6G Celicas Forums

Welcome Guest ( Log In | Register )

3 Pages V  < 1 2 3 >  
Reply to this topicStart new topic
> No Spark
post Apr 17, 2011 - 11:18 PM
+Quote Post
Stambo



Enthusiast
****
Joined Apr 23, '08
From Muskego,Wi
Currently Offline

Reputation: 8 (100%)




if you can get ahold of some info from a manual there are specs on the resistance of the distributor for the coils. I just had to check the same thing on my 3s distributor.

Atleast now you know that it is a spark issue not something else. What year celica is it again? i could try to pull up some info for your from my work.


--------------------
2nd Gen 3s-gte.... It lives!

97celiman
"92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM"
post Apr 18, 2011 - 1:02 AM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




1994 5sfe. Yep, glad ive got that sorted but its strange, I wouldnt expect it to start at all, anytime if it had no spark but I can still roll start it most of the time
post Apr 20, 2011 - 8:07 PM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




Okaaaaaay...

Today took the car (after roll starting) to the shops and came back, no worries. Went to roll start again and it didnt start. Tried my luck at cranking and the car started. Put it into first and went to take off and the car died, no electrics worked, no cranking, NOTHING. Disconnected the battery for ten min and put terminals back on, negative then positive, as I was putting the positive terminal back on it sparked HEAPS, far more than normal, and smoke started coming out from underneath the startermotor (not from the starter, just the area) aswell as melting a bit of the + battery terminal. I have no idea whats going on and I really need some help...
post Apr 21, 2011 - 12:05 AM
+Quote Post
azn87

Enthusiast
****
Joined Aug 2, '06
From bay area
Currently Offline

Reputation: 21 (100%)




do u have a sound system with a compaciter? maybe the cap released its energy making the big jolt
post Apr 21, 2011 - 12:15 AM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




No sound system. Pretty much all stock.
post Apr 22, 2011 - 2:33 PM
+Quote Post
Spider77



Enthusiast
*****
Joined Jan 17, '08
From JB MDL, NJ
Currently Offline

Reputation: 30 (100%)




You do know you hook up the positive first, then the neg side for the battery (and disconnect in opposite order)?
post Apr 22, 2011 - 4:55 PM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




Ive always done negative first, thats what ive been told. Weird, regardless the problem happened before the terminals were removed and its still not workin for me :\. Im thinking its a bad earth but i'm not very good with electrics
post Apr 22, 2011 - 7:54 PM
+Quote Post
Spider77



Enthusiast
*****
Joined Jan 17, '08
From JB MDL, NJ
Currently Offline

Reputation: 30 (100%)




You still pulling that code?
post Apr 22, 2011 - 9:56 PM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




yeah
post May 1, 2011 - 5:03 PM
+Quote Post
fiveS-FTE

Enthusiast

Joined Apr 22, '11
From Massachusetts
Currently Offline

Reputation: 0 (0%)




To me it sounds like your Idler control valve has gone bad, this is very common to our cars. The perpouse of the valve is to bypass the throttle body, the throttle body is controlled by your accelerator pedal when you have your foot of the pedal the throttle body is completely closed. When it is closed there is no air going into the engine, thats were the IAC valve comes in, it lets the air enter I'm assuming you also have a rough idle? thats because the valve is filthy and can't maintain a good idle, it maintains a good idle by opening and closing rapidly.

-FiveS-FTE biggrin.gif
post May 1, 2011 - 7:20 PM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




QUOTE (fiveS-FTE @ May 1, 2011 - 6:03 PM) *
To me it sounds like your Idler control valve has gone bad, this is very common to our cars. The perpouse of the valve is to bypass the throttle body, the throttle body is controlled by your accelerator pedal when you have your foot of the pedal the throttle body is completely closed. When it is closed there is no air going into the engine, thats were the IAC valve comes in, it lets the air enter I'm assuming you also have a rough idle? thats because the valve is filthy and can't maintain a good idle, it maintains a good idle by opening and closing rapidly.

-FiveS-FTE biggrin.gif


It idles fine, no problem what so ever. The iacv is clear, ive had a look through all that and its fine, Ive fixed the starter motor today and now theeres no sparking but still having cranking problems car died again today and wouldnt even roll start, I had to get it towed from where i was. Im am pretty sure its a distributor problem but where to get one that doesnt put me completely out of pocket i dont know. Getting sick of this car now.
post May 4, 2011 - 11:20 PM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




changed the dizzy for a brand new one that came with coil and rotor andcap aswell, still no start
post May 7, 2011 - 12:02 PM
+Quote Post
Needles



Enthusiast
***
Joined Nov 18, '10
From montreal
Currently Offline

Reputation: 0 (0%)




i read somewhere that ur fuel pump will make too much noise when the wire are not connected properly

(the walbro do lots of noise , u can hear it from outside the car when the wire are not fixe solid)




btw, im getting sick of my car too lol, wont turn over, that worst lol

This post has been edited by Needles: May 7, 2011 - 12:03 PM
post May 7, 2011 - 12:11 PM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




have you tried replacing the ignitor?
post May 7, 2011 - 4:29 PM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




lol yep, know that feeling well needles.

I changed the igniter with another used one from a camry. It didnt make any difference so i changed it back to the original one from my car and I got it started, very low idle, revved it a couple times and about 1 minute later it died again and would crank but not start again. its definatly got fuel, I still am getting no spark or atleast a very weak spark. so far the Distributor, cap, coil, rotor, sparkplug leads, igniter, starter motor and battery have been changed... Im fresh outta ideas

found a bit of oil on the spark plug in the 1st cylinder..

This post has been edited by PolliS_5S-FE: May 7, 2011 - 4:34 PM
post May 9, 2011 - 2:58 AM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




Theres no spark on any cylinders
post May 10, 2011 - 10:59 AM
+Quote Post
luisitol

Enthusiast

Joined Apr 14, '06
Currently Offline

Reputation: 0 (0%)




I'm having a similar issue with my car. I'm thinking it may be the distributor as well as ther eis some oil on mine. I also already replaced the igniter & the fuel pump so I know its not those two things.
post May 10, 2011 - 11:34 AM
+Quote Post
xrav22



Enthusiast
**
Joined Jul 24, '08
From Canoga Park CA.
Currently Offline

Reputation: 0 (0%)




QUOTE (luisitol @ May 10, 2011 - 10:59 AM) *
I'm having a similar issue with my car. I'm thinking it may be the distributor as well as ther eis some oil on mine. I also already replaced the igniter & the fuel pump so I know its not those two things.

The problem with my car when it would randomly start was the temp sensor located at the rear of the top water hose. When I would wiggle the wiring harness car would start . then die. Well I found out the temp sensor there (right hand one from front view) was cracked inside after a new one it never happenned again. Worth a check
post May 10, 2011 - 2:45 PM
+Quote Post
Needles



Enthusiast
***
Joined Nov 18, '10
From montreal
Currently Offline

Reputation: 0 (0%)




maybe check ur ground setup.... rolleyes.gif
post May 11, 2011 - 12:42 AM
+Quote Post
PolliS_5S-FE

Enthusiast
**
Joined Aug 29, '08
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




grounds seem to be ok, i added another t oday and still no run. would the temp sensor being knackered cause no spark though.. :s??

3 Pages V  < 1 2 3 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 24th, 2024 - 5:28 PM