6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> FS: Custom Projector Headlights w/ Angel Eyes/LEDs, See Description within Thread
post Mar 18, 2010 - 1:16 AM
+Quote Post
Celiquick



Enthusiast
*
Joined Feb 6, '09
From Lexington, KY
Currently Offline

Reputation: 3 (100%)




http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=170460785300


Up for auction is a set of custom-made projector headlight housings for a sixth-generation (1994-1999) Toyota Celica. I am not the original developer of this specific set, but I’ve updated it the best I can. I would’ve installed this set on my Celica, but as of late, I do not possess it anymore.

I've pried them open and replaced all the LEDs, along with resistors, so they shouldn't burn out anytime soon. In turn, I've also newly resealed them, so any weather-related problem shouldn't be an issue, either. They have clear lenses and custom molds from an OEM housing that fits stock on the headlight mount and bumper.

There are 3 LEDs per housing: two in either direction of the halo-ring/angel eyes, and one as a side-marker in the upper portion of the housing. As far as the LEDs are concerned, you have the option of wiring them as you see fit: there two wires for each housing (positive (+) and negative (-) ). Personally, I would just simply wire them to the parking/running lights, just below the headlights.

The projector frame comes from what appears to be something of German-origin, either a BMW or a Mercedes-Benz. The original HID bulb was from a Mercedes, but any H3 bulb should fit; it just requires a few washers to hold it tightly in place.

OEM projector sets for this series of Celica run from $600.00-$750.00, however, since these are custom-made low-beams, with angel eyes/halos. I am only asking for a fraction of the price.

Just as a reminder, this auction is for the projector/headlight housing (which includes all the LEDs/LED wiring) ONLY – NOT the HID bulb set/HID ballast. If you wish to use this set to its full potential, I would recommend purchasing a HID ballast with a 9006 bulb plug input, with an H3 output bulb to fit in the housing.

I am currently running this FS via eBay as you can see ( http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=170460785300 ). However, if the auction falls through, I will consider taking the highest offer that I receive on here.

Images:

http://img.photobucket.com/albums/v280/td1...rs/DSC01570.jpg

http://img.photobucket.com/albums/v280/td1...rs/DSC01527.jpg

http://img.photobucket.com/albums/v280/td1...rs/DSC01520.jpg

http://img.photobucket.com/albums/v280/td1...rs/DSC01517.jpg

This post has been edited by Celiquick: Mar 18, 2010 - 1:17 AM


--------------------
---------------------------------------------------------------------------------------------------------------------------------------------------
Celiquick
'97 Celica ST "Really" Limited Edition

"I thought you always wanted an all-wheel drive, turbo-charged, Evo-eating machine sitting in your backyard.....who wouldn't?!?"

Celica FS/Part-out
post Mar 19, 2010 - 6:59 PM
+Quote Post
ajmorris1977



Enthusiast
***
Joined Jul 13, '09
Currently Offline

Reputation: 9 (91%)




OEM projector sets for this series of Celica run from $600.00-$750.00, however, since these are custom-made low-beams, with angel eyes/halos. I am only asking for a fraction of the price.

so what is a fraction of the price?


--------------------
You're here for a good time, not a long time. - Colin McRae
When in doubt... Flat out! - Colin McRae
Understeer is when you hit the wall with the front of the car.
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you....
post Mar 19, 2010 - 11:28 PM
+Quote Post
sugarfree

Enthusiast
**
Joined Dec 21, '05
From dallas
Currently Offline

Reputation: 3 (100%)




What do you mean the "projector/headlight housing"? Are you only selling something that we could use to make a projector/headlight with? Your not selling actual headlights right?
post Mar 22, 2010 - 2:38 AM
+Quote Post
Celiquick



Enthusiast
*
Joined Feb 6, '09
From Lexington, KY
Currently Offline

Reputation: 3 (100%)




QUOTE (ajmorris1977 @ Mar 19, 2010 - 7:59 PM) *
OEM projector sets for this series of Celica run from $600.00-$750.00, however, since these are custom-made low-beams, with angel eyes/halos. I am only asking for a fraction of the price.

so what is a fraction of the price?


It started $250, with $30.00, for shipping - I plan on using two Flat-Rate Boxes to ship these. But refer to the eBay link for an updated total.


QUOTE (sugarfree @ Mar 20, 2010 - 12:28 AM) *
What do you mean the "projector/headlight housing"? Are you only selling something that we could use to make a projector/headlight with? Your not selling actual headlights right?


No. The headlight housings are made and functional. I emphasize the "housing" because it does not include bulbs/HID kits. I've left those as they are, so the buyer may choose what output source he/she wants (preferred HID kit/ballast, bulb temperature, etc.), but I've left a few suggestions in the description, too. The LEDs that power the angel eyes/halos and side-markers have been recently replaced in both low beam housings to ensure that they don't burn out, either.

Coming back to the bulbs, the best way to tighten and keep the bulbs in place will be with some screws and washers that tighten the sides of the HID bulb flanks to prevent it from moving around. At least that's how I found them when I received this set last summer. One of the HID bulbs was burned out, and one of the HID kits had been mishandled from the previous owner, so I opted to purchase a new set via GriffGirl here on the forum.


