6G Celicas Forums

The part number for the lever w/ foglight switch built in is 84140-20560. Looks like it's $63.57

I'm hoping it does man, I'll see if I get a pic later on today so you guys can see the damage on it right now.

And are there any sensors I will need to buy for the airbags?

Thanks man, will this work on my 94 ST, by that year there was no fog lights switch so don't if change from 94 ST to 96-99 models

You can make it work, but the thing with 94-95 celicas (usdm) is that they never came with foglights, so unlike the 96-99 there is no wiring already in place. You'll need to run your own wiring, which I don't know how it would be done. Its probably more work than it's worth.

On my old 95 I wired my JDM lamps to the wiring from the aftermarket PIAA lamps that were installed. They had their own switch inside the car.

Let's not stray off topic. Shoot me a PM if you've got more questions. Let's not clutter someone else's thread.

Here's the damage that's getting repaired-

Recieved this yesterday. Box contains 4 Headlights, 4rubber headlight thingys, 1 driver side airbag and an OEM shiftknob since I hate the aftermarket one I have.

You should put some air in that tire, might not be good for the rim long-term...but great progress!

Yea man I've been trying to take off the damn nut so I could put on the spare but its like jammed there. Lol that tube near the flat I used that to help me take off the nut, it helped alot on the others but one is stuck on there good.

Here are some shots I took today.

I said by the my baby today =(. Turned out the guy had time to do it this week. So he called me to drop it off, so off she goes for her new nose bones installed =). Hopeing the best for her





This aint me btw, his the tower.



Watching her get taken away.




Driving next-to shot.



Stopped.







Finally coming off to stay at the shop.



Would've tooken more shots of it inside the shop, but stupid brother ran off to take shots of a Integra GSR

I hope you guy's don't mind all the pic's, I just like taking a shoot whenever I get a chance.

Pics are always great. I would be a bit pissed at my car sitting on a trailer beside the lettering 'junk cars towed.'

hahaha, good eye. I didn't catch that myself lol I was too caught up in the moment.

Happy its gone butttt......

now I gotta find a way to get enough money to pay off the welding and crap. I wanna find a way to make a little bit more money so he can patch up the middle holes the ST spoiler makes. As well as cut and put in a new quarter panel. Small amount of rust, but it's annoying the crap out of me.

Just arrived- 94-95 spoiler, and safety bar. Now I need the bracket's that keep it up







This post has been edited by TiGZ461: Aug 27, 2009 - 8:11 PM

GT spoiler? You mean '94-'95 spoiler? Lol the GT and ST came with the same spoiler. The difference was simply the year.

Great progress though! I'm glad to see that the car is going to the shop for reconstruction! Are you going to do any of the work yourself, like putting the headlights or new bumper on or are you going to let the shop do it all?

Still thinking about it, I want them to do it but I barely have any money left. Right now I'm just trying to estimate how much money I need to get the car running. So depending on the outcome, I'll take it from there. But more then likely they'll do it, I want everything to line up and I'm also gonna have the holes the spoiler needs in the middle covered/patched or w.e and painted.


And lol yea very much still noobish with these 6g's, I'm trying my best

Hey, we all have to start somewhere You aren't near as much of a noob as I was.

If I were you, in an effort to save money, I would have them do any cutting/welding, and I would do the rest. You can install the crash bar, headlights, and bumper yourself with basic tools. Plus, that gets you the added benefit of working on your car and getting to know it better. You ever need to do anything later, like if you want to install the JDM projectors, you'll have the knowledge and experience necessary. ANd the bragging rights of saying you are bringing that car back, instead of paying somebody else to do it for you!

awesome tigz..i look foward to meetin u.

Lol, believe me, if there's anything I know I could do, I do it. And if I don't know how to do it, I'll try it anyway lol. But I want them to put it on so I know the welding was done right, and to make sure everything lines up as it should. The hood didn't line up to begin with so they have to heat it and pull it abit, aside from the welding. So I think it's a must for this situation. I wanna do it all myself but, I rather have everything like it came out of factory.



Same here shan , I want my little girl to take a look at how she'll be once I get some JDM steroids in her.

Of course! That's a given. Letting a body shop do it is easier It's what they do every day, so the job will be flawless, I'm sure. And 6gc's deserve nothing but the best.

And why does everyone live in New Jersey except for me

Lol, of course. Nothing but the best, and lol I knew noone lived here till awhile after the chat was put back. And to think everyone's less then 30mins away from me and I never seen one of the car's on the road.


Btw, back on topic concering the built.

The Celi, is another the knife. They gave me a call yesterday and they just want me to go drop off some other parts that I had forgotten about, so tomorrow I'll take pics of it in the shop and to see how far they've gotten.

These just came in for my baby.



Thanks to alaNi

This post has been edited by TiGZ461: Aug 29, 2009 - 1:49 PM