6G Celicas Forums

I've been lagging on one of these, but I finally have the time to start one up. My mods will come slowly but surely due to minimum wage But I'll keep truckin'!

I was actually trying and trying so hard to buy a 240, I love the things, but every single one I'd find was either too expensive because they were all SR20'd and S15'd out, or too beat down and crappy. But then one day I came across this Celica because the poster had put '240sx' as a tag. I had honestly never even considered a Celica for a second, when I thought Celica, I thought 7gc, and I never liked those. But once I saw this Celica, I fell in love. And thanks to Spider77, I found this site and it's helped me since day 1. Now that I've got a progress thread, I'll start updating it often. Thanks for looking!

The first day I got her. I actually bought her from a member, vi-tuyen.


Then the very first mod when I started working... early June. Injen SRI w/ Fujita filter. Bought from trdproven.

Out


In


Then I picked up an OEM strut bar from a local part out in late June


Three days after the strut bar, I got into a fender bender with an 18 wheeler. I swiped his tire. Luckily, I was fine, and no damage to the truck, and little damage to my car.

Damage assessment: Cracked bumper, totaled RH fender, smashed sidemarker, bent strut, bent wheel.

Literally 20 minutes before the wreck

sexy angle

Then when I got home afterwards

Side


Front (see the obvious neg camber? lolol)


This post has been edited by HectortheRican: Apr 10, 2016 - 2:01 AM

At least now you have good offset... Your tyres are sticking past the fenders right?

Haha, funny guy I finally picked up the new fender today, now I've got everything I need to make her sexy again. It gets fixed on Saturday!

nice! keep us updated. and go at it with the modding, once you start,.... you'll NEVER stop! hahhahaah

I didn't take a whole lot of pics of the repair process, as it's kind of hard for only two people to work and one to take pictures. Next time, I'll have a designated picture-taker. But until I get the rest uploaded, here's the final product of my little weekend project

I'm not going lie your car looks good its really clean. I like the stock look with subtle rims maybe just a little lower. but that camaro behind you looks sweet love the color

Thanks! It'll be lowered about 1.5-2 inches in about 2 weeks and I'm getting the Euro-spec splitters soon. I'm keeping her nice and OEM

On 7/24, exactly a month after the wreck, I finally collected all the parts I needed to complete the repair. My buddy Taylor came over at 11:00am and we started work.

Facelifted bumper I pulled off a local '98 GT. Originally white, had it painted 202


Fender from Taiwan (Had slight trouble with fitment.) Also painted 202


We got the crushed fender and headlight out and Taylor was working on the LH liner



Forgot to take out the stock intake resonator when I installed the Injen back in June.. woops!


We were wondering what to do with the bent bracket, then the mailman pulled up and low and behold, the bracket I ordered from novak17 came right on time!


Little close up of the bumper


Taylor's got a new drift charm! lolol

(we bent up the damaged fender)

I gave the old bumper to my uncle, he wants to make some sort of light for the garage out of it...


Teaser pic that I had put up earlier


I didn't do too good of a job with the pictures, but I remembered every now and then. We worked straight from 11;00am to 5:00pm with no breaks. Fun little weekend project!

This post has been edited by HectortheRican: Jul 26, 2010 - 5:10 PM

WOOOOOOOOOOOOOOOOOOOOOT!! haha

nice job man! lovin the work. Can't wait to see it once you get some more of your new parts in and then put on!

way to go

Looking pretty good, maybe I'll have a chance to meet up with you this sunday?

I was sure hoping so, but that truck is still coming in, I gotta stay and unload it. It's big things too.. tractors, fridges, ovens.. Sorry bro

Its nice to see the celica back up and looking better than ever.

Just ordered the crystal clear Depo turn signals from eBay

Did you get the full set or just the signals?

I'm assuming that the guy I bought the side markers from (97celiman) had the Depo ones because the side markers are crystal clear like the Depo's will be, but my stock clear turns aren't as crystal-clear.

Welp, found out I have a flat today. It'll be repaired tomorrow afternoon. I'm rolling on the spare right now. But on the bright side, I installed the diamond clear Depo turn signals yesterday and I received the SSIII grille and fog covers I ordered from vincent_doggy today. Pictures up later.

WOW you did great work!!

Here's hoping the gremlins leave the Celica community!!

Finally got around to making my SSIII grille fit. I put in the pins, but they would hold to the crash bar, so I could only think of one thing... my trusty roll of black duct tape worked perfectly! And I used 3 thin zip ties to secure the grille to the 3 posts in the middle.

Crappy cell phone picture, but you guys get the gist Notice Piccolo on the rearview? SPECIAL BEAM CANNON!

On a simpler note, I went to Home Depot and replaced the rear license plate bolts (Used to be RUSTY) Now they're nice and shiny And I ordered a set of Falken 512's!

This post has been edited by HectortheRican: Aug 4, 2010 - 1:18 AM

I like the progress youve made with this so far. Its a shame that the seller didnt include all the other stuff with it...But it is looking nice.

That's EXACTLY what I thought when I found his old FS post! All I could say was a big WTF. But thanks a lot!