PLEASE CLOSE THIS THREAD THANK YOU!, Car has been sold to my local Junkyard |
PLEASE CLOSE THIS THREAD THANK YOU!, Car has been sold to my local Junkyard |
Feb 6, 2011 - 5:40 AM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
Well I currently got in an accident about 2 months ago on Dec. 13 2010. I'm parting out this car as I have recently bought erahmans 99 gt celica.
The engine has 133,000 miles and is in great running condition. I always beat the hell out of it and never did me wrong. I have replaced alot of maintenance parts on it within the past 15,000 miles. Here is a list of the engine maintenance parts that were replaced with the mileage I have accumulated on them: -Both NTK Post and Pre Oxygen Sensors 20,000 used miles, both for $50 -New PCV Valve 10,000 miles, free -New Toyota OEM Fuel Filter 10,000 miles. $10 -C52 Transmission refilled with 2.7 liters of Penzoil Syncromesh about 5,000 miles ago and has smooth shifting. -New OEM Thermostat 6,000 miles $10 -Front Brake Pads and Rotors purchased off ebay have 17,000 miles on them. Good stopping power no joke Pads are about 40% worn down as seen in pics. I also bought new OEM brake Shims for both sides. -Interior is in Excellent Condition Pretty Much Perfect. Airbags did deploy when I got in the accident. Dash, front and rear seats are all in great condition. -Ebay 7A-FE header is wrapped and i also have a 94-95 obd1 stock exhaust header with custom down pipe. The ebay header and stock header with custom down pipe are exactly the same length. When I bought my magnaflow exhaust system from a local exhaust shop I still had my stock header and stock front downpipe, so the exhaust shop just did a custom cat back exhaust system. The custom downpipe that fits the stock header has a 2.25 inch piping at the end. - Eibach Sportline Springs used with roughly 15,000 miles, but most springs come with a million mile warranty. I will need to trade someone for there stock springs once you buy my Eibach Sportline Springs -7th Gen Celica GT-S wheels. Has two new 205/50R16 Dunlop Direzza DZ101 Ultra Hi Performance Summer Tires with about 300 miles on them. You will need to buy another 2 Dunlop Direzza dz101 for the fronts as the current tires on there are some worn falken fk452 with barely any tread on them. $300 I'll be taking pics of the rims on this upcoming saturday when I have plenty of sunlight outside!!! so stay tuned they are in great condition -Custom made Wood that fits in the trunk so you can use a 185/70R14 size spare in there and you will have a flat surface to place stuff in the trunk. $40 comes with -Those looking for auto to manual swap on their slower auto 7afe engines $400 for Everything including used Exedy Stage 1 Clutch Kit with 18,000 miles I have a wide variety of tools in my garage and I don't work on Saturday and Sunday. So if you guys need help taking off any parts I can assist you on the weekends. I have enough tools here in my garage to do an engine swap and then some just so you get an idea. I have taken great care of my celica until the accident always making sure everything was in working order and always staying on top of maintenance. Things not for sale: Pioneer Head unit w/ Ipod adapter, Catalytic Back Exhaust System, 94-95 Two Post Hatchback Trunk including the spoiler and black plastics that sit under the engine bay and under the fenders. None of the front panels are available as well (hood and both fenders are gone). Another thing is that I do not want to part out any suspension parts, as whenever I decide to give my car to the junkyard the car will need to have working suspension so they can steer the thing onto the tow truck. I think I've covered it all here are the pics!!! throw me some offers. This post has been edited by BonzaiCelica: Apr 16, 2011 - 12:23 AM -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 6, 2011 - 12:17 PM |
|
Enthusiast Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
ill take the trunk shocks, ntk o2 sensor, dash cover...
