6G Celicas Forums

Yeh both pair of holes are lined up the same just one is further away. Well vincent when you make sure. Im down for the floor bar

1. 808celica
-1 underbrace
-1 trunkbrace (if it fits like the c-one, which is a little more forward)
2. razor7
3. whatthe
4. Malpaso GT4 = No Luck
5. 94celicadude

1. 808celica
-1 underbrace
-1 trunkbrace (if it fits like the c-one, which is a little more forward)
2. razor7 - Trunk brace (no underbrace)
3. whatthe
4. Malpaso GT4 = No Luck
5. 94celicadude

Vincent,
Do you have to cut any holes into the trunk to get the trunk brace to fit? Will it just bolt right up? In one of the pictures I see a screw going through it, I imagine that this will connect to the frame itself?

Also, how difficult is it to get out the spare wheel? I imagine you can just slide out the covering from the front, then lift the wheel out.

-TC

This post has been edited by razor7: Sep 25, 2009 - 5:39 PM

It should bolt right on. Take off the black rubber plug and underneath is a bolt and thats where the brace should bolt on.

If that's the case, then I'm sold. If I have to cut into my trunk and frame... no way.

-TC

.....
i mean i couuuuld
but i do have and abundance of bars already.....

Whats this help?

Copy from other site:
"This trunk bar will help the trunk from flexing during spirited driving."
"After installation you will notice improved handling around corners."








No need to cut, bolt right on, those screws are actually belongs to our 6GC Trunk, just remove the black rubber Plug/lid at those spot, u can touch the bolt underneath

●リアトランク内フ レームエンド固定トランクバー　
●装着状態でスペアタイヤの脱着可能　

1. 808celica
-1 underbrace
-1 trunkbrace (if it fits like the c-one, which is a little more forward)
2. razor7 - Trunk brace (no underbrace)
3. whatthe
4. 94celicadude


note: thanks Vince for understanding. list updated w/o me...

1. 808celica
-1 underbrace
-1 trunkbrace (if it fits like the c-one, which is a little more forward)
2. razor7 - Trunk brace (no underbrace)
3. whatthe
4. 94celicadude
5. chacha - Both

Vincent does your mate who installed this in his car have anything to say about the floor bar?

I will be the kamikaze, but I need to clear out all the junks from my trunk 1st

I have a crazy thought, if it really helps a bit of cornering, I might install 2 pieces at the trunk, one near the end and another one futher away, dunno its feasible or not

did you get the idea of making the suspension bars from the integra type r.

http://www.youtube.com/watch?v=8pcseWzSKHQ hm i wonder why they put the rear trunk bar and the wall off the trunk??

do you only need one underbody lower arm bar.

jic always makes one for our cars, so im sure it must be doing something. http://www.jkcracing.com/product_info.php?...roducts_id=1136

This post has been edited by BonzaiCelica: Sep 27, 2009 - 2:13 AM

When will these be ready vincent?

Looking for the tanabe sustec inspired piece you made. When can I get it and does it bolt on easily? Thanks pls PM me if available and how i can send you a payment

Very soon, Since I test fit earlier today, took me less than 10 mins to bolt right on, impressive look
Not yet test drive thou.
Will test drive and post pics tomorrow

This post has been edited by vincent_doggy: Sep 29, 2009 - 3:17 PM

Will post some more info. or PM you once ready
Not as easy as Trunk bar, but shouldn't be hard, might take u 20 mins top.

No luck for spirited driving yet due to heavy rain
View some pics first:

hey well give me a price on the bottom brace and i will order one from u to thanks.


95-abel well give me price on the under brace bar and i will buy one from u to thanks