 question on a short shifter, short shifter creation |
  |
 Jan 12, 2011 - 7:56 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
QUOTE (95CelicaST @ Jan 12, 2011 - 4:49 PM)  Guys, it isn't hard. Go into your engine bay, pop the shift cables off the transmission one at a time (so you don't somehow find a way to cross them), gut the bushing in the cable end, install brass bushing and the c-clip, and put it back on the transmission. there is your how-to. Really? That easy? Thanks a lot -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Jan 13, 2011 - 2:06 AM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Yes, it really is that easy. If you've never seen the bushings, the job seems daunting. But once you've located exactly where the shift cables attach to the transmission and you've seen how simply it's all put together, you'll realize you really have nothing to worry about. Pull a tiny pin, remove the old rubber bushing (assuming it doesn't fall out on its own due to age,) put the new bushing in, reattach the shift cable, put the pin back in. Done. The hardest part about the whole job is remembering where you put the tiny pins.
Edit: OP, I found a couple of posts that will be of benefit to you. QUOTE (bootslimo @ Feb 29, 2008 - 10:21 PM) There is a difference between a short shifter and a short throw shifter, if you want a short shift cut your shaft and reweld it. If you want a short throw weld any type of extension to the underside of the shifter. The longer the extension the shorter the throw. QUOTE (goferris @ Mar 13, 2008 - 2:01 AM) the short throw won't look all that much shorter because you have to put the assembly on risers so you don't hit on the bottom. it's designed shorten the throw, not necessarily the height of the shifter. if you want a short throw/short shift stick, get a cheap ebay one, cut a bit off the top portion then weld it back together. now you have a shorter throw (distance between gears when shifting) and the shift stick now looks shorter.
all i can say is i love mine and most people who have been in my car have made comments about it. best 30 bucks spent IMO. This post has been edited by richee3: Jan 13, 2011 - 2:14 AM -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Jan 13, 2011 - 3:44 AM
|
|
 Enthusiast Joined Jan 7, '11 From Mena, AR Currently Offline Reputation: 0 (0%) |
QUOTE (richee3 @ Jan 13, 2011 - 2:06 AM) Yes, it really is that easy. If you've never seen the bushings, the job seems daunting. But once you've located exactly where the shift cables attach to the transmission and you've seen how simply it's all put together, you'll realize you really have nothing to worry about. Pull a tiny pin, remove the old rubber bushing (assuming it doesn't fall out on its own due to age,) put the new bushing in, reattach the shift cable, put the pin back in. Done. The hardest part about the whole job is remembering where you put the tiny pins. Edit: OP, I found a couple of posts that will be of benefit to you. QUOTE (bootslimo @ Feb 29, 2008 - 10:21 PM) There is a difference between a short shifter and a short throw shifter, if you want a short shift cut your shaft and reweld it. If you want a short throw weld any type of extension to the underside of the shifter. The longer the extension the shorter the throw. QUOTE (goferris @ Mar 13, 2008 - 2:01 AM) the short throw won't look all that much shorter because you have to put the assembly on risers so you don't hit on the bottom. it's designed shorten the throw, not necessarily the height of the shifter. if you want a short throw/short shift stick, get a cheap ebay one, cut a bit off the top portion then weld it back together. now you have a shorter throw (distance between gears when shifting) and the shift stick now looks shorter. all i can say is i love mine and most people who have been in my car have made comments about it. best 30 bucks spent IMO. thanks richee. are you saying you have a short shifter, a short throw shifter, or a short throw short shifter? and couldnt i just take the stock rod, lengthen the bottom portion with a chunk i cut out of the top portion, and call it a short throw short shifter? This post has been edited by playboymma: Jan 13, 2011 - 3:47 AM -------------------- I went full retard once, too. Its OK.
|
|
Jan 13, 2011 - 11:29 AM
|
|
 Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
You could, but honestly just buy a 7th gen short shifter from ebay and install that. If you hack the stock one then there will be no way to go back unless you buy another shifter.
Ebay short shifter + brass shifter base bushings + brass shift cable bushings = great shift feel. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
|
Jan 13, 2011 - 11:40 AM
|
|
 Enthusiast Joined Apr 24, '07 From CA Currently Offline Reputation: 1 (100%) |
Where does one get brass shifter cable bushings?
-------------------- QUOTE what hes saying is if you put blue lights in you car youll lose hp. |
|
Jan 13, 2011 - 12:29 PM
|
|
|
Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
I got mine from twosrus.com, which are from speed source.
You can also get them on ebay cheaper, but I think it's better to spend a little more and help the toyota community. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
I'm not really an asshole, but I play one on the internet. **** Photobucket |
|
Jan 13, 2011 - 1:24 PM
|
|
|
Enthusiast Joined Jan 7, '11 From Mena, AR Currently Offline Reputation: 0 (0%) |
QUOTE (95CelicaST @ Jan 13, 2011 - 12:29 PM) You could, but honestly just buy a 7th gen short shifter from ebay and install that. If you hack the stock one then there will be no way to go back unless you buy another shifter. Ebay short shifter + brass shifter base bushings + brass shift cable bushings = great shift feel. with all due respect, i give myself more credit at cutting/welding than worrying about messing up SO BAD that i cant even fix the original. plus, i literally have NO money to buy even the cheapest ebay one. cuz right now putting that thirty dollars in the tank is more important since i physically cannot fabricate a tank of gas. i can, however, fabricate exactly what they have for sale. -------------------- I went full retard once, too. Its OK.
|
|
Jan 13, 2011 - 1:41 PM
|
|
|
Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Are you saying you haven't figured out how to fabricate gasoline yet???
Get up on my level. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
I'm not really an asshole, but I play one on the internet. **** Photobucket |
|
Jan 13, 2011 - 2:25 PM
|
|
|
Enthusiast Joined Jan 7, '11 From Mena, AR Currently Offline Reputation: 0 (0%) |
QUOTE (95CelicaST @ Jan 13, 2011 - 2:41 PM) Are you saying you haven't figured out how to fabricate gasoline yet??? Get up on my level. indeed. teach me, oh great jedi master, the ways of creating gasoline, so that i may one day have some money left in my pocket in the days leading up to payday -------------------- I went full retard once, too. Its OK.
|
|
Jan 13, 2011 - 3:14 PM
|
|
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (playboymma @ Jan 13, 2011 - 1:25 PM) QUOTE (95CelicaST @ Jan 13, 2011 - 2:41 PM) Are you saying you haven't figured out how to fabricate gasoline yet??? Get up on my level. indeed. teach me, oh great jedi master, the ways of creating gasoline, so that i may one day have some money left in my pocket in the days leading up to payday My oh my, the sarcasm is so palpable that I can taste it. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Jan 13, 2011 - 5:01 PM
|
|
|
Enthusiast Joined Jan 7, '11 From Mena, AR Currently Offline Reputation: 0 (0%) |
QUOTE (HectortheRican @ Jan 13, 2011 - 3:14 PM) QUOTE (playboymma @ Jan 13, 2011 - 1:25 PM) QUOTE (95CelicaST @ Jan 13, 2011 - 2:41 PM) Are you saying you haven't figured out how to fabricate gasoline yet??? Get up on my level. indeed. teach me, oh great jedi master, the ways of creating gasoline, so that i may one day have some money left in my pocket in the days leading up to payday My oh my, the sarcasm is so palpable that I can taste it. i try. ill let you guys know how the hand made short throw comes along -------------------- I went full retard once, too. Its OK.
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 6:42 PM |