6G Celicas Forums

I need to roll my finders so bad. But they sent me a box full of **** and I don't know how to put em together. They didnt send instructions either. But I def want to put them on in the mean time

LOVE ITTTTT!!!!!! i wanted to get these soo bad until i found a great deal on GTS wheels.

wheels look dope bro

def will look into a set of them if i pick up another celi.

how much they run you if you dont mind me asking?

and did u order them from diamond wheel racing or w.e it is?

This post has been edited by Ted95: Dec 7, 2011 - 10:04 PM

Yeah there the DRW pro series. All together it was about 400 dollars

As in 400 for just the wheels or is that with tires too? i wouldnt mind snatching up a pair of these for auto-x this summer, and damn they do look good

No tires sense they were 15's. I just used the tires from my stock rims. I dont know if you want them for auto x there super heavy the website said 18 pounds a piece! way heavier then stock.

looks like im a month too late

Alright guys, I'm bringing this back so that I can make an educated decision on big wheels. I'm not looking for hella-flush, I just want big beefy wheels and tires to fill out the wells...

Big Wheels

The question is what will I need to get a +42 offset on these 9" wheels to fit on the my Abby (96 GT on eibach prolines w/GR2s)?

Stock offset isn't +42? I thought it was +35? Whatever. Just get an offset between 20-30 and you'll look good (depending on size). I have 17x8 +35 in the front and need about 5mm for flush. Same setup for the rears and need 10mm for flush.

pretty sure no one on this site has put a 9" width in the front. you would be the first.

Really? There's no one here with 9" wheels on their car?

how will an 18x7.5 with a +45 offset fit? Will i need any spacers to make them sit pretty flush? Im not looking to cut or roll my fenders.

This post has been edited by Por2geezcelica: Jul 21, 2011 - 2:59 PM

up to 9.5" has been done in the rear, but 8.5" is the highest for the front (as far as i know, and i have researched this a lot)

i think someone had some 9" wide crome rims in the front. it was a while back though...




dude, you'll need 20-25mm spacers. i dont know why people choose such high offsets....plus didn't someone mention that +45 wouldn't clear?

Honestly, that's really disappointing. I wonder if its different for the SuperStrut suspension....

Tell me about it. This exact wheel and size (17x9 +30) comes in 5x100 and is inexpensive, and I think it would look great on a celica! Someone please try it!

^ Those would look utterly clean on my Celi...resprayed, of course.

what wheels are those? they're sexy as hell!

They look like Rota Torques

I thought about picking up a set that was 18X9.5 with a +35 offset. I may try to fit those as one of my buddies has a set on his 2J powered Cressida

I have 17x7.5, ET45 with 215-40-17 tires and they clear just fine, there's plenty of room. I wouldn't imagine that an extra inch of diameter would make them not fit. I cannot wait to get rid of them in the Fall, I'm getting a set of Drag DR-31, 17x8, ET35. They look exactly like Rota Torques.

This post has been edited by HectortheRican: Jul 22, 2011 - 3:55 PM

ha your getting a rip off of the rip off?