Converting a ZR (ST204) to an AWD?, How is it done? |
Converting a ZR (ST204) to an AWD?, How is it done? |
Aug 25, 2011 - 7:59 AM |
|
Enthusiast Joined Dec 15, '02 From Tasmania(Australia) Currently Offline Reputation: 0 (0%) |
Found this one too, its has number plates so im assuming its registered but i didnt see it listed, it doesnt have headlight squirters, aftermarket front bar possibly, but its listed as WRC not a Group A, could just be a type-o. White 205 wrc This post has been edited by Cuts_the_Pilot: Aug 25, 2011 - 8:07 AM -------------------- ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582r
GRX133 Toyota Mark X 350s |
Aug 25, 2011 - 9:29 AM |
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
good luck having a crash in a cut and welded car, the crumple zones be fukt Have you done literally anything with cars aside from putting an intake and some cool glowing gages? If you've actually ever stripped a car down and know how they were built you'd never say something so foolish. Fifth Gear Season 11 Episode 1, Here is the exerpt. http://www.youtube.com/watch?v=yjxM9chAe1k -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Aug 25, 2011 - 9:37 AM |
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
+ let me reverse that question on you. have you performed such a crash test on a car you've welded together like that and gotten a different result?
... didn't think so. -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Aug 25, 2011 - 10:13 AM |
|
Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
when is all this going to stop.
some of us need to realize there are regular people out there with enough skills / ackonwlegde to build, create, invent pretty much anything. do I think is safe for everyone to convert a FWD celica to AWD on their backyard ? No, a lot of us dont have the skills to pull it off. I can come up with all the math needed for it, but when it comes to welding I'm a total ignorant. but yes, by all means we should give fensport a call about their 7th gen AWD monster, and rod millen to warn him about his AWD converted Celica. Yes you may say oh, but they are experts and they know what they are doing, well, unless said experts were brough over from outer space, I think over humans can match their level of expertise. given the choice between buying a AWD celica or converting mine to AWD, I will always choose to buy the factory AWD, because is a lot less work, but that doesn't mean that a car can't be converted safely on the hands of someone with the proper skills. -------------------- |
Aug 25, 2011 - 10:14 AM |
|
Enthusiast Joined May 14, '08 From Grand Island NY Currently Offline Reputation: 18 (95%) |
It was on TV, it must be true!
-------------------- 1994 Supra TT 1999 Cadillac Escalade (winter ride/tow truck) 1994 Celica GT-4 Converted 1998 Celica GT-4 Converted 1987 Corolla FX 1986 Corolla AE86 (Next Project) |
Aug 25, 2011 - 11:47 AM |
|
Enthusiast Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
when is all this going to stop. some of us need to realize there are regular people out there with enough skills / ackonwlegde to build, create, invent pretty much anything. do I think is safe for everyone to convert a FWD celica to AWD on their backyard ? No, a lot of us dont have the skills to pull it off. I can come up with all the math needed for it, but when it comes to welding I'm a total ignorant. but yes, by all means we should give fensport a call about their 7th gen AWD monster, and rod millen to warn him about his AWD converted Celica. Yes you may say oh, but they are experts and they know what they are doing, well, unless said experts were brough over from outer space, I think over humans can match their level of expertise. given the choice between buying a AWD celica or converting mine to AWD, I will always choose to buy the factory AWD, because is a lot less work, but that doesn't mean that a car can't be converted safely on the hands of someone with the proper skills. This is pretty well said. -------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
Aug 25, 2011 - 12:08 PM |
|
Enthusiast Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
+ let me reverse that question on you. have you performed such a crash test on a car you've welded together like that and gotten a different result? ... didn't think so. Umm you're comparing a previously wrecked and questionably repaired car to a car that precisely cut out and welded back in place. They bought a car that was repaired by a shop. There job is to get it done as quickly as possible otherwise they dont make money. Usually the people doing this are ultra conservative and take the time to do it right. I mean its a repair shop who knows how shotty there work is. I took my audi to get inspected and they couldnt even torque the wheels back on the car without torqueing them to over 200ftlbs causing the bolt to twist off when you tried to remove the wheel. They barely showed the 'repairs' on that car but you could see that the steel was not butted together correctly, there were probably multiple fractures in the steel that were never repaired. This just shows that the car wasn't repaired correctly. I will say I couldnt watch it with audio so I may have missed something they said. This post has been edited by czwalga: Aug 25, 2011 - 12:10 PM -------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
Aug 25, 2011 - 12:29 PM |
|
Enthusiast Joined May 15, '09 From yonkers, NY Currently Offline Reputation: 8 (100%) |
when is all this going to stop. some of us need to realize there are regular people out there with enough skills / ackonwlegde to build, create, invent pretty much anything. do I think is safe for everyone to convert a FWD celica to AWD on their backyard ? No, a lot of us dont have the skills to pull it off. I can come up with all the math needed for it, but when it comes to welding I'm a total ignorant. but yes, by all means we should give fensport a call about their 7th gen AWD monster, and rod millen to warn him about his AWD converted Celica. Yes you may say oh, but they are experts and they know what they are doing, well, unless said experts were brough over from outer space, I think over humans can match their level of expertise. given the choice between buying a AWD celica or converting mine to AWD, I will always choose to buy the factory AWD, because is a lot less work, but that doesn't mean that a car can't be converted safely on the hands of someone with the proper skills. culp you said exactly what i was thinking the whole time. i myself was considering doing a awd conversion, but for me it wouldn't work out and wouldn't be necessary. This post has been edited by spy00005: Aug 25, 2011 - 12:29 PM -------------------- *Thing i want for my car(i wish i had money)*
-light blue tint (next step will do this right after i get my paint job) WTB Reasonably priced Projectors just Lows |
Aug 25, 2011 - 5:02 PM |
|
Enthusiast Joined Jan 16, '07 From covington, KY Currently Offline Reputation: 9 (77%) |
So op how are you liking your celica? You should start a progress thread when you start your mods!
p.s. sorry everyone has been jacking your thread the site is not typically like this if you notice in other threads people tend to get along better. |
Lo-Fi Version | Time is now: November 23rd, 2024 - 2:17 AM |