6G Celicas Forums

* Chrome door catch from Lexus'
* Chrome door handles from Avensis (with modding)
* Chrome gear gaitor garnish from Lexus

This post has been edited by BloodyStupidDavey: Oct 29, 2008 - 3:07 PM

so did anyone confirm about the strut bar.

x2 bump

d'oh, I TOTALLY forgot about this thread! I haven't drilled the holes still, but I'm telling you, length-wise, it's totally fine. I checked that a long time ago! Here's a link to the Tanabe Racing Development web site (the one on the Tanabe site is the "generic" photo, not the actual one I have)

Here's a picture that looks like the one I have:



What I've actually done with my strut bar is I sanded down the bracket thingies (end plates) through the paint down to the metal, roughed it up some, and filled in the holes with steel reinforced putty. I packed the putty in tightly (to eliminate air pockets) and smoothed it just outside of flush to the end plates to allow for shrinking when it set. After leaving it a few days, I sanded the putty down to be flush to the end plates, so all I have left to do is drill new holes and repaint the end plates.

This post has been edited by GriffGirl: Nov 11, 2008 - 1:23 PM

shimless buckets for the 2nd/3rd gen 3sgte's from the 1zz 7th gen engine

What about sunroofs? Any similarities between the Celica/Curren and corollas/ paseos/ coronas etc?

These listings before being stickied should be confirmed and then organized first.

97 solara starter... confirmed. been using one for my 5sfe for 3.5 years

This post has been edited by azian_advanced: Feb 12, 2009 - 6:52 PM

update...sorry for bringing up old thread...im going through replacing parts that are worn like the jet nose sprayer on the hood...cheaper but good or better performance parts... ALWAYS a big + !!

confirmation of a better list of interchangeable parts to the data would be nice; more order

This post has been edited by chacha: Feb 18, 2011 - 8:23 PM

I'll look over these if the people that helped add some of them can confirm with a picture of some sort (unless self-explanatory) or cite a reference perhaps?

The Pioneer headunit does work. The factor harness plugs in without any modification. I modified the radio face plate because I didn't want to modify the center trim piece. You need to cut aprox. 1/4 inch off of both sides of the unit.

Also, 1990-93 4 cyl. Accord CAI (two piece) works great with some minor modification.

I have a shift knob from a paseo..

Does anyone know if the trd shifter of a 7th gen fits?

yes the TRD shifter from a 7th gen will work, also from a tc, i believe that most toyota knobs are interchangeable

Yah any toyota knob will thread on....I haven't seen one that isn't the same yet...of at least a dozen different models

Are u sayin the shifter assembly fits? or just the knob

Front stabilizer links off a AE110 corolla-Perfect fit.

Im not sure if the entire assembly will swap in but hell even the shifter swaps over so the knob will definately

I'm thinking we keep this alive till... the end of the week? and then I'll be happy to go through it all and repost/reorganize to get it stickied. (organized by... part type? engine/suspension/etc...)

volvo jet nozzles? which one...i need a picture to verify

Front ABS sensors from 1991-96 Camry, I used one from a Camry to replace a bad sensor in my car, if needed I can try to get a pic to verify

Also e-brake hardware from 91-01 Camry, if you're cheap or in college like myself and the junkyard is your friend

headlight pigtails (high and low) from 1992-98 Pontiac Grand Am, well really any car that uses 9005 and 9006 head lamp bulbs, got mine from a grand am because the original ones had melted for a some reason

This post has been edited by barterj: Feb 23, 2011 - 12:07 AM