6G Celicas Forums

I feel your pain. But at least you are ok.

Thanks guys, and if the engine was shifted, that would be the only way I'd junk it, well actually I would part it out and then junk it, but that's not the case.
Have some pics uploading of what I've taken off. She looks a lot better than with all the crap on. Once I get the radiators and support off, and the fender off, it'll look like she's just getting some new parts.

Here are some updated pics.



















That's that for today's work, might get the rad support off tomorrow and both fenders.

Ouch dude... Hope the rebuild goes well!

Ouch, radiator support is toast.

You'll also need a new bumper reinforcement/weatherstripping bar, I see.

I have your two driver's side headlights in near-mint condition, PM me if you're interested, see my thread in my signature for details.

Actually the radiator support is welded in multiple spots. And there is also a bar that holds the top of the bumper in place that is also welded in place. Fenders look salvageable with a hammer and dollie which is good cause they are $280 a piece last I checked NOS. Here is the site you need I did a rebuild on my Celica which was in FAR worse shape (wreck 3 of now 7). Just take your time. Headlights are stupid cheap on ebay especially JDM ones.

http://www.trademotion.com/partlocator/ind...m?siteid=214591

So I just got back from vacation today, and I'm going to be getting parts little by little.
To Espo and Agent21, I already got the radiator support out. Pretty much the whole front area is torn out.
First off, I'm going to get a radiator & support, along with the a/c condenser, coolant holder, and a ton of bolts. I have to drill a few out cause they snapped on me =/
The two worst ones were the ones that snapped on the side of the fender by the door hinges. It's going to be a b**** to get them out..ughh.