6G Celicas Forums

Anyone who has done it?

part is rare.

im thinking the washer from fj cruiser...

One of the mods I did when I re-sprayed the Celica...nice lower profile jet and finer spray.

I know member mak5603 has done the Volvo nozzle mod and he loves it. I don't know whether it not if it was from an S60, however. But it is Volvo part # 30655606.

I swapped out the washer nozzle from a new Camry, so I get the mist instead of a stream of fluid. Best mod evar.

I have them. Part number is in my progress thread.

Edit: just saw Hector's post. what he said, I love them.

This post has been edited by mak5603: May 30, 2011 - 12:23 PM

so guys it's perfect fit right?

my left nozzle is acting up and id like to replace it. that write up was on the celica-uk wiki but it couldnt see that anymore.

so the newer camry's nozzles fit too? which is better the camry or the volvo or they are the same?

Mine fit perfect.

I did it, they fit fine, don't lock into place but are a tight enough fit that it doesnt matter

oh so i goes in but doesnt click or lock and still snug enough to stay there. i will go replace mine with that!

So the Camry ones don't lock in or the Volvo ones don't lock in?

I'll try find some newer Toyotas and play around with their windscreen washer then find some Toyota P/N's

I have the Volvo ones on the front and the rear and they all click into place nicely like an OEM fit.

sweet. i didnt know that the it could be done on the rears as well!

It is slightly more fiddly for the rear washer jet as I didn't have too much slack in the rubber tubing, but it fits nicely.

This post has been edited by CelicaHD2: Jun 2, 2011 - 7:43 AM

I used to have S60 nozzels on my 6gc before I sold it. It was a cheap mod but was probably one of the better ones I did. I gotta do something similar on my Civic cuz the factory wash jets suck.

put them in a while back and they work just fine.

i put camry nozzles a few years ago, pulled em out a couple months ago and put em in my gt4 hood.

Nobody has had problem on putting the oem nozzle on a carbon fiber seibon hood? They dont fit.

What year S60 and can the nozzle be aimed up and down?

i got some from a 2003 at the junk yard , and no, you cant aimed them. All the volvo serie S have them but they are bigger then the s60. But i dint use non of them , I end up using some from a volvo 850 (1999-2006) .They sit flat and flush on the top and fitted perfectly on the seibon hood without no modification. I will save the others, if you want them,next time we meet.

This post has been edited by CoolZeen: Aug 13, 2020 - 2:00 PM