 The time has come.... WRC 3sgte swap!!!, Update 10/05 pg2 |
  |
 Jul 12, 2010 - 5:07 AM
|
 
|
 Enthusiast  Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%)  |
Well this is the second greatest mod i have done to my car...
my first progress thread is here My progress Thread i wanted to do this swap last year but problems came and i had just not enough money to afford a 3sgte. but thanks to Jim i got a WRC 3sgte... by the way thanks a lot jim for everything! the engine arrived a month ago, but i havent had much time to work on it, and since i dont have an engine stand it is harder to work on it.. i might only update the thread once or twice a week, but slowly i will get there. To start, i will do the swap myself with help of some friends, i will not let a mechanic do the job since i dont think it is really hard to do a swap. It will be frustrating at some points but not impossible. Also i want to know what will be under the hood and learn from mistakes. I am not an expert, in fact i do not have much mechanical experience but i know i can do it. so forgive me because i might ask stupid things now and then but i am here to learn. and with the help of this community i know we can pull it off. So please guys help me with advices or questions i might have. the set up= WRC 3sgte with LSD E-153 ok here are 2 pics of the engine the day it arrived, i should of taken more but forgot to,   ok its late and need to sleep, will update the thread tomorrow. This post has been edited by joehernandez: Oct 5, 2010 - 5:33 PM --------------------  |
|
Jul 12, 2010 - 5:52 AM
|
|
 Enthusiast Joined Mar 6, '04 From Charlotte, NC Currently Offline Reputation: 9 (100%) |
Congratulations on the WRC 3S Joe!
It's encouraging to watch members do this themselves. I wish you the best of luck and can't wait to see the finished project. -------------------- Has no more Celicas
|
|
Jul 13, 2010 - 5:30 AM
|
|
 Enthusiast Joined Sep 29, '09 From Prince George, BC CANADA EH! Currently Offline Reputation: 8 (100%) |
a whole front clip would have been a much better buy....but you've got the heart of the beast now.
Have you sourced out your other stuff yet? (wiring harness, ecu, etc) -------------------- ST205 Crew represent
 Challenge Accepted |
|
Jul 13, 2010 - 6:07 AM
|
|
 Enthusiast Joined Sep 22, '08 From Bergenfield Currently Offline Reputation: 5 (78%) |
^^^ There is no need, he bought the engine set from me and all my engine sets come with everything needed needed to install into your Celica. I even include mounts for the ST guys.
--------------------
 |
|
Jul 13, 2010 - 2:44 PM
|
|
|
Enthusiast Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) |
QUOTE (schmooot @ Jul 13, 2010 - 6:30 AM)  a whole front clip would have been a much better buy....but you've got the heart of the beast now. Have you sourced out your other stuff yet? (wiring harness, ecu, etc) the engine set came from jim, it does have everything needed, at first i wanted a clip but since jim had it with everything needed i went for it. i only have to buy the axels from the all trac,, some gaskets, i already have everything needed for the auto to manual swap,, and i would probably buy a clutch, that pretty much is all needed. QUOTE (_Jim_ @ Jul 13, 2010 - 7:07 AM) ^^^ There is no need, he bought the engine set from me and all my engine sets come with everything needed needed to install into your Celica. I even include mounts for the ST guys. heard that right guys, everything is included!! -------------------- |
|
Jul 13, 2010 - 2:52 PM
|
|
|
Enthusiast Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) |
ok guys small update,
here is how the engine sits as of right now, i removed throttle body, intercooler, valve cover, and lots of misc pieces...  the intercooler is in perfect condition, only the toyota sticker is a little scratched but i will get a new one.  and i sourced thanks to malpaso a brand new walbro fuel pump  next i will paint some of the engine parts like the valve cover, and the heat shield. anyone has a good idea of what would be best to clean those parts without leaving any grease on them before painting them? like sanding it down or pressure wash... i found this and i will try it to see how it goes Lagos valve cover -------------------- |
|
Jul 13, 2010 - 3:13 PM
|
|
 Enthusiast Joined Jul 27, '06 From Soda Currently Offline Reputation: 9 (91%) |
Damn, everyones swapping! Did you get a clip?
