6G Celicas Forums

A friend of mine is selling me their 205/55/16 rims from their civic. Can anyone tell me if there is any rubbing or how this size fits on a 95 celica

civic rims dont fit and will never fit on a celica

Most likely wrong bolt pattern, and definately wrong offset

That's a tire size, not wheel size.

fyi newer civics are 5x100 and will fit maybe not as you would like them, may not be flush but will fit

ppl that always talk about do research sure do run to conclusions quick without knowing so much misinformation in this forum its sad

FYI civic 5 lugs are NOT 5x100... but 5x4.5 or 5x114.3

ppl that always talk about do research sure do run to conclusions quick without knowing so much misinformation in this forum its sad



Anyway... that tire size is about 1-1.5 inches too big based on speedo readings for the celica... but whether or not it'll "fit" is dependent on your definition of "fit"

This post has been edited by Kwanza26: Jul 11, 2011 - 10:08 PM

What about stock Camry rims 215/60/16

That's a tire size... not a wheel/rim size. Wheels/rims are generally listed by the rim diameter, followed by the width. Something like 15x7 (15 inches in diameter by 7 inches in width). In addition, there are other measurements as offset, listed by mm, and on occasion center bore diameter.

To answer your question, No... Camry wheels have a 5x114.3 pattern so Camry wheels do NOT fit. In addition, the tire size you listed (215/60/16) is a fatty passenger tire size and is too big for a celica.

Common Cars that have a 5x100 pattern... off the top of my head, Subarus... Volkwagens... Scion TC... Dodge neons... and they don't all necessarily fit the celica

205/55r-16 tires are too big for the celica.

What about this its

16'' Volt Racing Rims 16x7.5 et42



This post has been edited by m2736185: Jul 18, 2011 - 9:01 PM

You have just shown us ****ing holes in a rim.

PCD = 5x100

I don't htink this would fit any car? Lmao.
But seriously man, its not that difficult, if its not 5x100 bolt pattern, it will 100% not fit.

Poor noob.

poor moron, if you cant contribute to the topic how about to save yourself some time and dont reply. Obviously my question was if anyone could tell if that was a 5x100 bolt pattern. Trolls

Trolls be trollin'

I have contributed to your thread. I answered the question you asked in your first post.

Once you put in as much time as I have on this site you can tell me where to get off... Until then, read the signature.

How the **** can anyone tell a pcd by a picture. if it pay be 100 or 114.3 or 120 etc.

yea, well it turns out it didnt fit it was 114.3. It was a deal on CL I guess i gotta resell em now

5x100 is common to Celica and variants, and Subaru. Hard pressed to find any other common car which can straight swap wheels with us

I'm running 205/55R16 at the moment, they are about right for rolling diameter but it's utter **** 215/50R16 is the go

I found someone locally that drills rims to make them fit. What do you guys think about drilling?



This post has been edited by m2736185: Jul 23, 2011 - 10:45 AM

Seems sketchy... Only because those wheels are dual drilled already.