6G Celicas Forums

Anyone ever think about replacing the resistor box in for the blower motor w/ a PWM setup? I've seen continuously variable fans on luxery cars, and i'd like to apply the idea to our cars. I think it'd be cool to have that, plus those times when you want a fan speed that doesn't exist && you have to settle with too much air, or not enough. I can design the controller, thats not an issue, i was just wondering your opinion on whether its a good idea or not.

I'll finance that by being your first customer
I still have the older untouched CC you can play with also.
LMK.

BTW - My new LED CC is so fcukin BA with Paul's custom overlay. Thanks so much you guys

Okay Matt, I'll look into the wiring diagrams && see if i can design something thats "plug and play." Although there will be a minimum of two modules that will have to be installed if so.

i can help finance this as well

I have that spare CC unit within Stephen's general area you can use for core. The 3 of us can work all that out timing wise.

This post has been edited by DEATH: Jul 24, 2009 - 1:20 PM

Ok guys, doesn't look like I can make it plug && play. It will need a +12v source from somewhere (the +12v will be a low current line, though).
So you will have to splice one wire, and unplug the resistor box from behind the glove box. (optional, but recommended.)

I've got a capped line 12V already run to there anyway for something else that I no longer use - NP

anyone know where i can get that female plug thats on the blower switch?

My house - lord knows where. I'm actually int he middle of two moves at this point I think I'll let you know when that box turns up