6G Celicas Forums

hi all, this is a question for everyone who has done a gt4 conversion on a ST202, i was just wondering which method you have found best for attaching the front bumpers top two bolts. pics please if you have them.

i think malpaso used brackets that held up the center and azn advanced used bolt and nuts.

Look at the sticky on this. It has pictures that should help you alot! Also put some ppictures up.

yeah read the sticky,

just wondering what other people have done instead.

I cut out the st202 support and welded the st205 support in.

same here. The support for the bumper is about $50US from a dealer.

just tried using longer bolts and the bonnet lines up perfectly so i think thats the route i am gonna go with, i may make a spacer for them as well just for more support, the rest of the bolts and clips line up and fit no problem.

pics

will post pics tomo!

Cool Do you live over Wyre somewhere? I'm sure i passed you on Shard bridge.....?

yep, you could well have done but not used the celica for 2 weeks now so if its recent then it was an imposter!!

ok so all bolted on apart from 1 bolt, the small one on drivers side (uk) near headlight does not line up, anybody else had this problem? everything else lines up fine.

Ok bumper is nearly fitted!









as you can see not a bad fit at all the bonnet/bumper seal linesd up nicely apart from the drivers side where there is a bolt missing at the moment. i still have to bolt it to the wings either side and the trays underneath need to be bolted back on but apart from that its fitted. just need to get everything sprayed now.

Looks Great!

looks real good!

Very nice.