--------------------  |
|
Jul 13, 2010 - 3:17 PM
|
|
|
Enthusiast Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) |
QUOTE (block @ Jul 13, 2010 - 3:13 PM) Damn, everyones swapping! Did you get a clip? nope i didnt got a clip, rpm garage was selling a really complete clip but it was not a n wrc and to tell the truth that clip would of cost me an arm an leg to get it here. i decided to go with jim, he sold me the engine set with EVERYTHING needed. i only needed to source some obvious stuff like axels and gaskets that was pretty much all. -------------------- |
|
Jul 13, 2010 - 4:12 PM
|
|
 Enthusiast Joined Jan 26, '09 From Los Angeles Currently Offline Reputation: 1 (100%) |
Glad to know you are in the beginning stages. I will be in that position here soon. (I'm in the process of buying a set from Jim as well)
I will be referring to this thread many times throughout my build. As for cleaning. I've always liked the GUNK foam engine cleaner for the first off clean. Afterwards I used brake parts cleaner and scotch pads. I've never painted on that so you may want to wait for the guys who have painted.. Goodluck with the swap!  Edit: Did you buy the fuel pump from Malpaso? This post has been edited by Malek: Jul 13, 2010 - 4:19 PM -------------------- |
|
Jul 13, 2010 - 6:45 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
that walboro is a 341, im not sure it will work in the 6th gen, i know in Eryns car i put a 342 in it. you see how the inlet and outlet are on opposite sides of the pump. you want them to be on the same side. thats why you should get a 342
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Jul 13, 2010 - 7:34 PM
|
|
|
Enthusiast Joined Jul 27, '06 From Soda Currently Offline Reputation: 9 (91%) |
QUOTE (joehernandez @ Jul 13, 2010 - 3:17 PM) QUOTE (block @ Jul 13, 2010 - 3:13 PM) Damn, everyones swapping! Did you get a clip? nope i didnt got a clip, rpm garage was selling a really complete clip but it was not a n wrc and to tell the truth that clip would of cost me an arm an leg to get it here. i decided to go with jim, he sold me the engine set with EVERYTHING needed. i only needed to source some obvious stuff like axels and gaskets that was pretty much all. hehe dude sorry. my phone was behind and didnt upload the first responses lol. im hoping to get a clip from JIM next spring. good luck on your swap and ill be watching 
-------------------- |
|
Jul 13, 2010 - 9:40 PM
|
|
 Enthusiast Joined Apr 4, '05 From ST PAUL, MN Currently Offline Reputation: 3 (100%) |
congratz welcome to the gen3 club!
--------------------  |
|
Jul 14, 2010 - 3:42 AM
|
|
|
Enthusiast Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) |
QUOTE (WannabeGT4 @ Sep 19, 2006 - 11:00 PM) The GSS-342 fuel pump and 400-765 install kit are the correct Walbro part numbers for our cars that are swapped or turboed. I bought the GSS-341 since that's what I found to be recommended during a search here, but it's inlet and outlet are reversed compared to our stock pump...  Our stock pump looks almost identical to the pump on the left. The Walbro pumps in that picture are identical except that the one on the right has the inlets and outlets offset for use in the MR2 Turbo and Supra TT. That is the only difference between the 341 and 342, they are both 255lph Hi Pressure pumps. I got the GSS-341 to work but it doesn't sit in the pump bracket correctly. A zip tie was added for peace of mind. Also, on the stock fuel pump plug, the blue wire is the positive 12v source. It is to be spliced into the red wire on the Walbro plug. Obviously, the two remaining black wires will be spliced together. If anyone has any advice on how to install the filter retaining clip let me know. I finaly got it to go on but it sure seemed like it was more trouble than it should have been. QUOTE (Smaay @ Jul 13, 2010 - 6:45 PM) that walboro is a 341, im not sure it will work in the 6th gen, i know in Eryns car i put a 342 in it. you see how the inlet and outlet are on opposite sides of the pump. you want them to be on the same side. thats why you should get a 342 i did a little of research and it does, it only needs a zip tie. or something to hold it in place -------------------- |
|
Jul 14, 2010 - 5:07 AM
|
|
|
Enthusiast Joined Feb 14, '09 From Mid West Currently Offline Reputation: 7 (100%) |
Hey Joe,
That's bitchin'!!! Good luck!!! |
|
Jul 14, 2010 - 9:15 AM
|
|
 Enthusiast Joined Dec 14, '08 From La La Land.. Currently Offline Reputation: 6 (100%) |
great addition to the car man.. you must be very excited! looks and speed!!
