6G Celicas Forums

I have a SunPro water temp gauge and the temperature sender is too big to fit in the thermostat housing, so does anyone know an alternative place to put it? And if not, is there anywhere to put it to be an oil temp gauge?

im not sure of the brand but i was looking around and found a universal insert that you put in between your radiator hose and engine and it has adapters to fit pretty much any water temp gauge just look it up on yahoo... ill check for you 2maro man ...

I've seen that on the internet before too, In fact when I was trying to install the other gauge I was wishing I had it. I took that other gauge back already so it'd be great if you found what brand it was

Glowshift makes the coupler things I was looking into doing it for mine, just never got them. If you do it, you should do a little write up while you go along, so people in the future can know exactly what to do
►Water Temp Link◄

►Oil Pressure Link◄

The site also has alot of info, GL

Awesome. I'll probably work on it this weekend, I'll write up some instructions and I'll take some pics too.

problem with in the hose is you create more potential leaks and if you use the hose the t-stat is on you'll never get a real read of engine temp. better to thread an electric sender into somewhere on the block or head where there is coolant.

buddy club makes them. their website is www.buddyclub.us its in the products section in the racing spec series sub section.


haven't dealt with these guys, was just a place the came up under google images of the part.
https://www.jhpusa.com/store/pc/viewPrd.asp...;idcategory=609