![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Sep 6, '04 From oakdale Mn Currently Offline Reputation: 0 (0%) ![]() |
only the front have the adjustable plates on them...the rears do not...and on our setup and caster cannot be adjusted...i have my tires tucked with 17's...u need to slam yours more dude....i can go another inch lower if i want lol
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%) ![]() |
only the front have the adjustable plates on them...the rears do not...and on our setup and caster cannot be adjusted...i have my tires tucked with 17's...u need to slam yours more dude....i can go another inch lower if i want lol the rears are adjustable for camber... just not as adjustable.... an alignment is a good idea, non the less -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) ![]() |
yeah...i thought so too...the camber adjusty are on the pillow mounts. but the questions are: how do i adjust them accordingly? is this part for the shop or can i do it myself? if i were to do it, does anyone know the proper way to adjust it...is there something i can use to go on to get corrected adjustments?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%) ![]() |
You can adjust yourself any where from 0 to stightly negative
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Sep 6, '04 From oakdale Mn Currently Offline Reputation: 0 (0%) ![]() |
most of the time u can eyeball it and take note of the tire wear. i'm so low that my rears still have neg camber even though i have a the eibach camber bolt in the top of the strut. most shops will charge ya around 50-60 bucks or find a buddy who works in a shop to do it for a case of beer. apparently ksport may have came out with a diff setup cuz mine do not have a rear camber plate
This post has been edited by rjbibeau: Mar 24, 2010 - 11:15 AM -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) ![]() |
not to thread jack but was wondering how u like the coilovers, thinking about putting them on mine but its my dd
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%) ![]() |
well i like mine... i wish they were a differnt color though... i got an older version for $700. the new ones look great too!
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
most of the time u can eyeball it and take note of the tire wear. i'm so low that my rears still have neg camber even though i have a the eibach camber bolt in the top of the strut. most shops will charge ya around 50-60 bucks or find a buddy who works in a shop to do it for a case of beer. apparently ksport may have came out with a diff setup cuz mine do not have a rear camber plate Yeh your right. The eibach is only good for up to 1.75degrees both way. And with a camber of like -3 (what i have atm) that camber kit wont get a result of -1 which is what im after. How can you put on a camber plate on the back? Its pretty impoosible as even if there was a camber plate its impossible to adjust it as the chassis setup willl block adjustability. No? -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Sep 6, '04 From oakdale Mn Currently Offline Reputation: 0 (0%) ![]() |
they are way nice...better then the stock strut and coilover setup thats for sure...no more botom out clunking sound....i ride em on #2-3 and its a perfect ride....threw em on 36 and i damn near went though the roof....these babies were the best thing i have ever purchased...mine are orange what color is yours...i got mine when they first came out
This post has been edited by rjbibeau: Mar 24, 2010 - 5:22 PM -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%) ![]() |
they are way nice...better then the stock strut and coilover setup thats for sure...no more botom out clunking sound....i ride em on #2-3 and its a perfect ride....threw em on 36 and i damn near went though the roof....these babies were the best thing i have ever purchased...mine are orange what color is yours...i got mine when they first came out haha these coils are nice. there is camber adjustment in the rear for 4 different setting i believe (not as adjustable as the front). i ground out a bit of the car to make more positive camber. you can also grind out the hole where the knuckle and strut meet (2 19mm bolts). i believe all ksports are orange. i like the purple d2 coils because of the color. i don't like the ksport orange and the deep jewel green together lol. -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Sep 6, '04 From oakdale Mn Currently Offline Reputation: 0 (0%) ![]() |
damn mine doesn't have the adjustments in the rear at all...take a pic if ya can im kinda interested in how its set up...are there markings on yours
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
i like how our versions are orange. they stand out more than the new black versions
-------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%) ![]() |
damn mine doesn't have the adjustments in the rear at all...take a pic if ya can im kinda interested in how its set up...are there markings on yours no marking, just a few different settings... -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) ![]() |
with these install for those who do have it...what is the angle all ya'll have for the fronts and rear...the furthest i got mines for the fronts were only -2 i think without the camber bolts for fronts, but just with the ksport adj camber plate.
|
![]() |
|
Enthusiast Joined Mar 24, '10 From Finland Currently Offline Reputation: 0 (0%) ![]() |
Is the inverted model for st205 bolt on just like tein`s coilover kit?
|
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 10:05 AM |