--------------------
---------------------------------------------------------------------------------------------------------------------------------------------------
Celiquick
'97 Celica ST "Really" Limited Edition

"I thought you always wanted an all-wheel drive, turbo-charged, Evo-eating machine sitting in your backyard.....who wouldn't?!?"

Celica FS/Part-out
post Mar 22, 2010 - 5:57 AM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




those look ALOT like the ones doggy made for dustinbrown15 back in the day.


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Mar 22, 2010 - 9:54 AM
+Quote Post
Seztor



Enthusiast
**
Joined Mar 23, '08
From Denmark
Currently Offline

Reputation: 10 (100%)




So they have clear lenses installed on them?
PM


--------------------
[font=CELICA FOREVER][/font]
post Mar 22, 2010 - 10:14 AM
+Quote Post
spolski07



Enthusiast
*****
Joined Jul 7, '06
From Los Alamos, NM
Currently Offline

Reputation: 1 (100%)




QUOTE (presure2 @ Mar 22, 2010 - 5:57 AM) *
those look ALOT like the ones doggy made for dustinbrown15 back in the day.



these are dustins old projectors


--------------------
2015 Subaru WRX. World Rally Blue/Black
2001 Honda S2000. Spa Yellow/Black
post Mar 22, 2010 - 4:14 PM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




QUOTE (spolski07 @ Mar 22, 2010 - 10:14 AM) *
QUOTE (presure2 @ Mar 22, 2010 - 5:57 AM) *
those look ALOT like the ones doggy made for dustinbrown15 back in the day.



these are dustins old projectors

Thought so!!


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Mar 22, 2010 - 4:53 PM
+Quote Post
ajmorris1977



Enthusiast
***
Joined Jul 13, '09
Currently Offline

Reputation: 9 (91%)




i'm high bidder at the moment and i hope to win, think they would look great on my vert!


--------------------
You're here for a good time, not a long time. - Colin McRae
When in doubt... Flat out! - Colin McRae
Understeer is when you hit the wall with the front of the car.
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you....
post Mar 22, 2010 - 7:19 PM
+Quote Post
Celiquick



Enthusiast
*
Joined Feb 6, '09
From Lexington, KY
Currently Offline

Reputation: 3 (100%)




QUOTE (spolski07 @ Mar 22, 2010 - 11:14 AM) *
QUOTE (presure2 @ Mar 22, 2010 - 5:57 AM) *
those look ALOT like the ones doggy made for dustinbrown15 back in the day.



these are dustins old projectors


Yes, and yes they are.


--------------------
---------------------------------------------------------------------------------------------------------------------------------------------------
Celiquick
'97 Celica ST "Really" Limited Edition

"I thought you always wanted an all-wheel drive, turbo-charged, Evo-eating machine sitting in your backyard.....who wouldn't?!?"

Celica FS/Part-out
post Mar 22, 2010 - 11:06 PM
+Quote Post
CAMAricer



Enthusiast
***
Joined Jul 25, '07
From San Francisco
Currently Offline

Reputation: 3 (100%)




Oops, didn't see this until now. Won't get into a bidding war with you James, hope you win.


QUOTE (ajmorris1977 @ Mar 22, 2010 - 2:53 PM) *
i'm high bidder at the moment and i hope to win, think they would look great on my vert!



--------------------

2002 SC430 (WC) - 19" SSR Comp-H, Daizen swaybars, Sparco Demons, JDM Soarer conversion, carbon fiber spoiler, Injen intake, front strut bar, drilled/slotted Brembo rotors
1997 Celica ST (DD) - 17" ADR, ViS Zyclone CF hood, ViS CF hatch, K&N intake, Invader body kit
post Mar 23, 2010 - 11:12 AM
+Quote Post
ajmorris1977



Enthusiast
***
Joined Jul 13, '09
Currently Offline

Reputation: 9 (91%)




its not looking good for me, its within $20 of the top of my budget and it still has over a day left, fingers crossed but if someone wants them and can afford them then thats whats ment to be......

QUOTE (CAMAricer @ Mar 23, 2010 - 12:06 AM) *
Oops, didn't see this until now. Won't get into a bidding war with you James, hope you win.


QUOTE (ajmorris1977 @ Mar 22, 2010 - 2:53 PM) *
i'm high bidder at the moment and i hope to win, think they would look great on my vert!




--------------------
You're here for a good time, not a long time. - Colin McRae
When in doubt... Flat out! - Colin McRae
Understeer is when you hit the wall with the front of the car.
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you....
post Mar 26, 2010 - 8:12 PM
+Quote Post
ajmorris1977



Enthusiast
***
Joined Jul 13, '09
Currently Offline

Reputation: 9 (91%)




WOW! I Won!!!!!! paid via paypal just now and can't wait to get them installed..... thank you.


--------------------
You're here for a good time, not a long time. - Colin McRae
When in doubt... Flat out! - Colin McRae
Understeer is when you hit the wall with the front of the car.
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you....
post Apr 3, 2010 - 8:13 AM
+Quote Post
essexgt4

Enthusiast

Joined Jun 7, '09
From essex,uk
Currently Offline

Reputation: 0 (0%)




does anybody know where to get the clear lenses from?

Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 12:44 AM