6G Celicas Forums

Damn, if you guys do another group buy in the spring, i'm down for sure!

Ahh, well we can't change that, but it should definitely go 3" or lower. We have them set with lots of 'thread' to spare in the photos above and the car is still lower than the TEIN S Tech's that were on prior to the install.

From the center of the fender lip to the center of the hub, the measurement on the black car is right at about 13" in both the front and the back. If someone can take this same measurement on a stock Celica, we will be able to know exactly how much the black Celica is lowered in the photos. Please see below for more info on how much lower these coilovers can go than we even have them set!

Here are two comparative photos to help when making your decision.
First photo shows pretty much the lowest the coilovers will go - any lower and the threaded sleeve would start coming through the bottom of the lower mount. The second photo shows after height adjustment was set to the levels you see on the black Celica. Pictured with one set of Eibach camber bolts. We ended up installing another set in the lower knuckles in order to achieve maximum clearance and minimal negative camber for the 17x8 WRX offset wheels and 235 tires. If you are using Celica offset wheels that don't result in such a clearance issue, you can see that you will have LOTS more lowering room than we used! Look at the difference in height between the two photos!

Still need those first 3 to join the GB!

Offer still valid, just waiting on a few members to take advantage of it! Let us know if there is anything else we can do, questions we can answer, etc!

Hey, ,im still interested. Quote would be great.

Please send your full shipping address over via PM and we will be glad to get an exact quote for you!

I might have to pick some of these up.

$850/set with Discount Code! Free Shipping (lower 48 states)! Brand New with Warranty!

We just need 3 members to commit before we can post/activate the discount code!

If I had the money, I would so be down for this. Too bad I'm broke as can be, hopefully this is still going on when I get the cash.

I'm in, and hopefully two other people! Does this model come with the top mounts that allow the camber to be adjusted? Either way I am excited.

Im in but i will have the money till next month for sure

Un mas por favor

Pls give this guy a quote, haha its about time you got to this mod.

Anyways in the pic, why is the camber bolt set to give it negative camber by the inward facing tab? I believe facing the tab out corrects negative camber (by giving postive camber) unless you want negative.

You crack me up man haha. Yeh i got pmd a quote. Its either this or Bc coilovers.

This model has front upper camber adjustment plates. The rears are not camber adjustable, so we recommend the use of the Eibach Pro-Alignment Rear Camber Bolts for 90-99 Toyota Celica GT/ST FWD (exc. All-Trac) if you need rear camber adjustment. We actually used two sets of these bolts in the black Celica pictured, but only one set in the upper knuckle bolt holes should do the trick in most cases.

Added you to the list in the original post! As soon as we have 2 more confirmed, we will publish the coupon code and payment can be made! Once the payment is received the coilovers will ship out!



Added to the list! Thanks!



Still waiting on a finalized/best rate. Hopefully it will be better than the preliminary quote we got through FedEx!

These bolts can be super confusing, there is a tab that goes into the actual hole as well as that outer tab. You can't see the inner tab once the bolts are installed. The inner tab is in the opposite orientation as the outer tab and lines up with the elliptical/cam area of the bolt. You really have to play with these bolts and tab orientations once you get them to make sure you are getting the adjustment you are looking for. The installation you see there is definitely providing positive camber adjustment. We installed the bottom set of bolts opposite the first and got some additional positive camber adjustment. Hope this helps explain a little bit better. Let me know if there is any more info I can provide that may help!

Come on guys, we need one more participant to kick this thing off!

Don't leave epocsirhc and 02bluerolla hanging!

To the top! One more person to get this going!

if i had that money on hand i would jump on them!

can i get a set for the ST185 All-Trac at this price?