paint color to match - unless your car is black or white