**just found out...your post o2 sensor is different from the ST compared to the GT... ill just take the pre cat sensor. This post has been edited by chacha: Feb 6, 2011 - 12:34 PM |
Feb 6, 2011 - 1:12 PM |
|
Enthusiast Joined Feb 22, '04 From USA Currently Offline Reputation: 3 (100%) |
you wouldnt happen to have the 2 litle pieces that the hatch cover clips into would you?
http://s1137.photobucket.com/albums/n507/bwestfall85/ |
Feb 6, 2011 - 4:25 PM |
|
Enthusiast Joined Jul 2, '08 From SoCal Currently Offline Reputation: 6 (100%) |
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and i'm trying to see if i can get a engine for a decent price.
|
Feb 6, 2011 - 7:29 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and I'm trying to see if i can get a engine for a decent price. yo Chris I actually tried calling you today as I remember you telling me how you wanted a manual tranny real badly. I'd be willing to sell you everything you need for the swap for $600. I just thought about it you have OBD II and my engine is OBD I. From reading dmv regulations and all that bs is that you can all only swap en engine from a newer car or the same year but nothing older, so that's totally on you. I've never done an engine swap but I could help you take everything out since I have tools at my place. oh ya man, I got a great deal on the new celica, its way better than my slow 7afe, but I enjoyed everything about my slow celica while it lasted -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 6, 2011 - 9:18 PM |
|
Enthusiast Joined Mar 10, '08 From Socal, OC Currently Offline Reputation: 7 (100%) |
how much for the dash design cloth cover?!
|
Feb 6, 2011 - 9:53 PM |
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
How much for the strips that go between the sides of the front bumper and the fenders? The strip with the 3 bolts sticking out of them. How much for both of them plus the 6 bolts?
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Feb 6, 2011 - 10:28 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
how much for the dash design cloth cover?! $40 local pickup i bought this thing for $60 from dealership. pending sale though so I'll let you know if it doesn't go through. -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 6, 2011 - 10:32 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
you wouldnt happen to have the 2 litle pieces that the hatch cover clips into would you? http://s1137.photobucket.com/albums/n507/bwestfall85/ I only have the one on the left side as the one on the right is broken off. I think I remember seeing a spare one somewhere around my room or in the garage. I might have thrown it away, so if I find em it I'll let you know. -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 7, 2011 - 12:22 AM |
|
Enthusiast Joined Jul 2, '08 From SoCal Currently Offline Reputation: 6 (100%) |
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and I'm trying to see if i can get a engine for a decent price. yo Chris I actually tried calling you today as I remember you telling me how you wanted a manual tranny real badly. I'd be willing to sell you everything you need for the swap for $600. I just thought about it you have OBD II and my engine is OBD I. From reading dmv regulations and all that bs is that you can all only swap en engine from a newer car or the same year but nothing older, so that's totally on you. I've never done an engine swap but I could help you take everything out since I have tools at my place. oh ya man, I got a great deal on the new celica, its way better than my slow 7afe, but I enjoyed everything about my slow celica while it lasted $600 for just the engine or for engine and trans? i figure that i could use your bottom end and my top end with my current wiring and ecu to make things work. not sure if there is a huge difference with sensors, but i'll have to research. just trying to weigh out my options. i've even contemplated selling my car for $1000 and moving onto a subaru. |
Feb 7, 2011 - 1:50 AM |
|
Enthusiast Joined Jan 13, '11 From vandenberg afb, ca Currently Offline Reputation: 0 (0%) |
How much for the kgb and springs? What's the drop on it?
