6G Celicas Forums

Welcome Guest ( Log In | Register )

16 Pages V  « < 2 3 4 5 6 > »   
Reply to this topicStart new topic
> Mak5603's Project, Dual tip exhaust and splitters on!
post Nov 12, 2010 - 7:48 PM
+Quote Post
4-eyed-freek



Enthusiast
****
Joined Apr 17, '10
From U.P. michigan GO STATE
Currently Offline

Reputation: 3 (100%)




times 2 ^ ^.. thats awsome. love them gt 4 calipers


--------------------
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.

Celica: The name is derived from the Spanish word for "heavenly" or "celestial".
Back-2-Back July COTM 15&16
post Nov 12, 2010 - 11:19 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




QUOTE (4-eyed-freek @ Nov 12, 2010 - 8:48 PM) *
times 2 ^ ^.. thats awsome. love them gt 4 calipers


Thank you, they're LS400 calipers though, lol tongue.gif GT4 rotors.


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Dec 8, 2010 - 2:42 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




Hit 200,000 miles on the way to the annual Northwest Toy Run meet last weekend. I have a few pictures as well but they are still on the camera, will upload later. Also purchased some more items for my swap biggrin.gif .


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Dec 9, 2010 - 12:16 PM
+Quote Post
4-eyed-freek



Enthusiast
****
Joined Apr 17, '10
From U.P. michigan GO STATE
Currently Offline

Reputation: 3 (100%)




only 100,ooo more and you can join me in the 300,000 club hahah


--------------------
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.

Celica: The name is derived from the Spanish word for "heavenly" or "celestial".
Back-2-Back July COTM 15&16
post Dec 9, 2010 - 2:12 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




^^ hehe, only on the chassis. Engine won't happen, I got a 19k mile 3s on the way that is going in as soon as it's ready.


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Dec 13, 2010 - 2:26 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




Ordered some more front end greatness today! Hope they come soon. biggrin.gif


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Dec 13, 2010 - 5:15 PM
+Quote Post
delusionz



Enthusiast
*****
Joined Feb 11, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




i wanna see the brakes installed!!!

what do u have to do to make it work? does it line up with the celica brakes? do you have to drill out threads or make spacers or what?

or is the problem that the calipers wont clear ur wheel spokes tongue.gif


--------------------
Mike W
1996 Toyota Celica ST205 GT-FOUR
GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC
269awhp / 273ft-lbs
post Dec 14, 2010 - 2:45 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




QUOTE (delusionz @ Dec 13, 2010 - 5:15 PM) *
i wanna see the brakes installed!!!

what do u have to do to make it work? does it line up with the celica brakes? do you have to drill out threads or make spacers or what?

or is the problem that the calipers wont clear ur wheel spokes tongue.gif


I can't wait for the brakes as well! Just have to wait until after winter due to the fact the calipers wont clear my stockies with snow tires on them tongue.gif


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Dec 14, 2010 - 7:42 PM
+Quote Post
lilguy

Enthusiast
*
Joined Aug 20, '10
From South Australia
Currently Offline

Reputation: 0 (0%)




Dude, Beautiful. that's all I'm going to say about this car. Keep it up
post Dec 15, 2010 - 2:24 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




QUOTE (lilguy @ Dec 14, 2010 - 8:42 PM) *
Dude, Beautiful. that's all I'm going to say about this car. Keep it up


Thanks buddy, thats the plan is to keep it up. Got some projectors on the way biggrin.gif


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Dec 15, 2010 - 11:44 PM
+Quote Post
lilguy

Enthusiast
*
Joined Aug 20, '10
From South Australia
Currently Offline

Reputation: 0 (0%)




I vote for a guide (pics) of removing the calipers what paint type you used and reinstalling smile.gif for the not so mechanical hahaha
post Dec 17, 2010 - 1:46 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




I don't have pictures of the whole removal process and it's too cold to go outside and do it all right now, but the paint kit that I used for all of the calipers that I've painted is this one:



I like this stuff A LOT more than spray paint personally. You start off by spraying it with the included caliper cleaner, get an old toothbrush or something and really clean it off. Tape off any part you dont want paint on (pistons, bleeder things [for lack of technical term], etc.). Shake/stir paint, and begin aplying to the calipers with the brush. I personally go out and buy another brush when I use this kit as the included brush is awful and the bristles fall out extremely easily and end up trying to dry into your wet paint. Anyways, just put down a layer and it will look REALLY BAD with only one layer, don't stress, just let it dry and add another layer, and repeat until it's your desired thickness and color.

Again, I like this paint because it has ceramic in it and is very resistant to heat, brake dust, fading, chipping, etc. They are really easy to clean with this paint on as well, it coats them very nice. Many people who use spray paint end up having to repaint their calipers every couple years because of the fading, chipping, etc. So far I've never had to repaint my calipers and they still look great up close, imo.

