6G Celicas Forums

Both of my low beam went out , i was thinking its the fuse because theres no way both will go bad at the same time . Fuses are all good . any idea what might be the problem?

This post has been edited by rheyx: Nov 16, 2010 - 4:55 PM

Maybe a wire or something got loose?

it wouldn't be the fuse, try replacing the relay in the engine bay

i tried pulling out the relay and both high and low went out , is it possible that only the low beam part is bad? if relay will go bad both high and low should go bad right? theres only one relay for the high and low right?

This post has been edited by rheyx: Nov 16, 2010 - 7:56 PM

I check the wire and they are all good

Here's the trouble shooting guide from the Toyota Factory Manual, but mine only covers US & Canada. The codes to the right of the trouble shoot guide show a detailed breakdown of the system if you need further detail. It sounds like the control switch from your description.

wow very useful, ill check on that.

Check the bulbs. Don't overlook something that simple before you go prodding around with circuits

Yes sir i did .. but its impossible to have 2 bulbs goin bad at the same time.

Lets not say impossible, rare yeah. But usually two lights going at once, start with their most common point and go backwards.