6G Celicas Forums

Hello, my name is Ger aka ZGear from the Mid-West. Haven't really responded to this forum in all the years I've joined. Though I have supported this site in Minnesota with my 6gc passion.

My initial plans were to save up and buy a blacktop 4a, but in doing so I managed to come across a good deal on a 1st gen 3sgte locally. Whole motor without tranny and a few extra parts for a shiny nickel.

My car, stock as ever for about 5 years.



Then an exterior renovation in 2007



Also an engine face lift



This is how she sat for half a year with a case of bad crank bearing.



----------------------------------------------------------

Now for the good stuff:

----------------------------------------------------------

BCCentaur and associates: "Blizzard Tuning"



Sorry, wasn't able to do the signature Dr. Tweak pose..... , but it is shiny!
Not shown: deleted AC, power steering, and egr.



7afe Part-out time!



-----------------------------------------------------------

What will be going in........ Da Da Dum Dum



1st Gen 3sgte with a TRD low comp head gasket. Comes with a 6GC converted harness for a GT, now all I need is motor mounts, tranny, intercooler, bov, downpipe, seals, etc......

This will be my first turbo motor and a good learning experience before I play with the big boys. I'll try to update along with the progression.

cool stuff man. gonna be interesting to see how this comes out

1st gen as in st165 1st gen? how is that one different from the second and third gens?

Lower horse power rating at about 190-210, what a 7afte would produce under mild boost, but with the stronger 3sgte's internal components. Single-entry turbo, but I was told that the one on there is the twin-entry from the 2nd gen CT-26. Also W-to-A intercooled and equipped with TVIS, but on this motor the TVIS was blocked off. Bunch of what I read and researched, maybe the pros will shine in.

This post has been edited by ZGear: Apr 7, 2010 - 3:30 AM

Niiice! I look forward to this.

lol i got 3 of those engines in my shop if you need parts let me know

-Bryce

Uh, where in Oregon are you?

He will more than likely need the oil cooler stuff. Maybe the stock oil hard lines too, since the previous owner hacked that into pieces.

I honestly can't wait to see this thing up and running. It has been sitting for quit sometime. I miss the 10 feet launches lol!!!!

i think i know who u got the motor from...did it come outta white 6gc by any chance...

Nope a red one.

So what are the goals power wise?

The stock 200 hp is good DD power for me, maybe 220 - 240 at a higher boost. Later down the road, with a rebuild and a different turbo set-up to maybe about 270-300.

500whp or bust

This post has been edited by Nartanian: Apr 11, 2010 - 9:34 PM

This past weekend has been glorious. Although the MN crew did massacre a 6GC, but in doing so to save the lives of many 6GCs.

Smoked Tails. Anyone Want?


Came with side skirts! Alas, my car can bling.


Big no no on hood scoop. Although I see an intercooler.


Painted GT Alloys


Oh my! A second gen 3S. Unfortunately a mr2 owner will be getting this. There was rod-a-knockin.


Could of done a better job with the ground wire tuck.


AFm just flopping around the engine bay with a plastic bendable pipe.


Greddy Type RS Bov for the taking.


Hacked igniter


-------------------------------------------------------

MN 6GC crew at it. RunningLow, Muggs, and BCCCentaur. (not shown: ZGear "taking some pics")


Someone's Molded project becomes my worst nightmare project. Had to grind the paint and bondo to bare metal and fiberglass. The screws also were not the very best at come off again. By pulling a bit too hard the skirts did start to crack, still rebuildable.


About another 10 minutes into it with no progress.....hmmmmm I wonder why.


What!!!! Polyurethane was a pain to break off from the body.


-------------------------------------------------------

Auto To Manual


Shifter Assembly from the donor car


Drilled clutch pedal and mounted


Drilled master cylinder and mounted


Shifter cables over and out


This post has been edited by ZGear: May 5, 2010 - 6:54 PM

Just beautiful. All that is missing is the Doctor tweak pose. We are going to have you do that tomorrow.

Portland

well done!!!!!!..hey when did u take that picture!

dude u guys made my day haha cant believe there is 6gc tuners so close! im here in wisconsin and will be doing a swap very soon hopefully a meet in the near future! have fun with the swap guys!!!

So who was the owner of the donor car?

Runnin-Low's buddy I guess.


The 2nd gen spun a rod in the donor car.

So Zgear (Ger) will be installing the gt front spindle to accommodate the GT front brakes. And he will also be using the rear discs for his ST too.

GER, I'm waiting for you to drop the harness of to me lazy ass!!!