6G Celicas Forums

Quite the show sir.

You're making some really nice progress. How much longer until the 3S...rough estimate?

Keep up the good work.

I'm hoping to buy it around Christmas or sometime after that. It probably won't happen though. I keep finding good deals on stuff and buying that instead. Like $141 for the JDM tails, just so I didn't have to pay $200 later. And I just bought bseaman's DCW gauge pod because I probably won't get a chance at another one. So unless I find a really good deal on a head unit, the engine is the next expense. $2,200, here I come.

What kind of head unit, i have a friend selling a nice double din right now for 275 AVH-P4000. Its pretty nice. I just bought his new one he didnt like for 300, AVIC-D3. And i have a friend who owns a audio shop so i can get a big discount on alot of other models and other audio things.

The one he's selling
http://www.pioneerelectronics.com/PUSA/Pro...rs/AVH-P4000DVD

This post has been edited by JuMPiiN: Aug 11, 2010 - 12:10 AM

dude. 60 shipped and mine is yours.

it's not the best but it does the job.

This post has been edited by 97celiman: Aug 11, 2010 - 1:33 AM

Guys! Stop showing him those good deals...I want him to purchase that 3S-GTE and get this thing running.

Just kidding.

I like your goal Dan and hope you make it. I'm saving for an engine now too - I just have to encourage myself I can do a swap and then decide N/A or boosted.

This post has been edited by Keiri: Aug 11, 2010 - 9:24 AM

are we swap racing? hahah

its kinda good though not getting the engine in there for a while, gives you a chance to really get into cleaning and making sure everything thats a pain to get to with the motor in is workin mint. Hell, you could make that thing look brand new again!

you like being covered in grease? thats scary. Well good luck with the swap, its fun when you DIY, i love driving my vert.

Sadly the beams is coming out soon for maintenance....

oh and do you want a toms lip?

Lol I have no extra money, guys. Not buying anything until after I get the motor. I did, however, pick something up a few days ago.

What could it be?


It's JDM BUBBLE WRAP!!!!!


So... What happens if I take this JDM bubble wrap and combine with my JDM cardboard box? There's an explosion of JDM... It's like JDM forced induction.


Here's a videos of it in action!!!! 814 RWHP. Clicky.













































. . . Or maybe it was a DCW gauge pod wrapped in bubble wrap.



Holes have been drilled in the firewall, so now the 4 gauge battery wire and all wires for the gauges are run properly. No pictures of that because a hole in a firewall is a pretty boring thing.

This post has been edited by richee3: Aug 17, 2010 - 3:11 PM

Go go progress!

I personally hate axel grease...it just gets everywhere. Specially when a boot is blown and you drive it for a bit...such a pain to clean up.

those dcw's sure look awesome, way better than pillar pods imo.

keep us updated!

My apologies for the delay, but I'm finally able to pick this thread back up. First things first, progress died down due to employment. First, work slowed down a lot. Then I lost a job and was sent out looking for another. When I got another job, profit margins were low. When my bank account finally started to bounce back, a bunch of stupid crap got in the way. Samir and Ferdi know what I'm talking about. I finally got that all arranged and went unemployed for another month. But finally, as of today, I can say that I've got another job. I fully expect to have the car running or at least close to it within two months. Body work finished by the end of summer.

Now, for the progress I've silently made without updating this thread. I gave the JDM tails and TRD splitters to the girlfriend for Christmas. Merry Christmas, Brigette. I've decided to stay naturally aspirated, so I sold the DCW gauge pod to bloodMoney. I've cleaned the engine bay some more, did a little more cleaning on the interior of the car, and added more sound insulation. Also, for those of you who don't go in chat often, I've decided which engine I will be buying and swapping. I've not told many people what it is, but it'll be the first one swapped in a 6th gen. I'll update again when I have the motor.

Special thanks go out to Turnip for going out of his way to give me some information that will help me out a lot with my swap, and Samir for sending me some parts. Thanks guys

would you kindly post a pic of the places you drilled on the top of the dash and how you're mounting them on pls

This post has been edited by chacha: Feb 3, 2011 - 11:02 PM

I think that I've decided to go a different route as well Daniel. Needing to keep OBDII presents a problem when swapping to any 3s.....

But I need to get a job first.

I do not know what the rules are where you live but in mass. after 15years you only need to pass a safety check and no emissions.

Good luck as always pal.

YESSSS

In IL, if the car is 96 and newer, you must get the car tested every 3 years. They don't do visual checks though, they just plug in the OBD port to make sure there are no error codes.

I ordered the clutch last Tuesday and I finally got the motivation to actually unload the motor from the bed of my truck today. I have already looked it over, but I felt like taking some pictures to show you guys where I stand on this swap.

Factory header FTW.


Cut alternator plug... Lame.


Can't check my oil? Denied!


Melted plug- looks like I'll be trying to find a new one. Right after I figure out what this plug is even for.


The throttle body seriously needs to be cleaned.


Slight oil leak- I'm debating whether I want to buy a new gasket or just let it leak.




JDM GLOVE!!!


For the melted plug, I'm going to go shopping in a junkyard soon to see if I can't steal one from a Camry or something. Right now, the biggest problem that I see is that my engine did not come with the section of the fuse box that I had to take out when I pulled my 5S out, and I already got rid of my 5S. I also can't find where on the wiring harness that the fusebox would even come from. I just really need to pull everything apart and get a good look at it. I have the money to order all the parts I need, but for some reason, I don't feel like spending it. So I'm either going to force myself to buy everything I need or just wait a few weeks and spread my expenses out.