|
Feb 7, 2011 - 2:37 AM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and I'm trying to see if i can get a engine for a decent price. yo Chris I actually tried calling you today as I remember you telling me how you wanted a manual tranny real badly. I'd be willing to sell you everything you need for the swap for $600. I just thought about it you have OBD II and my engine is OBD I. From reading dmv regulations and all that bs is that you can all only swap en engine from a newer car or the same year but nothing older, so that's totally on you. I've never done an engine swap but I could help you take everything out since I have tools at my place. oh ya man, I got a great deal on the new celica, its way better than my slow 7afe, but I enjoyed everything about my slow celica while it lasted $600 for just the engine or for engine and trans? i figure that i could use your bottom end and my top end with my current wiring and ecu to make things work. not sure if there is a huge difference with sensors, but i'll have to research. just trying to weigh out my options. i've even contemplated selling my car for $1000 and moving onto a subaru. ok ok. well if not I'll give it to you for $500. so just think about it -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 7, 2011 - 2:40 AM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
How much for the strips that go between the sides of the front bumper and the fenders? The strip with the 3 bolts sticking out of them. How much for both of them plus the 6 bolts? hmm what are you talking about the black plastics that are underneath the car?? you mind editing a photo with paint and pointing towards it with an arrow or find me a pic of it please. I'm clueless as to what your talking about. -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 7, 2011 - 2:58 AM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
How much for the kgb and springs? What's the drop on it? There is a pending sale on the KYB GR-2 Shocks. I will be selling the Eibach Sportline Springs for $140. These springs usually sell for atleast $200 and above. here is a wellknown site just so you get an idea of how much they are http://www.horsepowerfreaks.com/performanc...pension/Springs So it would be $165 with shipping included. The Drop on both the front is 1.5 inches. Here is a pic of how they looked on a 99 Celica GT. Might not be the greatest pics but it was a good drop. The tires on the silver celica are 205/50R16 and there is very minimal wheel gap as you can see. You can stick about 3 fingers in the back and 4 fingers in the front, that's the wheel gap from the fender to the top of the tire. http://www.6gc.net/forums/index.php?showto...mp;#entry860804 This post has been edited by BonzaiCelica: Feb 7, 2011 - 3:49 AM -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 7, 2011 - 3:39 AM |
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
How much for the strips that go between the sides of the front bumper and the fenders? The strip with the 3 bolts sticking out of them. How much for both of them plus the 6 bolts? hmm what are you talking about the black plastics that are underneath the car?? you mind editing a photo with paint and pointing towards it with an arrow or find me a pic of it please. I'm clueless as to what your talking about. On the top left, they're item #2. They're this pair of strips that go between the sides of the front bumper and the front-parts of the fenders. It's just a slim piece of plastic with 3 bolts coming out of them. There's one on each side. Do you understand what part I'm talking about now? -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Feb 7, 2011 - 10:05 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
Pending Sale on Trunk Lift Supports, Dashboard Cover, and KYB GR-2!!
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 8, 2011 - 12:02 AM |
|
Enthusiast Joined May 18, '10 From Omaha Currently Offline Reputation: 0 (0%) |
any chance you're selling the ac control part of the dash? if so, pm me please
|
Feb 8, 2011 - 11:52 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and I'm trying to see if i can get a engine for a decent price. yo Chris I actually tried calling you today as I remember you telling me how you wanted a manual tranny real badly. I'd be willing to sell you everything you need for the swap for $600. I just thought about it you have OBD II and my engine is OBD I. From reading dmv regulations and all that bs is that you can all only swap en engine from a newer car or the same year but nothing older, so that's totally on you. I've never done an engine swap but I could help you take everything out since I have tools at my place. oh ya man, I got a great deal on the new celica, its way better than my slow 7afe, but I enjoyed everything about my slow celica while it lasted $600 for just the engine or for engine and trans? i figure that i could use your bottom end and my top end with my current wiring and ecu to make things work. not sure if there is a huge difference with sensors, but i'll have to research. just trying to weigh out my options. i've even contemplated selling my car for $1000 and moving onto a subaru. you can take both the engine and transmission for $500!!! This post has been edited by BonzaiCelica: Feb 8, 2011 - 11:55 PM -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 9, 2011 - 12:10 AM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
yo Hector are you talking about this??
if not here is a pic of the front use paint or photobucket editor to point out what your talking about. if the first image that I posted wasnt what you were looking for. -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Feb 9, 2011 - 12:13 AM |
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
yo Hector are you talking about this?? See those three holes on the fender? The plastic strip goes behind them, the bolts come out, they go into the bumper, and you tighten a nut on the other side of the bumper. Sorry I wasn't specific in a picture, I just didn't know I could do that in photobucket lol -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Lo-Fi Version | Time is now: November 22nd, 2024 - 7:11 AM |