6G Celicas Forums

Okay yeah, E-Bay kit is failboat city. Hah.

Also, Steven is a mad geinus, Heed his words.

Finaly, Do not Never, Ever doubt the ability for things to fail on you when you haven't even touched them.

You're only getting a clicking sound? No "reh-Heh" noise at all? Could be starter. Is everything grounded well? And you replaced the large gauged positive starter terminal cable on it TIGHTLY? That can lead to a burt out starter too.

What was the result of the test anyway?

starter is fine, changed the plug but same symptoms...
and if the kit was bad, then should i be getting the "reh-heh" sound or something?

oh and i do smell a little gas(petrol)...not much but just a little!

Air, Fuel, and Spark? Got'em, find what your missing, start from there.

Grounds.....

how do i check



if it was a grounding error...should i not be able to listen to the stereo or anything?

check your fuse box and make sure you clipped it in properly because you prolly have it loose

I was thinking the same thing, I helped with an Engine swap in my friends Civic, we did everything right hooked up everything the way it was suppose to be hooked up and it wouldn't start, we started looking around and my friend bumped a wire against the frame and a huge spark scarred the crap outta us and I asked if he connected the grounds, funny thing it was all it needed lol

use a volt meter dc volt setting

pos lead to starter casing

ned lead to neg post on the battery

have a friend turn the key trying to crank

while trying to crank you should have less then .2v or 200mv

if you have any more then that you have a bad ground connection or ground wire

okay i was looking through all the wires, and then WOW....i forgot to ground the starter!!!
i felt so dumb!!!

but another problem cam up, now gas is leaking from the injector place...

which brings up another question..

are there any kind of rings which to in the injectors or rail or head cuz i had A LOT of them left after the rebuild...


i picture would really be nice, like of what goes b/w the injectors...

Wow you had spare parts left over? thats always a bad thing if you know you didn't buy them as extra's. well the fuel injectors have a grommet and O-Ring but i'm not an expert on this

yeah they have o-rings. both on the fuel rail (top of injectors) and bottom (manifold side)

yup it was the "O-ring problem" and thats solved....

but now my engine oil i believe is leaking...my mechanic i gone and will be back in about a week...any suggestions what it could be?
its leaking from behind the timing belt place...

what i think is that its rubber thing which is on the head...it looks like a filler to keep the oil in....i think its suppose to be metal and not rubber b/c my old head has steel..but my mechanic thinks im wrong and it might be the oil pump...


ill get some pics soon...

PS: if somebody is in the houston area, can u please please come over and take a look...maybe its something stupid..i would really appreciate it....i live on the westgreen and fry rd intersection somewhat near i-10 and mason..(next to the fire station)

thank you

Tranny didn't have a fluid pan, Throttle cables ripped up, Peices missing, Hoses split, EGR incomplete, PS fluid everywhere, Bad Oil smell, Random things grinded/cut off, CV axle boots not secured, Random peices of steel welded between something and nothing, Gaskets leaking, 2 jackoff mechanics involved, a driveway full of standing fluids, wrong fluids in the wrong places, disconected yet standing mechanical and electrical systems, A slew of plugs not pluged into their devices, cut wires, striped wires, Burnt wires, cut and improperly reconnected wires (that were connected to wrong wires) Missing componets, poorly placed aftermarket componets, sensors unlocated (and freehanging) signs of corrosion, Mechanical lines running in the wrong directions, and a partriach in a pair tree...

Oh and that was just the first 60 seconds of our meet n greet. There is indeed moar to this story. I just looked at the surface.

But He does have a verry nice HID setup.

We've alot of work ahead of us bro, But we'll get her up to par.

I'll call ya tommorow, And we'll get that tranny pan as promised. Remind me to compile a list of sh!t you're gunna be needing, and get ready to make a few deals with Alex and Steven, and Anyone else who may have what you need. Otherwise, I'll let you get in on some of my junkyard/"seedy parts shop" hookups.You remember what i told you about those places lol!

Sry 6g, This will not be a small project.

Malhar, i think you need to start a project thread. List every detail as you do it, so we have refference. Pictures are golden. this will help us in the future, as we'll have a history book to refer too. Plus give other members a place to help find your error, Opposed to individual issue thread hoping, and 40 PM explinations stating the same thing over and over.

This post has been edited by D-Man: Aug 21, 2010 - 9:32 PM

Whew... sounds like my 6th gen when i picked it up the first time. His sounds a bit worse. Hope you have alot of time on your hands the next few weeks.

FYL dude.
ive got a garage full of 2 dead celicas parts.. i may have some stuff for you

maybe i should take a drive over there and bring some cash. lmfao

Either grounds, or your battery connections/battery itself.

Haha wow that sucks but I like how you soften the blow by saying something good he has, well best of luck on the restoration, from the sound of things your gonna need it but be glad you have people to support you like D-Man

haha yea im pretty much screwed, but i am glad that dman came and took a look at the car...i was gonna buy some useless things to fix it my self but then he came and saved the day