6G Celicas Forums

there is your answer right there. look at the first pic whatthe

http://www.6gc.net/forums/index.php?showtopic=14797

But thats a jspeed... C-one brother

the shape between the c-one and j-speed are identical. Im pretty sure. Still waiting for somebody else to confirm this...

Not true. The J speed sits about 1 cm lower then the C-One.
We compared the j speed, C one and cusco braces (thanks to the help of OC members) and found that the c one 3 point for the GT4 doesnt sit too well on a ST20x. Reason being is that the hood presses against the bar when you close it. You can shut the hood but it puts alot of pressure on the hood and you get scraping.
And popping the hood with a loud bang eventually warping your stock NA hood.
Same goes to the Cusco 2 pont and 3 point for the GT4 GT4.
Some people have used the cusco or C one GT4 on the ST20x by bending the bars a little. However this causes the two top mounts to distance apart and effects the cambers of the car.
We made these comparisons and kept it in mind when we designed the RTP 3 point strut brace.

This post has been edited by yellowchinaman: Sep 25, 2009 - 4:25 PM

how about the TRD 3 pt bar...? does it fit in the st205?

nope.

yellowchinaman btw, the that 3pt strut bar you've been making looks incredible. How much shipped over here ?

This post has been edited by Batman722: Sep 25, 2009 - 11:23 PM

sent you a PM batman

has anyone ever seen this one before?

http://www.nengun.com/c-one/lower-arm-bush-pillow-ball-front

Interesting, never seen it before.

on the website it says something about it being welded to the lower arm once it is installed. why would you have to weld it??

Just want to make sure will a st202 c-one 3pt fit under a st204? As in will it clear the engine and other object from a 5sfe that a 3sge may not have?

alright guys have a few questions that havent been answered. Will this work on the celica

http://www.nengun.com/c-one/lower-arm-bush-pillow-ball-front

And how about the c-one timing belt. Will it work for the 4th gen 3sge. I believe it will becuase it says it can be used for both 3rd gen 3sge and 4th gen 3sge but i want to know if anybody can back this up.

http://translate.google.com/translate?hl=e...1R2ADFA_enUS337

the first part/link might be a bit over the top? or unless your going full out I dont know sorry.





yes there are difference between the belts (one says 'vvti only car' & 'vvti no car')
http://www.c-one.co.jp/C-ONEPARTS/engine_belt.html

one will fit 3rd gen 3sge & 3sgte. - FE1356-ST200
this one will fit the BEAMS (redtop and blacktop). - FE1356-SXE10

I believe this will fit for anybody that plans on temporarily removing their rear windshield wiper , anybody know where you buy a cheaper one.

http://www.nengun.com/c-one/rear-wiper-hole-cover