6G Celicas Forums

Hey this might be alot to ask but i am in dire need of this big time, ok i bought a 95 st for 300, i took the front bumper off and fenders and realized that the there was no brackets to hold the headlights in they were being held in with a bolt and zipties. so basically what i am asking is, where the radiator is, the support bar its attach too, i need the front end cut off it sounds like alot of work but it isnt, all ur doing is cutting through the side walls, then down and then over top of the front crash bar thats it, its easy i already did it on another car before. A recipricating saw works best. I am in dire need of this, because i cant even mount my headlights without doing this, and i own an rx7 as well, u should know they are 2 seats lol and i have a 4 year old son, so im a lil screwed at the moment. If u want u can call my cell to discuss it futher and i can take pics to show u what u would need to cut and how if u want. its not hard at all like i said. I live in waynesboro,pa 17268 its about a 4 hour drive to vetstal ny My cell is 717-816-1053 plz get in touch with me about this asap i would really appreciate it. So basically all i need is from the radiator support and down to the crash bar cut off, so through the fender walls straight down, across the crash bar, and thats it i just need that lil section.

-Matt

PM Sent

u still there?

do you have the dash cluster wat condition and how much for it.

do you have the interior light, im talking about the whole assembly. the light on the inside of the roof that has two bulbs. the one where you can switch between door and off. So the lights go on when the doors open. if so how much?

I do, but mine also has the controls to the moon roof as part of the assembly. If you don't have a moon roof, you probably have a different part. Let me know if you need one with the moon roof controls.

PM Sent.

I need the Shifter gauge and that cover slip that goes under it. Still have it?
Thanks

PM sent ...

Those seats still available?

Yes

PM sent ... I'll take 'em

hey i need the switch assy, the headlamp dimmer(with switch for fog lights) and the turn signal( with rear wiper witch)
pm me for price, i can send u a photo of what i need too just pm me
thanks
paul

What color is the carpet? And what shape?

whats the condition of the passenger door panel?

Carpet is black and has two problems: a hole on the drivers side that's completely covered up by the floor mat and some sort of bleach stain on the rear passenger side (covered up mostly by the floor mat). Here are some pics while it was still in the car:
Hole on drivers side:


Bleach stain on rear passenger side:

What the floor mat covers:

I am interested in the following parts as well as others. I will PM you for more questions. Thanks.

Pass Lo Beam - $70 shipped
Pass High Beam - $50 shipped


Both airbags are still good and available.
Let me know if these prices seem unfair - I haven't really checked what these are going for.

Thanks for looking!:)
[/quote]