6G Celicas Forums

How do you install LED lights inside the car like at the dome and the light in the trunck... for the parking lights also;what kind of wiring do you need to do to install these LED?

I hate to be the devil and I know your new to the site, but if you're going to post multiple question, try to keep them contained into one thread.
Also, the search button works wonderss lol

I think they sell some special LED's that will fit up in the dome, but I just used a flexible LED strip from walmart, and stuffed it up in there You have to obviously take it down and apart to find the wires that power. There is always a "hot" wire up there, and you have to find the ground that opens when the door is opened and closed. I can look at what I did tomorrow, but with a test light you will be fine

And as far as other lights thats all up to you, easiest is to run from the stereo power, but you can run it from anywhere, like with to come on with the lights, or to any switch of ur own. I have 5 different switches, and wiring if you have a very general knowledge is not hard . I guess i should tell you to unhook the battery when you do any work like this as its safer... but i never do

Heres some pics of all my LED's!

DOME-




Interior with LEDs in handles and vents-











Dont have pics of the LED's under the seats and dash but they are easy to install

If you have any questions ask i have made all the mistakes in the world i can help you avoid them
....oh and search

This post has been edited by mgnt232: Aug 24, 2010 - 9:33 PM

http://store.garage1217.com/


Buy the 194/168 high output bulbs for your cluster. You need three.

Buy the flagship domelight kit. You need two

The trunk is a festoon. If you were to look in the stickies and utilize this site's handy search function the bulb numbers will be found and all of your questions would be answered.

How's that done?