Hope this helps you out man. smile.gif


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Dec 18, 2010 - 6:40 PM
+Quote Post
lilguy

Enthusiast
*
Joined Aug 20, '10
From South Australia
Currently Offline

Reputation: 0 (0%)




good stuff thanks. have to look up removal of them now biggrin.gif ta
post Dec 19, 2010 - 1:11 AM
+Quote Post
eboz74

Enthusiast
**
Joined Dec 14, '10
From Lansing MI
Currently Offline

Reputation: 1 (100%)




QUOTE (mak5603 @ Dec 17, 2010 - 2:46 PM) *
I don't have pictures of the whole removal process and it's too cold to go outside and do it all right now, but the paint kit that I used for all of the calipers that I've painted is this one:



I like this stuff A LOT more than spray paint personally. You start off by spraying it with the included caliper cleaner, get an old toothbrush or something and really clean it off. Tape off any part you dont want paint on (pistons, bleeder things [for lack of technical term], etc.). Shake/stir paint, and begin aplying to the calipers with the brush. I personally go out and buy another brush when I use this kit as the included brush is awful and the bristles fall out extremely easily and end up trying to dry into your wet paint. Anyways, just put down a layer and it will look REALLY BAD with only one layer, don't stress, just let it dry and add another layer, and repeat until it's your desired thickness and color.

Again, I like this paint because it has ceramic in it and is very resistant to heat, brake dust, fading, chipping, etc. They are really easy to clean with this paint on as well, it coats them very nice. Many people who use spray paint end up having to repaint their calipers every couple years because of the fading, chipping, etc. So far I've never had to repaint my calipers and they still look great up close, imo.

Hope this helps you out man. smile.gif

i painted mine with the same brand
post Dec 19, 2010 - 9:27 AM
+Quote Post
lilguy

Enthusiast
*
Joined Aug 20, '10
From South Australia
Currently Offline

Reputation: 0 (0%)




QUOTE (mak5603 @ Sep 13, 2010 - 3:52 PM) *
Like I mentioned earlier, my car is waiting on the arrival of a 3rd gen 3S-GTE motor set from _Jim_. I am extremely excited to start the swap. These are not mounted yet, but here will be what my gauge setup will look like. I also purchased an Apexi AFC NEO to be put where the cigarette lighter currently is.



Hey curious where did you grab that guage holder from? and can you get it to suit RHD Celicas?

ta

This post has been edited by lilguy: Dec 19, 2010 - 9:29 AM
post Dec 21, 2010 - 3:36 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




QUOTE (lilguy @ Dec 19, 2010 - 9:27 AM) *
Hey curious where did you grab that guage holder from? and can you get it to suit RHD Celicas?

ta


I bought the DCW LHD one, but it looks like RT-P has some RHD ones, heres the ebay link and the 6gc.net link.

http://shop.ebay.co.uk/rt-performance-uk/m...p;_trksid=p3686

http://www.6gc.net/forums/index.php?showtopic=76829


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Jan 5, 2011 - 12:30 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




Hopefully buying a new project today! biggrin.gif











Now to sell the Alltrac frown.gif


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Jan 5, 2011 - 1:02 PM
+Quote Post
alltracst185

Enthusiast
*
Joined Mar 1, '09
From fitchburg, ma
Currently Offline

Reputation: 0 (0%)




QUOTE (mak5603 @ Jan 5, 2011 - 1:30 PM) *
Hopefully buying a new project today! biggrin.gif











Now to sell the Alltrac frown.gif

Dude don't sell the All-trac! build it biggrin.gif I promise you that you won't drive another car like it with a few mods wink.gif Nic GTFOUR clone by the way!
post Jan 5, 2011 - 1:25 PM
+Quote Post
mak5603



Enthusiast
****
Joined Oct 20, '08
From Seattle, WA
Currently Offline

Reputation: 5 (100%)




QUOTE (alltracst185 @ Jan 5, 2011 - 2:02 PM) *
Dude don't sell the All-trac! build it biggrin.gif I promise you that you won't drive another car like it with a few mods wink.gif Nic GTFOUR clone by the way!


Man you don't even know how bad I want to keep it but I've thought about it and this is what I came up with..

I am at this point 100% committed to keeping my 95 for life and converting it to AWD. With that being said I would have essentially two extremely similar cars, just one with more potential (the one with the 3rd gen) and better looks.

I have done some light mods here and there and really do love the car but it needs someone who doesn't have another much more costly and time consuming project going on at the same time, haha. It runs and drives but has literally been chilling in my garage so long it recently filed for a change in color code to: Dust 202, lol. Just doesn't get the attention it deserves because when it comes down to it, I just don't have that much use for it.

Final reason for the sell will have to be the fact I just want a rear wheel drive car... either E30 325is or AE86 GTS Coupe that i can beat on the drift track.


--------------------
2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE
post Jan 5, 2011 - 6:14 PM
+Quote Post
alltracst185

Enthusiast
*
Joined Mar 1, '09
From fitchburg, ma
Currently Offline

Reputation: 0 (0%)




Lexus IS300? They are afordable now. I love mine!

16 Pages V  « < 2 3 4 5 6 > » 
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 5:22 PM