-------------------- -----------
Stay Conscious and Aware - Do not decide who to trust, decide which ideas to trust. |
|
Jul 14, 2010 - 11:17 AM
|
|
 Enthusiast Joined Jan 10, '09 From Burtonsville, Maryland Currently Offline Reputation: 1 (100%) |
good luck to you!!!!
-------------------- THIS IS WHERE WE HOLD THEM!
Still trying to find the cure for ST205 asthma.. 6gc.net's outlaw vigilante because im a LEADER not a follower.  |
|
Jul 14, 2010 - 11:38 AM
|
|
|
Enthusiast Joined Jan 10, '09 From Burtonsville, Maryland Currently Offline Reputation: 1 (100%) |
QUOTE (joehernandez @ Jul 12, 2010 - 5:07 AM) that set looks just like mine you will most likely have to do more wiring then people with a clip(Manny's swap for ex.) as intercooler relay/fuse box will be missing. Maybe you lucked out tho and its there. its right next to intake. Looks like this:  if not, Batman provided me with this when I was doing my swap and it helped out alot:   good luck again dude! hope it all works out -------------------- THIS IS WHERE WE HOLD THEM!
Still trying to find the cure for ST205 asthma.. 6gc.net's outlaw vigilante because im a LEADER not a follower. |
|
Jul 14, 2010 - 4:37 PM
|
|
|
Enthusiast Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) |
QUOTE (Bigblock @ Jul 14, 2010 - 6:07 AM) Hey Joe, That's bitchin'!!! Good luck!!! thanks a looot! still a noob though lol QUOTE (MacgibaS2 @ Jul 14, 2010 - 10:15 AM) great addition to the car man.. you must be very excited! looks and speed!! i am however i am kind of stressed that i dont have time to work on the engine and since i dont have another car is more frustrating but really excited QUOTE (SlvrCelica09 @ Jul 14, 2010 - 12:38 PM) you will most likely have to do more wiring then people with a clip(Manny's swap for ex.) as intercooler relay/fuse box will be missing. Maybe you lucked out tho and its there. its right next to intake. Looks like this: if not, Batman provided me with this when I was doing my swap and it helped out alot: good luck again dude! hope it all works out yeah mine didn't come with that fuse box, will ask jim if he has any spare one, as of right now i havent really looked at diagrams so i dont have a clear picture how to read them but once i get into that i will learn how to read those thanks a lot !!!!!!! you did your wiring? what other stuff needs to be re-wired? i know i will not extend my wiring, i will just cut a hole in the fire wall. -------------------- |
|
Jul 14, 2010 - 6:17 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
 what im worried about is the stock hanger is set up for the sock to sit in this position. with a 341 it will be all wrong. you would have to cut off the base of the hanger and then put a clamp around it to hold it. why dont you just sell that 341 and buy the right pump? -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Jul 14, 2010 - 6:49 PM
|
|
|
Enthusiast Joined Jan 10, '09 From Burtonsville, Maryland Currently Offline Reputation: 1 (100%) |
QUOTE (joehernandez @ Jul 14, 2010 - 4:37 PM) yeah mine didn't come with that fuse box, will ask jim if he has any spare one, as of right now i havent really looked at diagrams so i dont have a clear picture how to read them but once i get into that i will learn how to read those thanks a lot !!!!!!! you did your wiring? what other stuff needs to be re-wired? i know i will not extend my wiring, i will just cut a hole in the fire wall. yea I did mine, besides that fuse box wiring, you just need to do the clutch start sequence, add wire's to the body panel and engine bay fuse panel. Check out manny's swap.. its awesome dude.. everything you need to know besides the fuse box you don't have. Just study those diagrams and you should be solid dude. -------------------- THIS IS WHERE WE HOLD THEM!
Still trying to find the cure for ST205 asthma.. 6gc.net's outlaw vigilante because im a LEADER not a follower. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 5:34 AM |