6G Celicas Forums

Ok so I am trying to install my Rockford Fosgate Amp and the only problem I have is finding the firewall so I can put the power cable through my car. Any help guys/girls? I tried searching on here, but came up empty handed. Pictures would be great.

Look to the driver's side of the firewall. Roughly directly in line with the battery is a thin blue wire going into the firewall. I put my 8 gauge power wire through there, and it works perfectly seeing as there's already a sizable hole and a grommet to cover the bare metal. The wire should come out somewhere above the dead pedal (foot rest).

This also sets up the wire nicely to be routed through the left of the car. Just take off the kick panel, door sill (there are plastic boxes under the sill that contain wiring, there's a handy few guide hooks attached to the boxes that you can snap the power wire into; you'll see what I mean when you've removed it) , move the rear speaker panel out of the way, and route the wire under the driver's side panel in the trunk. Then just hide all of the wires under the carpet.



This post has been edited by SwissFerdi: Apr 25, 2010 - 10:09 PM

http://www.6gc.net/forums/index.php?showtopic=69889&hl=
link to another similiar topic
good luck!

just on the opposite side where the strut tower area is, there is already a hole for wires, stick it through and then open your shield and get it through the nipple.

X2 This is probably all you'd need.

Thanks for everything guys, I got it. It sure does hit too