 Engine Mounts, Can't Find the right one for the rear |
  |
 Jan 28, 2011 - 1:16 AM
|
 
|
|
Enthusiast  Joined Aug 28, '08 From Woolwich, Maine Currently Offline Reputation: 0 (0%)  |
back ground, last summer i replaced the front and rear motor mounts. The front one went in without a problem, however the rear which was supposedly meant for the GT with MT didn't bolt in, the studs were too short. The store said that the mounts for automatic and manual transmissions may have been listed backwards. I ended up getting the listed for the automatic transmission. Near the beginning of december the engine started knocking around again, so i took a look and the mount has ripped straight down through the rubber. I know the mount is really made for the auto trans cause it has significantly less rubber, but it was the only one of the 2 that would bolt in. I got the mounts from CarQuest.
Has anyone else experienced this problem and does anyone know what auto parts store will have the rear motor mount with studs long enough to bolt in? This post has been edited by barterj: Jan 28, 2011 - 1:13 PM |
|
Jan 28, 2011 - 1:15 PM
|
|
|
Enthusiast Joined Aug 28, '08 From Woolwich, Maine Currently Offline Reputation: 0 (0%) |
Am I really the only person that has bought a new mount that the studs were too short? the reason I ask where someone may have gotten one that bolts in is that a lot of auto parts stores get their parts from the same places.
|
|
Jan 28, 2011 - 8:09 PM
|
|
 Enthusiast Joined Jan 25, '06 From MN Currently Offline Reputation: 19 (100%) |
I bought mines from the dealer genuine toyota oem mounts, the oem mounts cost only about $20 or so more worth it imo..
-------------------- "To Protect And To Serve The Wealthy" -POLICE
|
|
Jan 28, 2011 - 8:23 PM
|
|
 Enthusiast Joined Mar 22, '07 From Houston, TX Currently Offline Reputation: 4 (100%) |
yeah, go oem. always.
-------------------- QUOTE "And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH 1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED 1995 ST: SOLD @273k miles, Auto, all power, CarPC, White 1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810 1994 Lexus LS400: This is my new DD |
|
Jan 28, 2011 - 8:48 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
yup, oem is the way to go, i have an old one i believe. not sure, ill look.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Jan 29, 2011 - 12:56 PM
|
|
|
Enthusiast Joined Aug 28, '08 From Woolwich, Maine Currently Offline Reputation: 0 (0%) |
I usually go CarQuest for parts because my father has a garage account there, but I guess not for motor mounts anymore, thanks for the advice
|
|
Jan 29, 2011 - 1:10 PM
|
|
|
Enthusiast Joined Aug 27, '10 From 60152 Currently Offline Reputation: 1 (100%) |
Urethane mounts are the best in my professional experience. Thats what i use on my cars and I have never had a problem.
Im not sure how makes them for the Celica but I will look and repost something. Jake The Mechanic |
|
Jan 29, 2011 - 1:16 PM
|
|
|
Enthusiast Joined Aug 27, '10 From 60152 Currently Offline Reputation: 1 (100%) |
http://www.6gc.net/forums/index.php?showtopic=39891
Someone on the forum already did it take a look these are just inserts but I thank you will like it. Im going to get some in the spring seeing as i just put a new motor in my 94 st from STAMBO |
|
Jan 31, 2011 - 6:44 AM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
manual mounts have more legs than the automatic mounts, thats your first key to distinguish what you have. automatic mounts I've used before at one point but switched to manual later after my swap. they both fit but manual mounts appear to be more durable with the extra legs. Much easier to go with OEM catalog because a lot of times aftermarket replacement catalogs are fond of incorrect part numbers, or universal parts used for other cars. Its easy to notice what is different between OEM and aftermarket stuff, things are not shaped the same, too long or too short, etc.
This post has been edited by trdproven: Jan 31, 2011 - 6:48 AM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
Jan 31, 2011 - 1:29 PM
|
|
|
Enthusiast Joined Mar 22, '07 From Houston, TX Currently Offline Reputation: 4 (100%) |
oem = designed for application
aftermarket = compatible(mostly) with application oem is really the best way to go. -------------------- QUOTE "And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH 1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED 1995 ST: SOLD @273k miles, Auto, all power, CarPC, White 1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810 1994 Lexus LS400: This is my new DD |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 11:23 AM |