6G Celicas Forums

I have a 94 and I would like to know is it possible to do a front conversion
Of a later 6th gen...reason being so I can use fog lights.
Do I need to just purchase a front bumber and wiring harness to do so?
I'm new to this site and will post up pics of my celica soon

If it's a pre-facelfift model you could get pre-facelift fogs ..


i have a set for sale..

There is a preface fog and a facelift fog. on a us model there is no harness for the fogs, you must run it manually. what you can do to keep it stock as much as possible is get the lever type switch on the steering wheel or get an OEM pop in switch. you need to run a fuse in that line as well, but this will allow you to turn on the fogs no matter what on or off the car. and you can wire loom the wires. they sell fog wiring kits. if you want to run it only when the car is on, it must be on a relay. the 94-95 and 96-99 is the same concept, the only difference is the 96 must change bumper, turn signals, foam (dunno if its different, i don't remember when i did mine), fogs. I've had both bumpers and both fogs.

This post has been edited by trdproven: May 23, 2011 - 5:57 PM

I ran the fog wires from the headlight to the relay so i have no switch, considering the fact that the oem light arm is expensive and quite difficult to find. That way the fogs are on when the night lights are. Not exactly oem but looks good to me.

i like it on its own line, so you can run it at night by itself, stealth look. lol, but yea downside is if you forget to turn em off.